Agilent Technologies Lab Supplies

The Agilent Technologies EI350 repeller assembly is suitable for use with Agilent 5977 MSD gas chromatography/mass spectrometry instruments. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Several reciprocating vessel screens are available for the Agilent BIO-DIS reciprocating cylinder apparatus, which is ideal for automatic dissolution testing of dosage forms that require different types of media. This product is only available to U.S. Domestic Customers. For research use only, not...

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives...

Brass body, dual stainless steel diaphragms These regulators and Agilent’s broad spectrum of in-line filters, combination traps, and gas purification systems are an excellent combination to plumb your systems. Agilent Technologies products are intended for sale/shipment within the US only....

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers disintegration baskets for the 100 automated disintegration apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

eXtra Dense Bonding (XDB) is key to the exceptional performance of ZORBAX Eclipse XDB columns at intermediate pH. This dense bonding is accomplished by adding an extra-dense monolayer of C18, C8, phenyl, or CN-silane to the ultra-pure, fully-hydroxylated, ZORBAX Rx-silica surface. The packing is...

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying...

Analyte: 1,4-Dichlorobenzene, CAS Number: 106-46-7; InChl: OCJBOOLMMGQPQU-UHFFFAOYSA-N; Analyte: Di-n-octyl phthalate, CAS Number: 117-84-0; Analyte: Hexachlorobutadiene, CAS Number: 87-68-3; Analyte: N-Nitrosodiphenylamine, CAS Number: 86-30-6; Analyte: Fluoranthene, CAS Number: 206-44-0; Analyte:...

Agilent J&W VF-5ms is an inert 5% phenylmethyl polysiloxane column that delivers increased sensitivity, accuracy, and instrument uptime. The column has the lowest guaranteed bleed specification of 1 pA at 325 °C (for 30 m, 0.25 mm, 0.25 µm). This column has slightly higher polarity than VF-1ms,...

Analyte: Acetophenone, CAS Number: 98-86-2; Analyte: Bis(2-chloroethoxy)methane, CAS Number: 111-91-1; Analyte: Benzoic acid, CAS Number: 65-85-0; Analyte: 4-Chloro-3-methylphenol, CAS Number: 59-50-7; Analyte: 4-Chloroaniline, CAS Number: 106-47-8; Analyte: 2,6-Dichlorophenol, CAS Number: 87-65-0;...

The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond,...

The Agilent Technologies iridium 100 mL single element standard with concentration levels of 1000 ug/mL contains no contaminating elements and is made from pure materials. The concentration levels of this standard helps in diluting the working solutions and is ideal to be utilized as a stock blend...

The Agilent Technologies PCI GPIB-IEEE (National Instruments) interface card is suitable for use with PCs and workstations with PCI expansion slots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent J&W DB-1 is nonpolar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, crosslinked and solvent rinsable, and is equivalent to USP phase G2. This product is only...

Analyte: Dodemorph, CAS Number: 1593-77-7.

The Agilent 500 mL single element AA standard is intended for use as a certified reference material or calibration standard for atomic absorption. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Bond Elut C18 EWP is based on standard particle size silica but with 500 Å pores to allow more efficient extraction of large molecules (15,000 mol wt), which are typically excluded from standard porosity silica phases. This product is only available to U.S. Domestic Customers. For research use only,...

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W...

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)...

The Agilent Technologies sodium 100 mL atomic absorption calibration standard with concentration levels of 1000 ug/mL is a single element standard that helps in ensuring the stability and performance of atomic absorption analyses. Application: For AA and MP-AES This product is only available to U.S....

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.