Thermo Scientific Nalgene

Thick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide leakproof service. Can withstand the...

Nalgene® Disposable Robotic Reservoirs 300 mL capacity Sterile or non-sterile Uniquely designed, polypropylene reservoirs have a 300 mL capacity and are in accordance with the proposed SBS Microplate standards. Disposable robotic reservoirs make automating many assays easy. Two styles of...

Carry out a variety of applications with these tubes, which combine the superior separation and pelleting of a conical tube with the higher sealing capability of an Oak Ridge tube. Thermo Scientific™ Nalgene™ Conical Oak Ridge Graduated Polypropylene Centrifuge Tubes can spin up to...

1753C67 is a standard spigot for carboys (Nalge 6422) 1753D30 spigot is needle type for tanks (Nalge 6421) Both are polypropylene with thread size 1 1/8” - 12 female screw thread Includes removable tubing adapter for smaller tubing; fits sizes (1/4” or 5/16” i.d.) 5/8”...

Ideal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen prevents bar entry into...

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. With sealing cap closure option. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity for proper performance. Polypropylene screw closure...

Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’...

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Nalgene™ Mr. Frosty containers provide a simple-to-use system designed to achieve a rate of cooling very close to -1°C/minute, the optimal rate for cell preservations. Three sizes to accommodate volume range from 1-5mL Hold 12 to 18 tubes and has profile height of 86 or 151 mm (3.4375 or...

Wide mouth, Fluorinated HDPE Nalge 2197 series Provides improved barrier properties and reduces solvent absorption and permeation Fluorinated inner and outer surface Useful with acids, alkalies and organic solvents Leakproof Fluorinated polypropylene screw cap closure

Sterile and disposable with screw cap One-time use Made of clear, PETG plastic Polyethylene screw closures Individually bagged Single-use, disposable flasks reduce the chance for cross contamination. Sterilized using gamma irradiation and individually bagged for protection and convenience. Graduated...

Nalgene® 7130 Of high-density polyethylene Divided lengthwise by fixed central partition with molded handle Dimensions shown are length x width x depth.

POLYPROPYLENE, NALGENE Polypropylene Nalge 7012 Of thick polypropylene, with rolled rim, nylon-coated handle and polypropylene grip Interior is graduated in quarts and liters With steel support ring encircling pail near rim and removable, steel bail handle Autoclavable Available with and without...

Save space with chemical- and break-resistant Thermo Scientific™ Nalgene™ Square HDPE Graduated Bottles with Closure. These translucent bottles provide visible liquid levels and molded-in graduations for easy measuring. Square bottles with polypropylene closures feature space-saving...

Guarantee leakproof services with secure-fitting Thermo Scientific™ Nalgene™ Replacement Screw Closures for Nalgene Carboys. Made to fit Nalgene Carboys † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a)...

Closure with Silicone Grommet for Nalgene # 2227-0020

Autoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.

Store and ship small volume, valuable reagents with Thermo Scientific™ Nalgene™ Natural HDPE Diagnostic Bottles without Closure, for use in test kits and small-volume applications. These high-density polyethylene bottles are packed without closures so they can be matched with various...

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking and features a spigot installed for draw off. Ideal for less rigorous applications. Available in sizes...

Nalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.; 15 liter...

Guaranteed unbreakable Greater resistance to thermal shock than porcelain Fire polished, corrosion-resistant, inert, non-stick glass surfaces bonded to metal Marked with numbered quadrants for easy location of crucibles and other containers, allows use by several people Diameter 9 inches; fits...

The Thermo Scientific Nalgene Stopcock Assy 25ml is designed for precise control over fluid flow in laboratory settings. This durable assembly is crafted from high-quality materials to ensure longevity and performance. Its design minimizes leaks and provides reliable operation for various...

Protect light-sensitive products with Thermo Scientific™ Nalgene™ Wide-Mouth Translucent Amber HDPE Packaging Bottles. These translucent, high-density polyethylene bottles meet USP requirements for light-resistant containers. Features: Translucent amber HDPE bottle with opaque amber PP...

Suitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high, 6”...