Select up to 3 products
Analyte: Allyl chloride, CAS Number: 107-05-1; Analyte: Acrylonitrile, CAS Number: 107-13-1; Analyte: Ethyl methacrylate, CAS Number: 97-63-2; Analyte: Methyl methacrylate, CAS Number: 80-62-6; Analyte: Methyl acrylate, CAS Number: 96-33-3; Analyte: Nitrobenzene, CAS Number: 98-95-3; Analyte:...
The Agilent Technologies rotating cylinder height gauge is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in...
Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
Analyte: 1,2-Dibromo-3-chloropropane, CAS Number: 96-12-8; Analyte: 1,2-Dibromoethane, CAS Number: 106-93-4; Analyte: 1,2,3-Trichloropropane, CAS Number: 96-18-4 ; . EPA, Method: 504.1.
Analyte: Aroclor 1254 (PCB 1254), CAS Number: 11097-69-1. EPA, Method: 505; EPA, Method: 608.
The Agilent Technologies phosphorus organometallic standard with concentration levels of 5000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and...
Captiva EMR-Lipid provides highly selective and efficient lipid/matrix removal without unwanted analyte loss. The novel EMR-Lipid technology removes lipids based on a combination of size exclusion and hydrophobic interaction. Effective lipid removal assures minimal ion suppression of target...
Bond Elut SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...
Agilent J&W Select FAME is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. This low-bleed, bonded column has an isothermal maximum operation temperature of 275 °C and a programmed temperature of 290 °C-a dramatic improvement of 50 °C compared to nonbonded columns. Even...
Agilent J&W CP-Silica PLOT brings the benefits of capillary PLOT columns-higher efficiency and faster analysis time-to many applications that previously could only be done using packed columns. It is ideal for COS in ethylene, freons/CFCs, hydrocarbons, propylene, and sulfur gases. The column offers...
The InfinityLab quick turn LC fitting has a durable stainless steel construction and the quick-turn fitting provides a leak-tight seal. Application: For HPLC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
Analyte: Beta-BHC (beta-HCH), CAS Number: 319-85-7; InChl: JLYXXMFPNIAWKQ-UHFFFAOYSA-N.
Analyte: 2,4,6-Tribromophenol, CAS Number: 118-79-6; Analyte: 2-Chlorophenol-d4, CAS Number: 93951-73-6; Analyte: Phenol-d5, CAS Number: 4165-62-2; Analyte: 2-Fluorophenol, CAS Number: 367-12-4 . EPA, Method: CLP SVOA.
The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond,...
Agilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same...
Agilent 2-AB (formerly ProZyme) labeled N-glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. 2-AB standards come pre-labeled with 2-AB, ready to reconstitute and inject. The sialic acid linkage of the sialylated glycans within the 2-AB library are a(2, 6)...
Agilent J&W DB-5 is nonpolar and low bleed, and is available in a range of column dimensions. DB-5 is also bonded, crosslinked, and solvent-rinsable, and has a high temperature limit. It is equivalent to USP phase G27. The DB-5 column is tested with the tightest industry QC specifications for column...
The Agilent Technologies accessory is used in HPLC (high-performance liquid chromatography) system, which is mainly used in biochemistry and analytical chemistry experiments to separate individual components from the mixture. This accessory assures smooth and reliable functioning of the HPLC system....
PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives...
Agilent J&W DB-1 is nonpolar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, crosslinked and solvent rinsable, and is equivalent to USP phase G2. Application: For LTM...
These hydrophilic polymers are suitable for both aqueous SEC and organic GPC using the majority of polar organic solvents. The polyethylene oxides (PEO) are available in high molecular weights, while the polyethylene glycols (PEG) cover the lower molecular weight range. The two types are chemically...