SP Bel-Art

This slide holder has a sloped groove that accepts up to 10 single or double slides standing on end. Front ledge serves as a place to dry slides Made of durable polystyrene

Perfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly pressing down against...

Low-Cost, Accurate Method of Colony Replication Utilizes a locking ring which secures sterile velveteen squares onto a PVC cylinder for easy control of the plating device. To produce replicas, the Petri dish carrying microbial colonies is inverted and lowered onto the cloth surface, then lifted. A...

Reduces spills and potential for breakage and injury Threads directly to bottles with GPS No. 38-430 or 38-400 threads This dispenser fits many 2.5 & 4 liters, 5 pint (80 fl. Oz), ½ gallon & 1-gallon jugs and bottles. To use, squeeze the smaller bottle and depress the top button to immediately stop...

2-Piece design requires no lubrication A quarter turn shuts off flow. Maximum pressure rating: 48 KPa (7 psi), 50cm of water. Easy, snap-together assembly creates a tight seal Select a size betweento fit tubing of 3/8 or ½" (9.5 or 12.7mm) I.D. Barbed connections

Lower density polyethylene, with delivery tube mounted in polyallomer screw cap Delivers single drops or steady narrow stream One-piece delivery tube and cap

High-density polyethylene Octagonal shape Not leakproof Ideal for dry materials

The stainless steel wire frame and bottom is designed to securely support the bag and its contents. In addition, the polypropylene bottom also serves as a containment tray in the event of inadvertent bag leakage. Tray is safety orange in color for easy identification as a biohazard containment...

The curved handle design of the Sterileware® Bent Handle Sterile Scoops positions the hand further from the sample when compared to straight handle scoops. Reduces the possibility of sample contamination and exposure of hands or personal protective equipment (PPE) to unwanted substances Flat...

A smooth, tapered, stainless sampler for extracting a “plug” of material from bags or blocks of cheese, grease, soap, clay, etc. Sharp end of the satin finish sampler will cut through a bag or box Twisting the handle one-half turn will cut out a plug of material 15.2cm (6") long...

Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger footprint Wall-mount...

Digital Readout for Exact Measurement Take measurements with speed and ease using the Digi-Max™ digital slide caliper. The LCD display immediately indicates the exact measurement taken with push button selection between metric and English scales and a self-zeroing feature for accuracy of...

For standard taper joints Knurled gripping-ring at top, which allows quick, simple removal from joint Easily cleaned For use with full or medium joints Three gaskets per package. Joint size given in listings below.

This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm diameter test...

Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

Available in blue or white to allow for effective sample contrast, these sterile ladles are useful for sampling liquids and creams. Upright handle allows for sampling from above container Curved handle end provides secure withdrawal of sample Fits into 2” openings such as a 45-gallon drum...

Enhance your laboratory's efficiency and safety with SP Bel-Art's Polypropylene, 24-Position Scintillation Vial Rack. This robust rack, specifically designed for radioactive material containment, is crafted from high-quality polypropylene ensuring maximum resistance to chemicals, high temperatures,...

Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (1/16 to 3/4") O.D. Spring-loaded jaw will remain closed for safety when not in use Replaceable, hardened steel blade makes clean, straight cuts

2-way and 3-way Connections This polypropylene stopcock has a detachable, watertight and inert Teflon® PTFE plug that contacts any fluid being dispensed. The barbed fitting end accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing. Three-way models allow connection of two or three arms. Pressure rating is...

A variety of magnetic stirring bars from 159mm (6") to 10mm (0.5") bars are supported on the Garage. Wires on the upper half of the rack are arranged close together and designed to capture smaller magnetic stir bars; larger bars are captured on more widely spaced wires in the lower half of...

Ideal for Staining Slides Low-density polyethylene Can be used as squirt bottles with the supplied tube, and/or as dropper bottles without tube Excellent for use with indicator solutions or dyes

Equip your laboratory with a reliable and efficient tool for dispensing various liquids. These Trigger Sprayers, equipped with 53MM Adapters, are designed to meticulously control the distribution of liquids, thereby reducing waste and ensuring precision. Sold in convenient packs of two, these...

Stop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy to find what you need Includes commonly used sizes of connector and stopper...