Cabinets and Accessories
-
Solid 1 Door Wall Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. Solid door wall cabinet…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with full extension soft close slides, stainless steel wire pulls, and full overlay construction. Standing height BC30 4-drawer…
-
Sliding Glass Door Wall Cabinet
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with sliding framed glass doors, inset pulls, and inset construction.
-
Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons of…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet…
-
Set includes four leveling glides.
-
End Supports
INSTOCK LabsPanel End Supports are to be used in place of a cabinet at one end of a cabinet run to support drawer frames or apron rails. Can be used to support the intersection of two aprons or rails.
-
Base Stands
LabconcoAdjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…
-
Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…
-
Knee Space Panels
INSTOCK LabsKnee Space Panels for Drawer Aprons are to be used with Drawer Aprons. Knee Space Panels for Drawer Aprons are to be used with Apron Rails. The knee space closes off the casework to the wall to create a clear sitting under the work surface.
-
Wall Cabinets
INSTOCK LabsWall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.
-
Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…
-
Sitting Height Base Cabinets with 3 Drawers
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Glove Box Base Stands
LabconcoAdjustable Height Mobile Base Stands and Adjustable Height Stationary Base Stands have permanently-mounted black laminate work surfaces and epoxy-coated steel frames. These base stands are designed to support Protector Glove Boxes and Precise Glove Boxes and may also function as tables for general…
-
The CPU holder attaches via a bracket mount and swivels side to side. The heavy duty holder is adjusted 12" to 20" high and 3.5" to 9" depth.
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet…
-
Apron Rails
INSTOCK LabsApron Rails are used to span a knee space area between two cabinets. Attachment hardware is included. Can be cut to fit in the field.
-
Standing Height Base Cabinets with 4 Drawers
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
27 1/4" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Standing Height Base Cabinets with 2 doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…
-
Steel Box Apron 22"D
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with overlay front applique at 22"D.
-
Mixing Faucet
INSTOCK LabsMixing Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
27 1/4" Tall Mobile Cabinets, Right Hinged
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Modular Workstation B1 includes: (1) 18" D00 Standing Height 3-Drawer Base Cabinet (1) 18" C03 Standing Height Single Door Base Cabinet (2) 36" E40 Standing Height 1-Drawer / 2-Door Base Cabinet (1) 36" A00 Steel Box Apron 22"D with Full Overlay Applique (1) 36"…
-
Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC41 standing height base cabinet…
-
Modular Workstation G1 includes: (2) 72" Lab Bench Full Height (84) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Full Height Worktop - Epoxy Resin, Beveled Edge, Black (2) 72" Lab Bench Upper Shelf 15"D (2) 72" Lab Bench Lower Shelf 15"D (2) 72"…
-
Modular Workstation C1 includes: (1) 24" D30 Standing Height 4-Drawer Base Cabinet (1) 36" E40 Standing Height 1-Drawer / 2-Door Base Cabinet (1) 48" E41 Standing Height 2-Drawer / 2-Door Base Cabinet (1) 36" A00 Steel Box Apron 22"D with Full Overlay Applique (1)…
-
Standing Height Sink Cabinets with 2 Doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Sitting Height Base Cabinet, Left Hinged
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Chase Support Assemblies
INSTOCK LabsThese Chase Support Assemblies are adjustable height, floor mounted, support assemblies for work surfaces as well as drain line and plumbing chase for piping.