Ricca Chemicals

Ricca Chemicals

Products (1328)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Ricca Ferrous Ammonium Sulfate

    The Ricca Chemicals 0.00282 N ferrous ammonium sulfate solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

  • Potassium Iodide, 10% (w/v) Aqueous Solution

    Formula: KI Formula Weight: 166.00

  • Lead Acetate, Trihydrate, 9.5% (w/v) Aqueous Solution

    Formula: (CH3COO)2Pb•3H2O Formula Weight: 379.33 CAS Number: 6080-56-4

  • Ricca Copper Sulfate Solution

    The Ricca Chemical 1 Liter copper sulfate solution works as an antimicrobial and molluscicide and helps in the preparation of fungicide, algaecide and herbicide in agricultural settings. Application: For UL Corrosion Test

  • Ricca Iodine Monochloride Solution

    Iodine monochloride is an interhalogen compound with the formula ICl. It is a red-brown chemical compound that melts near room temperature. Because of the difference in the electronegativity of iodine and chlorine, this molecule is highly polar and behaves as a source of I?. Application: For Iodine...

  • Sodium Chloride-Hydroxylamine Sulfate 1L

    Formula: NaCl and (NH2OH)2•H2SO4 Description: For Cold Vapor Atomic Absorption Analysis

  • Ricca ACS Reagent Grade Lead Acetate Trihydrate

    The Ricca Chemicals ACS reagent grade lead acetate trihydrate is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

  • Titration Solvent, for Neutralization Number of Petroleum Products

    For Neutralization of Petroleum Products

  • Potassium Chloride Conductivity Standard, 2767 µS/cm at 25°C, 0.02 Molar

    You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.

  • Ricca Phosphoric Acid

    Ricca Chemical

    Phosphoric acid is a colorless, odorless phosphorus-containing solid, and inorganic compound with the chemical formula H3PO4. It is commonly encountered as an 85% aqueous solution, which is a colorless, odorless, and non-volatile syrupy liquid.

  • Xylenes ACS

    Ricca Chemical
  • Ricca 5% (w/v) Potassium Iodide

    The Ricca Chemicals 5% (w/v) potassium iodide is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

  • Antimony AA Standard

    Ricca Chemical

    Formula: Sb in 20% HCl Formula Weight: 121.75

  • TSS Standard, 500 mg/L

    TSS Standard, 500 mg/L 1 L

  • Tween 20, 0.05% w/v

    Ricca Chemical

    Tween 20, 0.05% w/v 500 mL

  • Calcium ICP Standard

    Ricca Chemical

    Formula: CaCO3 in 3% HNO3 Formula Weight: 100.09

  • Ricca Sodium ICP-MS Standard

    The Ricca Chemicals sodium ICP-MS standard with a composition of water, nitric acid, sodium carbonate, is suitable for use in laboratory use only. It can be stored at a temperature of 15 to 30 degree C.

  • Ricca 0.2 Normal (N/5) Sulfuric Acid

    Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

  • Ricca 0.141 Normal Silver Nitrate

    Silver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.

  • VeriSpec™ Silver (Ag) Standard for AAS, 1000 ppm in 2% HNO3

    Matrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility

  • VeriSpec™ Manganese Standard for ICP/MS, 100 ppm in 2% HNO3

    Matrix: 2% HNO3 Min: >= 99.5 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility

  • VeriSpec™ Cesium Standard for ICP/MS, 10 ppm in 2% HNO3

    Matrix: 2% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility

  • Zinc Sulfate, 1 M

    Ricca Chemical

    Zinc Sulfate, 1 M 500 mL

  • < Previous
  • > Next

Compare Tool

Select up to 3 products