Agilent Technologies Lab Supplies

Agilent Technologies Lab Supplies

Products (15139)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Intuvo Tool Compression Bolt

    Agilent Technologies

    The Agilent Technologies intuvo tool compression bolt is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Surrogate Fortification Standard 500 ug/mL acetone 1X1ML

    Analyte: Triphenyl phosphate, CAS Number: 115-86-6; InChl: XZZNDPSIHUTMOC-UHFFFAOYSA-N; Analyte: Perylene-d12, CAS Number: 1520-96-3; InChl: CSHWQDPOILHKBI-AQZSQYOVSA-N ; Analyte: Pyrene-d10, CAS Number: 1718-52-1; Analyte: 1,3-Dimethyl-2-nitrobenzene, CAS Number: 81-20-9; InChl:...

  • Plot Gas Chromatography Column

    Agilent Technologies

    Agilent J&W PoraBOND Q is the long-term solution for analyzing volatile solvents and hydrocarbons. It is the most stable column of its kind and withstands repeated water injections. The porous polymer is very pure and has virtually no catalytic activity. This means that PoraBOND Q can be used up to...

  • GC Ultra Inert Column

    Agilent Technologies

    Agilent J&W DB-35ms Ultra Inert is a mid-polarity column for applications where different selectivity is needed for enhanced separations, including pesticide analysis and drugs of abuse testing. This column quantifies components at a lower level, with broader linearity and optimized separation,...

  • Non-Halogenated Volatiles Standard 100 ug/mL methanol 1X1ML

    Analyte: Benzene, CAS Number: 71-43-2; InChl: UHOVQNZJYSORNB-UHFFFAOYSA-N; Analyte: Ethylbenzene, CAS Number: 100-41-4; Analyte: Styrene, CAS Number: 100-42-5; Analyte: o-Xylene, CAS Number: 95-47-6; Analyte: m-Xylene, CAS Number: 108-38-3; Analyte: p-Xylene, CAS Number: 106-42-3; Analyte: Toluene,...

  • Application Specific Gas Chromatography Column

    Agilent J&W CP-Select 624 CB, a 6% cyanopropyl, 94% dimethylpolysiloxane phase, is a highly reproducible version of the popular 624 phase and has two to three times lower bleed than conventional columns (bleed specification for a 30 m, 0.53 mm, df = 3.00 µm is 9 pA). It is synthesized and fully...

  • Single Element Standard

    Agilent Technologies

    Agilent offers NIST traceable single element standards to quickly test elemental impurities in environmental, food, mining, chemical, and pharmaceutical markets. Single-element standards are useful in allowing flexibility in developing your own multi-element mixes or supplementing existing mixes....

  • DV Radial Window Tube

    Agilent Technologies

    The Agilent Technologies dual-view radial DV radial window tube made of quartz is suitable for Optima 2x00/7000/8000 instruments. Application: For Optima 2X00/7000/8000 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • GC Ultra Inert Column

    Agilent Technologies

    Agilent J&W DB-5ms Ultra Inert columns deliver industry-leading analytical performance in a range of chromatographic applications. DB-5ms Ultra Inert is low bleed and features excellent signal-to-noise ratio and symmetric peak shapes, enabling high performance for challenging active analytes such as...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W DB-5 is nonpolar and low bleed, and is available in a range of column dimensions. DB-5 is also bonded, crosslinked, and solvent-rinsable, and has a high temperature limit. It is equivalent to USP phase G27. The DB-5 column is tested with the tightest industry QC specifications for column...

  • GC Capillary Column

    Agilent Technologies

    J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and...

  • Phenols Standard 2000 ug/mL dichloromethane 1X1ML

    Analyte: 4-Chloro-3-methylphenol, CAS Number: 59-50-7; Analyte: 2-Chlorophenol, CAS Number: 95-57-8; Analyte: 2-Methyl-4,6-dinitrophenol, CAS Number: 534-52-1; Analyte: 2,4-Dimethylphenol, CAS Number: 105-67-9; Analyte: 2,4-Dinitrophenol, CAS Number: 51-28-5; Analyte: 2,4-Dichlorophenol, CAS Number:...

  • Electron Multiplier Assembly, 220 GCMS

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Nebulizer Assembly

    Agilent Technologies

    Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For AAnalyst...

  • PLRP-S Polymeric Reversed-Phase LC Column

    PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives...

  • EasiVial PEO Pre-Weighed Calibration Kit

    Calibration kits are available for both aqueous and organic GPC/SEC. A variety of well-characterized polymer standards is available, including PEG, PEO, polyacrylic acid, PMMA, polystyrene, dextran, and more. This product is only available to U.S. Domestic Customers. For research use only, not to be...

  • Torch Injector

    Agilent Technologies

    Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

  • Application Specific Gas Chromatography Column

    Agilent J&W CP-Wax 57 CB has unique selectivity especially suited for the analysis of alcohols in the brewing and wine/spirits industry. The high inertness of this column offers excellent peak shapes for these very polar compounds, ensuring high precision. The 0.15 mm id version offers a significant...

  • Blanking plug for neb. block, PEEK, 1/pk

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Intuvo Mid Column Backflush to D2 Chip

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Polymethylmethacrylate (PMMA) Individual Molecular Weight

    Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone, and ethyl acetate. They also work well with more polar organic eluents, for example...

  • Inlet Liner

    Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal...

  • 2,3,3',5,5'-Pentachlorobiphenyl Standard (BZ#111) 100 ug/mL isooctane (2,2,4-trimethylpentane) 1X2ML

    Analyte: 2,3,3',5,5'-Pentachlorobiphenyl (BZ 111), CAS Number: 39635-32-0.

  • < Previous
  • > Next

Compare Tool

Select up to 3 products