DWK Life Sciences (Kimble)

Calibrated "to dispense" contents at 20°C Meets specifications of the Dominion of Canada for dairy glassware 9 mL pipet with ±0.05 mL tolerance

Vials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures attached Closures with PTFE-faced / white rubber liners or white rubber liners Vials packaged in corrugated trays with partitions

With Caps with White Rubber Liners Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type-III Soda Lime Glass

Non-pyrogenic Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated To Deliver (TD) to the tip Provided with “negative” graduations to increase the versatility of the pipet 72105 series is packaged in color-coded paper/plastic individual wrap and...

With Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95 mm (uses 25...

Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.

Jacketed CHROMAFLEX® columns are provided with an acrylic water jacket to provide thermal control of temperature-sensitive chromatographic separations.  The acrylic jacket also acts as a safety shield.  Threaded Recommended sterilization is with ethylene oxide, 2N NaOH or 100% ethanol...

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use....

Solvent bottle adapter Economy three-hole cap Inlet/sparge filter Safety system 3 combines a three-hole cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45 mobile phase...

Single-neck flask with a Standard Taper outer joint at top Heavy wall Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Side neck allows addition of filtered solvent without removing delivery cap.

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. The Baume scale originally was used in industrial...

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use....

KIMAX® cylinder with a durable blue ceramic enamel scale "TC" appears on each cylinder and indicates the cylinder is calibrated to contain A Standard Taper glass stopper is supplied Replacement stopper is 850100 Designed from ASTM Specification E1272, Style II, Class B...

Providing excellent containment and security for various laboratory containers, the '28150R-3 SNAP CAP NO 3 CS 6' is an essential asset for any scientific setting. Designed for easy application and removal, these caps ensure the integrity of the samples or substances within, preventing any unwanted...

The DWK Life Sciences (Kimble) Funnel Filter Buchner Fritted Coarse offers an advanced solution for laboratory filtration needs. Its 2000ml capacity accommodates larger volumes, optimizing efficiency in your lab procedures. Featuring a fritted glass disc, this Buchner funnel effectively separates...

Disposable, plugged, polystyrene pipet with uniform pulled tip. Calibrated for the measurement of undiluted and diluted milk, as prescribed in “Standard Methods for Analysis of Dairy Products,” American Public Health Association. Polystyrene milk pipet has a uniform pulled tip Capacity :...

Calibrated “to deliver” White scale Safety bumper Grade A cylinder features reverse metric scale and bumper. The “TD” (to deliver) appears on each cylinder and indicates it is calibrated to pour (dispense) and that the cylinder may be used repeatedly without drying.

Top Stoppers for Incubation Flasks. Rubber stoppers for flask top and sidearm provide a secure double seal Top stopper has off-center hole for insertion of center well Fits both 10 and 25 mL flasks

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes have...

Made from KIMAX KG-33 glass tubing Round bottom and slightly constricted neck with Standard Taper solid ground glass stoppers Tubes have a sand-blasted spot for marking 100 x 13 mm size test tubes include No. 9 Standard Taper stopper; 150 x 16 and 150 x 19, No. 13; 175 x 22 and 200 x 25, No. 19....

Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Narrow mouth design Type III soda-lime glass Five capacities: 1, 2, 4, 8 and 16 ounces