Simport Scientific Supplies

Made of acetal polymer This model can hold up to six tissue specimens, each one placed in it's own 7 x 12mm (1/4 x 7/16") compartment, numbered from 1 to 6. No biopsy pads necessary. Cover and base have over 2000 square openings to maximize fluid exchange and ensure proper drainage....

Made of polyester urethane foam Simport biopsy foam pads are used to hold biopsies in place and prevent them from being lost during processing. They are made of a specially formulated foam which is always verified for consistency throughout in order to achieve optimum solvent flow. Biopsy samples...

5.0mL ClickLok™ MCT with snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.

Made of acetal polymer These disposable plastic cassettes hold tissue specimens during processing and embedding, as well as in storage. Molded from a special high-density polymer, they keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological...

Made of polystyrene These 50 x 9 mm sterile petri dishes with absorbent pads are ideal for culturing micro-organisms on either agar or broth based media. Designed to accommodate 47 mm diameter membrane filters. These dishes are stackable and have squared off edges on both the top and bottom which...

At last a tamper evident multi purpose container for mailing, staining or storing microscope slides. Constructed of extra-strong and clear polypropylene, it will hold up to 4 standard 3 x 1 in. or 75 x 25 mm slides vertically. Inside channels are slotted to keep slides safely separated. Perfect also...

Made of polypropylene This convenient space saving rack was designed especially for storing and working with PCR samples. The PCRack™ will accept all models of 0.2 mL tubes, along with strips of 8 or 12 tubes. 96-well PCR plates can also be accommodated. The PCRack™ can be horizontally...

Tubes are made of autoclavable polypropylene and are available either individually or in strips of 8 or 12 detachable tubes. Tubes have a gross volume of 1.2 ml but with a cap in place, they will hold 1.1 ml. Caps are made of polyethylene and are not autoclavable. They are available individually and...

Made of acetal polymer This model of cassette is similar to Series M498 and is specially designed to hold biopsy specimens during the embedding process. Each case contains 3 dispenser boxes of 500 cassettes.

Made of Polypropylene T347AQX screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures. The septum also acts as a silicone o-ring for better sample protection. It is...

The unique snap valve pour spout is easily popped open and offers dripless pouring Specially designed leakproof screw cap with liner for safer transport Large centrally located handle for good balance and ease of manipulation Metal free and resistant to hydrochloric acid In regular position, sample...

Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” bottomed thermal cyclers such as MJ Research, Perkin...

Made of antistatic polystyrene Simport Weighing Dishes will resist diluted acids, aqueous solutions, alcohols and bases. They are ideal for many applications such as weighing, dispensing or storing. They are safe, contaminant-free, biologically inert, economical containers for weighing liquid or...

2ml External Thread, Freestanding Cryovial, Sterile, Silicone Seal, 100/bag, Certified DNase, RNase, Pyrogen and DNA Free.

BioBlock™ Deep Well Plates Made of polypropylene The 2.2 ml well capacity (2.1 ml when capped) plate is used mainly for compound storage and enzyme assays. Approved to be used with Qiagen equipment. It is available in natural and four different colors. DMSO resistant. Packed in a bag of 4...

Designed for storing biological material, human or animal cells, at temperatures as low as -196°C (but should only be used in the gas phase of liquid nitrogen). The external threaded cap features a long skirt for one hand aseptic methods, and a super-fast thread design that allows tightening or...

Made of polypropylene Designed for oil-free operation, these tubes are made of transparent superior quality grade polypropylene for better viewing of the contents. Their ultrathin wall design will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Attached...

Made of polypropylene These low profile 96-well PCR plates are similar to the regular Simport® AMPLATE™ Series plates. However, each of the 96 tubes has a smaller volume (only 100 µl) and thereby reduce the dead space between sample and cover. They are thin-walled and designed for...

Tube made of polypropylene / Cap made of polyethylene Conical bottom tubes with self-standing base graduated from 10 to 30 ml and 10 to 50 ml respectively in 5 ml increments. Chemically resistant and shatterproof, they are supplied with a leakproof screw cap, particularly important when transporting...

Cover made of polystyrene Base made of high impact polystyrene Cover has numbered squares for easy sample identification Two corners of cover and base are cut to prevent misalignment Vials readily visible through transparent cover Vial picker included with every box Air vents minimizing condensation...

Made of acetal These disposable plastic cassettes hold biopsy specimens during processing and embedding, as well as in storage. Very convenient for cassette labeling instruments since the covers are packaged separately in the case. Molded from a special high-density polymer, they keep specimens...

Made of ABS Plastic This 10-slide StainTrayTM offers the same great features and benefits as the M920 Model.Dimensions with cover: 24 x 24 x 4.5 cm H (9 3/8 x 9 3/8 x 1 3/4 in. H)

Made of acetal polymer Similar to M492 but specially designed to hold biopsy specimens during the embedding process, as well as in a storage cabinet. Anterior writing area is at a 45° angle to make the cassette more suitable to be used with certain types of cassette labeling instruments. Each...

Made of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box, and is keyed...