Select up to 3 products
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the...
Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and...
Conical Reaction Vial, Heavy Wall, Graduated, Synthware, Multiple Sizes available, Joint: 5/5, 7/10, or 14/10 available.
Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.
Ideal for any laboratory setting, this Heavy Wall Beaker stands out for its sturdy construction and practical design. Its low form shape allows for efficient mixing and heating of solutions, while the heavy wall construction ensures durability and long-lasting performance, withstanding even high...
Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
Adapter is placed above flask to prevent carry-over of reactions which have a tendency to foam. With top outer and lower inner standard taper joints.
Hickman-Hinkle Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.
Desiccator with lid and ceramic plate.
Stopcock, Double Oblique, PTFE, Synthware, Bore: 2 or 4mm available, Plug Size: 12.9/44 or 14.4/44 available, Stem OD: 8 or 10mm available.
Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.
With a joint at 15º angle.
Dewar Condenser, Micro Joints: 14/20 Inside Depth: 90mm Inside Diameter: 31mm Side joint is at 90 degree angle.
Hickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
Air Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.
For use with gas inlet tubes or plain stem thermometers. Supplied with one holed rubber adapter.
With Vigreux Indentations, used with 25mm immersion thermometer, and D27 distillation receiver. The SYNTHWARE Microscale Vigreux Distilling Heads are designed for precise distillation in microscale experiments. Their design incorporates multiple indentations to enhance separation efficiency during...
SYNTHWARE modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary...
With 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied through...
Synthware distillation adapter with Kjeldahl trap. With two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is approximately 200mm.
SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.
Crafted with precision by Kemtech America, this SYNTHWARE Adapter is designed to connect laboratory glassware with a #15 O-ring joint to a 10mm hose. Facilitating efficient and secure connections in your laboratory setup, this adapter is paramount for conducting a wide range of scientific...
Cap style stopper to be used with apparatus having a spherical ball joint. For clamp see CG-150. Enhance the accuracy and control of your lab's fluid and gas management with the SYNTHWARE High Vacuum Valves, Three-Way, PTFE-Protected. These valves are designed to direct the flow of gases or fluids...