labForce® Supplies & Equipment

labForce® Supplies & Equipment

Products (2867)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Thomas Traceable Total-Range Thermometer

    labForce® (powered by Thomas Scientific)

    For use with any Type K probe/flip stand for bench-top use Temperature range is -328° to 2498°F and -200° to 1370°C Resolution is 0.1° and 1° Accuracy is ±0.2°C or ±1°C between -20° to 100°C Minimum/maximum memory/alarm/supplied with Type K probe...

  • Sharp Elite™ Clean Pack Reloads

    labForce® (powered by Thomas Scientific)

    Housed in clean particulate-free PET packaging, Clean Pack Reloads are the perfect option for cleanroom environments. Reloads Save time & money! Reduce waste by reusing autoclavable tip boxes Budget friendly—less expensive than pre-racked tips Reload 96 tips in 3 seconds or less 100%...

  • Thomas Ogg Combustion Flasks

    labForce® (powered by Thomas Scientific)

    6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000 mL...

  • Wiley® Model 4 Replacement Blades

    labForce® (powered by Thomas Scientific)

    23A00D312: MODEL 4 WILEY MILL, Replacement Rotating Blades, set of 4, Standard Tool Steel 23A00D313: MODEL 4 WILEY MILL, Replacement Stationary Blades, set of 6, Standard Tool Steel 23A00H892 - 23A00H897: Available in the following materials:      * Standard Tool Steel *...

  • Mini Magnetic Stirrer

    labForce® (powered by Thomas Scientific)

    An economical solution made for ultimate function The Mini Magnetic Stirrer by labForce® is an economical solution made for ultimate function with optimal magnetic coupling to ensure dependable stirring efficiency. A powerful magnetic coupling of the high-quality stir bar and the unit ensures...

  • Thomas Weighing Papers

    labForce® (powered by Thomas Scientific)

    Economical Smooth, strong and non-absorbent with glossy surface Especially suitable for weighing powders. Packs of 500 sheets.

  • Standard Weighing Boats

    labForce® (powered by Thomas Scientific)

    labForce® flexible polystyrene weighing boats feature smooth surfaces to provide accurate pour-outs with minimal sample loss. Manufactured and packaged in a clean room Select white or blue for best color contrast to ensure sample is completely removed Biologically inert and resistant to dilute...

  • Thomas Scientific Calibrated Sale Weights

    labForce® (powered by Thomas Scientific)

    Thomas Scientific Calibration Weights are solid construction and made with non-magnetic stainless steel. OIML E2 can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. OIML...

  • Thomas Traceable Conductivity Calibration Standards

    labForce® (powered by Thomas Scientific)

    Sixteen ounces of liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment Calibration standards are traceable...

  • Thomas® Ascarite II CO2 Absorbent

    labForce® (powered by Thomas Scientific)

    Thomas® Ascarite II CO2 Absorbent is an aggressive, high performance quantitative absorbent of carbon dioxide. Utilized by the US military, Ascarite II can be used in environmental labs, chromatographic applications, and chemical and steel manufacturing plants. Its wide range of uses...

  • Thomas Traceable Expanded Range Thermometer F/C

    labForce® (powered by Thomas Scientific)

    Small, lightweight and shockproof Temperature range is -40° to 2000°F or -40° to 1200°C Resolution is 1° Accuracy is ±(1°C + 1%) from 0° to 750°C and 32° to 1382°F Thermometer comes with two Type-K probes. Unit measures 3” x 5” x 1”...

  • Posi-Lock™ Small Cap Microcentrifuge Tubes

    labForce® (powered by Thomas Scientific)

    Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume...

  • API Non-Mercury Thermo-Hydrometers

    labForce® (powered by Thomas Scientific)

    Degrees API @ 60°F Made from heavy-walled, annealed tubing for maximum strength Built-in, non-mercury thermometer Lead-free ballast Conforms to ASTM accuracy requirements Each thermo-hydrometer comes with a Certificate of Conformance traceable to NIST. Bio-degradable, non-mercury performance liquid...

  • Wiley® Floor Stand

    labForce® (powered by Thomas Scientific)
  • Vortexer V-32 Vortex Mixers

    labForce® (powered by Thomas Scientific)

    Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3200 rpm The Vortexer V-32 sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the Vortexer V-32 provides smooth instant...

  • Thomas Reagent Reservoirs

    labForce® (powered by Thomas Scientific)

    Choose from four styles - 25 mL Divided, 25 mL , 50 mL and 100 mL “V” bottom design allows for maximum recovery of reagents Graduated with convenient pouring spouts at all four corners Extra wide base for increased stability Unique “Nesting” feature makes separation of bulk...

  • Posi-Click 1.7 ml Microcentrifuge tubes

    labForce® (powered by Thomas Scientific)

    Boil-proof cap Withstand 28,000 x g Easy to open, easy to close Double, high pressure locking ring RNase, DNase and pyrogen free Unsurpassed clarity Frosted writing surface and graduations Ultra smooth interior-low liquid retention Made from highest quality, virgin, single melt polypropylene Our...

  • Hexagonal Weighing Boats

    labForce® (powered by Thomas Scientific)

    labForce® flexible polystyrene boats feature smooth surfaces to provide accurate pour-outs with minimal sample loss. Bend flexible boats at points to form pour spouts Flat bottoms and sloping sides provide accurate transfer Biologically inert and resistant to dilute and weak acids, aqueous...

  • Amplifyt® 96-Well PCR Plates, Full-Skirt

    labForce® (powered by Thomas Scientific)

    96 Well PCR Plate, Full Skirt, Clear or White 96 x 0.1ml wells (low-profile) Compatible with a broad range of thermal cyclers including many Biorad and Eppendorf instruments Flat Top for ideal sealing with Automated and Manual Seals Slightly Raised Rim around Each Well for improved sealing with...

  • Pre-Assembled Clear Tall Wide Mouth Jars

    labForce® (powered by Thomas Scientific)

    Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. You can completely empty the contents of these straight sided jars. Choice of three caps: The F-217 foam lined cap provides a seal with the least oxygen transfer The poly cone lined cap seals both...

  • Thomas Traceable® Dew Point/Wet Bulb/Humidity/Thermometer

    labForce® (powered by Thomas Scientific)

    Relative humidity range is 1 to 99% Resolution is 0.1% RH Accuracy is ±4% RH between 35 to 75%RH, ±5%RH otherwise Humidity features include dew point/wet bulb functions, minimum/maximum memory and high/low alarms Temperature range is -40 to 158°F and -40 to 70°C Temperature...

  • labForce&reg; Wash Bottles

    labForce® (powered by Thomas Scientific)

    labForce® vented wash bottles are made from industrial grade low-density polyethylene with polypropylene stem closure and venting assembly. They are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards,...

  • Mini Mill Sieves

    labForce® (powered by Thomas Scientific)
  • Sharp Elite™ LTS®-Compatible Pipette Tips

    labForce® (powered by Thomas Scientific)

    Experience pipetting excellence with Sharp Elite LTS® — the perfect drop-in replacement for your LTS® pipettors. Sharp Elite LTS tips are designed to precisely fit  Rainin® LiteTouch®  Pipettors.  Available in a variety of options from LTS filter tips to reloads,...

  • < Previous
  • > Next

Compare Tool

Select up to 3 products