Corning

Top edge is grounded flat within 0.25 mm to permit seal with flat cover Of PYREX borosilicate glass Without covers. Capacity and dimensions (L x W x D, mm) are given in listings.

Breathable Sealing Tape provides for adequate gas exchange while maintaining a sterile barrier. Breathable sealing tape fits all 96- and 384-well microplates and polypropylene blocks.

Low IgG (or "IgG Stripped") Fetal Bovine Serum is useful in IgG antibody production, in the propagation of organisms that are normally hindered by the presence of IgGs, and any project in which downstream results would be hindered by exogenous IgGs. Uses: Commercial antibody production,...

These Drying Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

This 1L PYREX® extractor body has a 45/50 Standard Taper outer top joint, a middle 35/25 Spherical Joint ball joint and a bottom 18/9 Spherical Joint socket joint. It is a component of the modular Continuous Heavier than Water Liquid/Liquid Extractor (Nos. 3922-M and 3924-M) and...

Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.

The Corning® top plate assembly is rated at 100 V and ideal for use with laboratory stirrer. The Corning Top Plate Assembly is a crucial component designed for seamless integration into laboratory equipment. Crafted with precision, this assembly ensures optimal performance and durability in...

This 47mm fritted all-glass support base with tubulation is designed for assembly with either the 300 mL graduated glass funnel Cat. No. 33971-300 or 1000 mL graduated glass funnel Cat. No. 33971-1L. Disclaimer: This product is not intended to mitigate the presence of microorganisms on surfaces or...

Corning CoolRack thermo-conductive tube modules eliminate variability which originates from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. Place the CoolRack module directly onto a temperature source between -196°C to >100°C and it will...

Standard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube are equipped with...

10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Membrane must be stained for cell visibility Sterilized by gamma radiation Transwell cell culture inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and...

Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

Stripwell™ Low Volume Microplates are designed with one-half the well area of a “regular” 8-well strip, providing a much greater surface to volume ratio.Low volume wells have recommended working volume of 50 to 125µLDesigned for in vitro diagnostic assaysFlat bottom strips...

Sterile Flask of optically clear polystyrene, tissue culture treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas exchange over...

Transparent, permitting use on colored background, with shallow, concave wells 9 well plate is 85 x 100 mm; wells are 22 mm o.d. x 7 mm deep

Corning® 96 Well Clear Round Bottom Polypropylene Not Treated Microplates feature uniform skirt heights for greater robotic gripping surface.  Solvent resistant polypropylene provides compatibility with many common organic solvents (e.g., DMSO, ethanol, methanol)Sterile and certified DNase-...

Corning extracellular matrices (ECMs) enable researchers to mimic in vivo environments for 2D and 3D cell culture applications.

PYREX® Standard Taper Enlarging (5732E35 to E50) With outer Standard Taper joint at top and smaller inner Standard Taper joint at bottom 5732E35 adapter is 100 mm long; 5732E47 and E50 are 105 mm long Listings give top joint size to bottom joint size PYREX® Reducing (573D34 to E49) With outer...

Sterile Disposable Anti-tip skirt available for added security Designed for maximum growth of anchorage dependent cells. Canted neck for easy access to growth surface. A choice of phenolic style caps, plug seal caps and vented caps for sterile gas exchange. The 75 cm 2 canted neck tissue culture...

Bottles are manufactured from virgin polystyrene, caps from high density polyethyleneBoth resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachmentOne piece seamless construction with printed graduationsPrinted lot numbers to aid in product...

Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescent and enabling readings down to 340nmDesigned to reduce well-to-well crosstalk during fluorescent assaysNonbinding (NBS™) surface is a Corning proprietary treatment technology used on...

Safe and easy chamber removal for microscopic analysis Innovative sealing design Falcon CultureSlides for in situ analysis Falcon CultureSlides allow you to culture cells and then analyze them on a glass microscope slide. Cells are grown in a plastic chamber affixed to a specially prepared glass...

Flat, clear dishes will withstand repeated sterilization (wet or dry) The edges are beaded to provide greater mechanical strength; the bead also provides a means to equally space the side walls of the bottom and cover, thereby reducing the capillary action of condensed moisture on the sides Dishes...

Tip format: 384 tip     Tip volume range: 25 μL to 50 μL      Tip material: Clear polypropylene, RNase-/DNase-/human gDNA-free, Nonpyrogenic      Available options:      With or without aerosol-resistant filters Nonsterile or sterile...