Thermo Scientific Nalgene

Thermo Scientific Nalgene

Products (468)

Compare Tool

Select up to 3 products

  • Polyolefin Plastic Paper Sheets

    Thermo Scientific Nalgene

    Write on Thermo Scientific™ Nalgene™ Polyolefin Plastic Paper Sheets with almost any pen, marker, type or print. These sheets can roll or fold without cracking, stay flexible at cold temperatures and won't rip, stretch or shrink. They can be punched for use in binders or cut into...

  • Unwire Polycarbonate Test Tube Racks

    Thermo Scientific Nalgene

    Usable in cold rooms and at subfreezing temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated...

  • Polypaper Right-To-Know Labels

    Thermo Scientific Nalgene

    Improves laboratory safety with chemical-resistant, water-proof labels For safe storage of hazardous chemicals Pressure-sensitive labels incorporate Department of Transportation and National Fire Protection Association codes, symbols and pictorials of recommended safety equipment Includes 25 blank...

  • Safety Beta Radiation Shields

    Thermo Scientific Nalgene

    Acrylic Plastic Made of transparent acrylic plastic to give maximum protection against beta radiation during procedures such as nucleic acid sequencing, recombinant DNA studies, etc., using beta emitting isotopes Beta radiation from a 100 mCi point source of P 32 shows no penetration through a 9.5...

  • Polyproylene Pneumatic Trough

    Thermo Scientific Nalgene

    Replace metal-type troughs with the lightweight, corrosion-proof and quiet Thermo Scientific™ Nalgene™ Polypropylene Pneumatic Trough. This trough features tapered sides for nesting and a built-in gas inlet. There are no sharp corners or separate parts to lose. The built-in platform...

  • Biohazardous Waste Containers

    Thermo Scientific Nalgene

    Conduct secondary containment of biohazardous waste with Thermo Scientific™ Nalgene™ Biohazardous Waste Containers, which feature convenient one-step sterilization—no need to remove the bag. A port opening in the cover allows for one-handed disposal of materials, limiting exposure...

  • PETG Serum Vials with Continuous Thread

    Protect against leakage, breakage, and contamination with Thermo Scientific™ Nalgene PETG Serum Vials. These serum vials are lighter in weight than glass, and are made for use with lined continuous-thread closures (available separately). PETG Non-cytotoxic Non-pyrogenic Packaged in trayless...

  • Cryoware Marker Set

    Thermo Scientific Nalgene

    For permanently marking cloth, cardboard and plastic Red, green, blue and black ink will not fade at ultra-low temperature Smudge-proof Consists of four, extra-fine point pens in red, green, blue and black.

  • Felt Tip Marking Pens

    Thermo Scientific Nalgene

    For use on glass, porcelain, metals and plastics including Teflon® Suitable for recording data in Nalgene Notebooks with PolyPaper ® pages Quick-drying, permanent black ink Non-refillable Markings resist limited exposure to dilute aqueous acids and alkalies; not intended for prolonged immersion in...

  • Centrifuge Bottle Adapter

    Thermo Scientific Nalgene

    Polycarbonate For use with Nalgene 3145 series

  • Boston Round Narrow-Mouth LDPE Bottles with Closure: Bulk Pack

    Package, ship and store a variety of reagents using Thermo Scientific™ Nalgene™ Boston Round Narrow-Mouth LDPE Bottles with Closure, constructed from natural low-density polyethylene. Key Features Durable and clear Uniform walls that resist splitting and puncturing Leakproof when used...

  • Wide Mouth Unitary Wash Bottles

    Thermo Scientific Nalgene

    Design eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than...

  • Unwire Half-Racks For 30 mm Test Tubes

    Molded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and...

  • Low-Density Polyethylene Sample Vials

    Supplied with snap-on caps. Capacities with o.d. x height given below.

  • Certified Clean PETG Containers

    Thermo Scientific Nalgene

    Protect against leakage, breakage and radiation contamination in cleanroom applications with Thermo Scientific™ Nalgene™ PETG Certified Clean Containers. Suitable for pharmaceutical and biotechnology applications that require processing and storing bulk intermediates and critical...

  • White Polycarbonate Cryogenic Vial Holders

    Designed for maximum convenience and one-handed operation Bottom of each well interlocks with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold 1.2,...

  • Polypropylene Spigot Closure

    Thermo Scientific Nalgene

    Nalge 6423 1-1/8-12 female screw thread closure fits all Nalgene carboys with spigot Use in place of spigot to provide leakproof seal when autoclaving liquids in a carboy, or when transporting or handling carboy to prevent accidental opening of the spigot.

  • Nalgene™ Pharma-Grade Platinum-Cured Silicone Tubing

    Tasteless, odorless, non-cytotoxic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding suface to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures...

  • Pipet Cleaning Equipment Sets

    Thermo Scientific Nalgene

    Acquire everything you need to clean pipets with the Thermo Scientific™ Nalgene™ Pipet Cleaning Equipment Sets. Each of these conveniently packaged sets features a basket, jar and washer. A larger size is available to accomodate up to 32" (81cm) long pipets. Features: All are made...

  • Fluorinated High-Density Polyethylene Carboys

    Useful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap

  • Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    For retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.

  • Test Tube Baskets For Washing and Autoclaving

    Constructed of polypropylene Baskets hold test tubes, centrifuge tubes and bottles Designed for autoclaving, washing and incubating Each basket comes with a permanently attached lid. Tapered sides allow baskets of the same size to nest for storage. Slotted to allow complete drainage and circulation...

  • Pharmaceutical Graduates, Plastic

    Thermo Scientific Nalgene

    Excellent chemical resistance Nalgene 3673 Double-scale Transparent, shatterproof polymethylpentene Graduated in ounces and milliliters. Smaller sizes are also graduated in drams. Volumes are easy to read with no meniscus. Smaller sizes useful as measuring graduates because the flared, wide mouth...

  • Economy Polypropylene Graduated Cylinders

    Large, easy-to-read raised graduations Large rounded bases are ribbed for reinforcement and stability All sizes have generous pour spout; 10 mL size has a conical top for easier filling and pouring; non-wetting Calibrated to contain and deliver at 20°C Autoclavable, but repeated autoclaving will...

Compare Tool

Select up to 3 products