Select up to 3 products
General purpose laboratory glass thermometers Red and Blue Spirit liquid filling Uniquid Non-Roll devise attached Packaged in square plastic tubes for storage Verticle numbers for easy reading Permanent markings, numbers and lines Total immersion
Thermco's ACCU-SAFE Non-Toxic thermometers are filled with a biodegradable organic liquid and dye, which eliminates the hazards of mercury in the case of breakage and/or disposal. The safety-coated thermometers protect against breakage and contain the liquid and glass inside the coating for safety...
Thermco™ LogTag™ LTI-HID Interface Cradle, with built-in drivers, replaces the current LTI/USB interface
Listed are made in accordance with specifications of the American Society for Testing and Material. Strict manufacturing procedures and quality controls insure full compliance to ASTM E-1. These instruments are made from annealed glass and have been extensively aged for minimal scale error and...
Holder has 5 Holes of Assorted Diameters Holds Thermometers,Test Tubes, Electrodes, etc. Stainless Steel Clip and Platform with Rubber Pads
The Thermco environmentally friendly spirit filled thermometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features -5 to 15 degree C range with 0.5 degree C divisions.
The ACCD750P and ACCD755P Handheld Pt100 thermometers are high precision, metrology grade, NIST traceable Instruments. These high accuracy thermometers are used when temperature measurement are critical and/or when online documentation is required. The 750P and 755P are also used as a NIST Standard...
The Thermco Accutherm bulb immersion thermometer is suitable for use in research laboratories and general-purpose applications.
Certified at -20, 0, 4, 25, 37, 44.5, 105, 120, and 180°C Waterproof Platinum Pt100 Accuracy ±0.3°C Inlcudes probe Hold function Range -100/+300°C Min/Max, Hold, & Averaging Function
ASTM - Thermometers Listed are made in accordance with specifications of the American Society for Testing and Material. Strict manufacturing procedures and quality controls insure full compliance to ASTM E-1. These instruments are made from annealed glass and have been extensively aged for minimal...
NIST Traceable w/Certificate Pocket Size 4.5" x 2.5" x .5" Attached Bench Stand Minimum / Maximum Memory Programmable High / Low Alarm Data Hold / Test Function C/F Switchable Range: -50° /300°C & -58°/572°F Resolution: -20° to 200° = 0.1°, outside...
Each thermometer is individually serialized and calibrated against standards traceable to NIST & DKD in our PJLA approved calibration laboratory. Thermco has an extensive line of LIG Red & Blue Spirit Non-Toxic Thermometers, Mercury (Hg) Thermometers, PTFE Safety Coated Thermometers, for use in...
Thermco’s ASTM - Precision Factory Certified Thermometers are calibrated against NlST standards and comes with a calibration document showing corrections to the nearest tenth of a scale division traceable to NIST. These thermometers meet with all prescribed ASTM requirements. Each incorporates...
Thermco's offering of hydrometer include glass & plastic Hydrometers in the following scales.. Specific gravity baume and density hydrometers, ATSM & API Hydrometers, Alcohol Hydrometers, Brine Brix Hydrometers and Combined Form. Thermo-Hydrometers. Thermco's Hydrometers are commonly found in the...
The Thermco environmentally friendly spirit filled thermometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features 20 to 130 degree C range with 1 degree C divisions. Application: For Ovens
General purpose laboratory glass thermometers Red Spirit liquid filling Packaged in square plastic tubes for storage Vertical numbers for easy reading Permanent markings, numbers and lines Partial immersions Several Ranges and Lengths
Safely Holds Up to 25 Thermometers This polypropylene rack holds up to 25 thermometers in a safe vertical position to avoid damage while drying. Hole diameters in the top and middle plates are 7.9mm (5/16”) while the bottom plate has only. 3.2mm (1/8”) diameter drain holes. The distance...
The Thermco GW300H Combined Form Density Hydrometer is designed for precise density measurements in a range of 600 to 650 kg/m³. With a division of 0.5 kg/m³, it ensures accurate readings essential for various scientific applications. Its construction allows for use within a temperature range of...
A CDC / VFC compliant ISO/IEC 17025 NIST traceable temperature data logger for monitoring & recording temperatures of vaccines in refrigerators or freezers. The UTREL30-16 measures and stores up to 16,129 readings without needing off loading of data, thats 5 months of recordings @ 15 minuite...
Thermco® spirit filled ASTM thermometers are made in accordance with specifications of the American Society for Testing and Material. Strict manufacturing procedures and quality controls insure full compliance to ASTM E-1. These instruments are made from annealed glass and have been extensively aged...
Thermco’s new Dual Probe AccuTherm 8017 data logger is the most powerful logger to date. Designed to meet today’s CDC’s and VFC’s requirements for vaccine storage and monitoring. Monitor both the refrigerator and freezer temperatures simultaneously or add the optional...
Thermco has an extensive line of LIG Red & Blue Spirit Non-Toxic Thermometers, Mercury (Hg) Thermometers, PTFE Safety Coated Thermometers, for use in laboratories, universities, pharmacies & healthcare facilities, breweries and distilleries and more. Red Spirit
4 1/2” Stainless Steel Stem w/Probe Cover Waterproof NIST Traceable w/Certificate C/F Switchable Range: -50°/150°C & -58°/302°F Resolution: 0.1° Accuracy: ±1.0°C between -20° to 120°C
The Thermco spirit filled thermometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features 0 to 230 degree F range with 2 degree F divisions.