3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

Designed to gather small amounts of sample material, especially in hard to reach containers. Long handle reaches into jars, bottles and other confined areas Minimizes the potential of personal contact with sampled material Sterile, FDA grade polystyrene safe for food, drug and…

Uses capillary-type thermal technology to directly measure mass flow of gases. No temperature, pressure or square root corrections are required. Comes with an LCD display and has linear 0 to 5 and 4 to20 mA output. Uses an internal electromagnetic proportional valve to control the mass flow rate.

Ideal for taking samples from low and medium viscosity liquids, the Liquid Master is available in a range of lengths and diameters to give a range of sample volumes. Product Contact Material Available in: 316L Stainless Steel, Food Grade PTFE/FEP, Polypropylene. Available in a large variety…

For taking a large volume, cross sectional sample from a container. This all layer sampler has a robust all stainless steel construction and is suitable for sampling free flowing powders, granules and even slightly cohesive powders. Made from high quality 316L stainless steel. Cross…

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with…

All-layer sampler, with open inner tube, no separate chambers, and large sampling volume. For all-layer samples through all the layers of the sample. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be…

The ChemoSampler was developed for sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can…

The carbon fiber reinforced probes are designed to be mounted to a Z-drive with two probe clamps and without a guide plate. The carbon fiber probes can also be used with the prior version Z-drives, but the guide plate must be used. Most CETAC autosamplers built since January 2009 are equipped with…

This holder accommodates test tubes from 11 to 17 mm diameter.

Sample liquids from drums Liquid-tight Teflon® seal reduces spills Teflon seal design allows sampling to within 1/2” of drum bottom. Once sample has been collected, lower and press lightly on inner tube, which positively seats Teflon seal, locking sample column into place. Dimensions:…

Ergonomic handle design -- curved at bottom for better grip Double bagged for extra protection from contamination Ideal for use in multi-zone cleanrooms FDA-grade material; safe for food, drug, and cosmetic contact Gamma irradiated sterile These sterile polystyrene (PS) sampling scoops…

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to the sampling container. Easy cleaning for flawless sampling. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm. …

TFM Pressure Seal for High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 16 Position Microwave Sample Preparation Systems. Made of TFM Quantity: set of 5

The Long Handled PharmaScoop from Sampling Systems is made from 316L Stainless Steel, with a crevice free construction allowing this scoop to be ideal for hygienic applications. The long ergonomic long handle allows the operators hands to be kept well clear of the product. Extra long handle…

This sample scoop has been developed in order to meet the high requirements of the pharmaceutical industry, such as those contained in the FDA regulations. Like all samplers for the pharmaceutical industry, they are made of stainless steel AISI 316 without edges, crevices or undercuts in which…

Our robust Cohesive Powder Sampler is able to take a sample from a known point within the product. A scraper is fully welded to the outside of the pocket. The cohesive sampler is available with three standard tip sizes. Key Features Manufactured in 316L Stainless Steel Available…

Sampler for pourable bulk goods up to approx. 1 cm in diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Also for coarse-grained bulk goods Made of stainless steel AISI 316L (1.4404) Special geometry of the tip

The range of Stainless Containers from Sampling Systems are ideal for use with powders and liquids. The high-quality crevice free finish makes these containers ideal for demanding applications. Multi-purpose containers Robust construction Crevice free interior for easy cleaning …

DISK-TITAN RUPTURE 75ML (25)

The SteriWare™ Disposable Powder Funnel is ideal for transferring powders. Available both sterile & non-sterile. Made from chemically resistant, food grade HDPE. Key Features: Moulded & packed in a Class 100,000 Cleanroom Individually bagged Made from FDA, EC…

Two 500 mL polypropylene bottles are included in the 500 mL Polypropylene Bottle Kit (N8150402).

Neutralizing buffer swabs used in the monitoring of surfaces for total bacterial count and collection of surface contamination from flat or convoluted surfaces prior to transport to a laboratory for culture and enumeration. Neutralizing buffer inactivates the bactericidal and bacteriostatic…

These Heavy Duty Stainless Buckets are from from heavy gauage 316L Stainless Steel, so are very durable ideal for a range of applications. Crevice free interior Made from 316L Stainless Steel Swing handle Flat base Not graduated Lids available (sold seperately)

PTFE Digestion Tube 50 ml (pk/6)

Ideal for both production work and laboratory use, Pharma Scoops are used by pharmaceutical, food, cosmetic, and chemical companies. Bright red color reduces chance of scoop being left behind in a sample; can serve as code to avoid cross contamination; can provide contrasting background for…

These sterile scoops are used by pharmaceutical, food, cosmetic and chemical companies for general production or laboratory work. Handle bump acts as thumb rest to help keep the hand away from the scoop; reduces contamination risks Flat bottom allows for use as a weigh boat Approximate…

Besides the individually detachable close-it and close-it food & pharma closure labels, our repeatedly tested and proven control seal is now also available on a continuous roller. This helps you discover whether you require only a small piece, for example for closing a small hole, or for…

The LaboPlast® Bio disposable spatula made of green PE is produced in our clean room of class 7 (10,000) and individually wrapped in bio-PE film for disposable use. Green PE bio-plastic has all the suitable properties of conventional polyethylene and can be completely recycled but is…

The handy set, which comes complete with carrying case, combines the LiquiSampler and the ViscoSampler with practical accessories. Models in PP or PTFE/ FEP. QualiSampler set consisting of: LiquiSampler, 100 cm ViscoSampler, 100 cm Case, five bottles, cleaning brush