Boekel Products

Boekel Products

Products (65)

Compare Tool

Select up to 3 products

  • Cement Autoclave

    The Cement Autoclave provides an accelerated means of estimating delayed expansion of Portland cement caused by hydration of CaO, MgO, or both in accordance with procedures described in ASTM C151. In this operation, changes in length of test bars of cement are measured after being exposed to...

  • Big and Little Shot Hybridization Oven Accessories

    Multi-Tube Carousels For using a variety of tube sizes in the Little Shot and Big Shot Ovens. See the Specifications for complete details. Microplate Carousels Holds standard microplates or deep well plates. Plates must be sealed before used in a carousel. Little Shot Model holds 4 plates and the...

  • Variable Speed Mini Orbitron™ Mixer

    Provides gentle, continuous mixing of specimens Extremely quiet Reverse action the touch of the wrist Low profile and small footprint minimizes bench space Accommodates a variety of blood tubes, centrifuge tubes, glass vials, or plates Includes two white mats, one dimpled and one flat Rubber mats...

  • Rocker ll™

    Applications Gel staining and destaining Northern, Southern and Western blots Mixing test tubes Rocking agglutination card Features Adjustable tilt angle 0° to 20° Adjustable speed of 3-25 RPM Load capacity: 2.7 kg (6 lbs.) Temperature range 4°C to 40°C Accepts a wide variety of flasks and plates...

  • Orbitron I Compact 3-D Rotators

    Applications Mixing blood samples Coupling affinity chromatography media Mixing tubes of different diameters simultaneously Mixing a broad spectrum of test tubes Features Pad is removable for easy cleaning and test tube transport Low voltage power is supplied by a wall mount transformer Gentle, low...

  • Economical Digital Incubator

    Digital temperature display with a 0.1°C resolution; maximum temperature 60°C Rugged metal door and magnetic door latch Excellent temperature stability and uniformity Smaller than similar capacity incubators, making it ideal for limited spaces Additional shelves available Supplied with...

  • Blood Collection Mixer

    For the mobile donor centers, this Blood Collection Mixer includes a soft carry bag to pack up the unit and go. Soft Carry Case can be purchased separately for those who need to pack up the mixer for mobile bus donation. Charger allows the user to charge up to four additional batteries. Long-Life Ni...

  • Orbitron Rotators

    Three models to satisfy all your needs Operates in temperatures from 4 to 55°C 12” square platform Removable mat for easy cleaning and tube support Accepts a wide variety of tubes simultaneously without the need for racks or clamps Thin power cord allows use in cold room or incubator...

  • Hybridization Bottle

    The Boekel hybridization bottle measuring 35 mm x 300 mm, is suitable for use in hybridization ovens. It is mainly used during nucleic acid and protein blotting procedures. It is made of sturdy and high quality glass material.

  • Mini Tube Rotator

    Variable Speed: 4-18 rpm LCD display Includes 260751 Carousel for thirty-six 1.5/2.0ml tubes Provides complete 360° Rotation An adustable 0-90° Mixing Angle Small footprint for your bench — we know you need all the space you can get! Interchangeable carousels for all common laboratory...

  • Economy Analog Incubators

    Manufactured in the US from 22 Ga steel Powder-coated exterior for scratch and stain resistance Easy-to-clean aluminum interior. Expanded temperature range of ambient +10 to 90°C. Blower fan improves the heating and stability of the desired temperature See-thru door The Boekel CCC Analog Incubators...

  • Electric Pipet Dryers

    Made of 302 stainless steel Typical load, 200 pipets, 7 mm o.d.; dries in approximately 1 1/2 to 2 hours Operating temperature at center of chamber is approximately 110°C Efficient drying is accomplished by chimney convection from a 275W heater in base, promoted by peripherally slotted conical...

  • Stainless Steel Pipet Canisters

    Rectangular Pipet Can (7785B10 and 7785N25) Made of stainless steel Rectangular Pasteur Pipet Cans (7785R10 and 7785R20) Made of stainless steel Cross section x length indicated in listings.

  • Accessory Shelf, 11  1/4" x 10  1/4"

    Accessory Shelf for 133000/-2 and 132000/-2 Incubator Models

  • Tight Temperature Tolerance Incubator

    Forced convection incubator for temperature sensitive applications. Specifically designed for maximum temperature stability and uniformity the TTT incubator or “Tight Temperature Tolerance” incubator uses mechanical convection and an optimized configuration. Ideal for waste water/water...

  • Microprocessor Controlled Orbital Shaker

    Small foot print, reciprocating/orbital shaker Smooth horizontal orbital motion for mixing in bottles, flasks, and beakers Soft start and noise-free operation Platform not included. See interchangeable platforms listed below Power Pack is CSA, UL, CE approved Can be used in an incubator 4°C to 40°C...

  • Digital Incubators with Locks

    Ideal for school laboratories and hospitals with its space-saving footprint. This model features a solid locking door and LCD temperature display which can be easily seen throughout the laboratory.

  • Shaker II-Incubator

    Will hold up to four 200 x 200 mm blots on individual removable trays Trays gently agitated so that blots are not continuously sitting in solution, minimizing incidental background and providing greater sensitivity Variable shaking, adjusted from 8 to 25 strokes/minute Provides variable stroke...

  • Zahn Cup Viscometers

    Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil Compact and easy to use Rapid results Inexpensive Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less. Five cups are available differing only in the size of...

  • Microplate Shakers

    Reliable, regulated shaking for two or four microplates Simple screw attachments allow quick and easy fitting of any standard depth 96 or 384 well plates, holding the plates securely in place Standard platform for two microplates, included 2-year manufacturer's warranty Power Pac is UL, CSA and CE...

  • Lab Jacks®

    All stainless steel screw mechanism and anodized aluminum top and bottom plates.

  • Accessories for General Purpose Water Baths "Hot Tubs"

    Stainless Steel Gabled Covers Gabled Covers direct condensed water to edge and back into the tank. **NOTE: Stainless steel gabled covers are required for use when the water bath is placed in boiling mode. Polypropylene Spheres Polypropylene spheres are an alternative to a lid; they minimize...

  • Blocks For Dry Bath Incubators

    For dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional blocks.

  • Tap Dancer Mini Tube Vortexer

    Compact, with low profile and small footprint Pressure sensitive cup Continuous or touch operation Rubber suction pads prevent walking, absorb vibration Low voltage supply for safe cold room use 2-year manufacturer's warranty Power Pac is UL, CSA and CE approved

Compare Tool

Select up to 3 products