DWK Life Sciences (Kimble)

KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.

Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane. With an internal, coil-type cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors at the top for...

Durable white ceramic enameled scale Side filling tube has separate Teflon stopcock to control liquid; tube is 5/16 inch o.d. Calibrated to the accuracy requirements found in ASTM specification E 694 Kimax precision bore buret has a side filling tube with a separate stopcock to control liquid within...

Borosilicate, with spout and hexagonal base Single graduations, with zero at bottom; calibrated "to deliver" The 10 mL size has flared top to facilitate filling Sizes 25 to 2,000 mL include Safe-Guard ® plastic bumpers Designed from ASTM Specification E 1272, Style 1, Class B...

Complete with nut, O-ring, washer For replacement in glassware originally supplied with Teflon straight bore plugs

Used in the determination of carbon residue in petroleum products. ASTM D524.

Name 33 Expansion Vials with Black Polypropylene Caps and PTFE-faced Silicone Septa Capacity (mL) 40 Capacity (drams) 10 OD (mm) 28 Height (mm) 98 GPI Finish 24-400 Case Qty 72   ·          Clear glass screw thread sample vial ·...

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements Manufactured from 51...

The 90 mm filtration apparatus with replaceable fritted glass support is recommended for large volume filtration analysis of corrosive liquids or samples with high particulate loads. The glass support disc can be replaced if it becomes clogged or if sample-to-sample contamination is a concern Like...

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. The ethanol hydrometer has dual graduations in 0-100 %...

This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters....

Inserts are ideal for limited and micro volume applications. Options are available for both standard and wide opening 12x32 autosampler type vials. Clear borosilicate glass 60850 series has a conical point design, with polymer springs attached; residual volume 1mL 60855 series has a flat bottom...

Cylindrical funnels have a pressure equalizing line, a PTFE stopcock, and a lower drip tip Graduations to the stopcock are numbered both up and down Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Permanently marked with an individual serial number Supplied with a Certificate of Graduation Accuracy Buret is self-zeroing style Designed from ASTM E 287, Class A requirements Filling tube and overflow tube at the top of the buret accept 1/4” i.d. flexible tubing. Filling is through...

Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 24/40 and larger are hollow Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KIMAX bottle used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and...

Clear glass sample vials Closed-top white urea caps with PTFE-faced white rubber liners, attached Packaged in corrugated trays with partitions Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Crafted from robust polypropylene and lined with a blend of PTFE and silicone, this Closure offers both durability and chemical resistance. It's designed to ensure a secure seal, thereby safeguarding the integrity of the container's contents and preventing any contamination. Suitable for multiple...

Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Wide mouth design allows for efficient addition and removal of contents Type III soda-lime glass