Vent Cap Tubes

Compare Tool

Select up to 3 products

Vent Cap Tubes
1 - 31 of 31
Sort
View
Show
  • 15 & 50mL Bio-Reaction Tubes

    Celltreat Scientific

    …Bio-reaction tubes consist of centrifuge tubes with a 0.22μm hydrophobic membrane in the vent cap. These tubes are perfect for biological reaction experiments that require aseptic conditions with free gas exchange. Save money with the ability to culture and centrifuge in one tube

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    …have a polypropylene housing, the circumference of which is sealed by a security ring, fittings to accommodate 1/8” tubing and an air vent on the inlet with luer lock cap to enable priming. The in-line filters work on the principle of “bubble point” - the point of pressure at…

  • Disposable Aseptic Transfer Caps for Plastic Erlenmeyer Flasks

    Corning

    …transfer caps can also be used on Corning 850 and 1700cm 2 plastic disposable roller bottles. Venting port ends in a 50mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting Liquid transfer port has an internal end with a rigid polypropylene dip tube angled to…

  • Filling/Venting Closure

    Thermo Scientific Nalgene

    cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters. Includes polypropylene cap, TPE gasket, three ports, TPE port caps and silicone tubing.

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    …Solvent IFD’s all-polypropylene housing is sealed by a security ring. The filter includes fittings to accommodate 1/16”–1/8” tubing and an air vent on the inlet with luer lock cap to enable priming. The in-line filter works on the principle of "bubble point" – the point of pressure at which gases…

  • Two-Position Caps for Culture Tubes

    Evergreen Scientific

    Overfitting caps for use with sterile culture tubes have two positions: loose for aerobic culturing and tight for a-aerobic cultureing and leakproof sealing.

  • Corning® 50mL Mini Bioreactor

    Corning

    Features and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …function Whatman Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate 1/16”-1/8” tubing, and an air vent on the inlet with luer lock cap to enable priming. An in-line filter works on the principle of "bubble point" – the point of pressure at which gases will…

  • Stainless Steel Port Assemblies

    Bellco Glass

    Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone gasket.

  • Corning Media Storage Caps

    Corning

    Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps

  • 14mL Round-Bottom Tubes

    Thermo Scientific Nunc

    Perform critical cellular applications with Thermo Scientific™ Nunc™ 14mL Round-Bottom Tubes. Features: Optimized gas exchange with dual position vent/close cap Off-gas volatile organic compounds easily with breathable packaging Certificates of conformity available…

  • Ultimate Digestion Cups

    Environmental Express

    …Easier to Fill - graduation lines have been added to both sides of the cup, and interfering vent lines are gone forever! Cap Options - a new linerless cap option to go with our polyethylene-faced lined cap Tighter Seal - a redesigned screw thread profile tightens the seal and engages our…

  • Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    For retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.

  • Filling / Venting Closure With 1/4 Inch Fittings PP 53B

    Thermo Scientific Nalgene

    … Leakproof systems for secure, aseptic handling of high valued products compared to pouring Includes premounted tubing lengths inside the container to support the integration to most Nalgene bottles and carboys Includes: Nalgene 50 platinum-cured silicone tubing and TPE vent port cap.

  • 5L Erlenmeyer Flasks with Aseptic Transfer Caps

    Corning

    …aseptic transfer caps protect against adventitious contamination during liquid transfer. The transfer caps have two ports: a port ending in a 0.2 μm filter and a port with chemically resistant, heat sealable flexible tubing ending in a male polycarbonate quick connect. The dip tube reaches all…

  • CELLSTAR® Cell Culture Tubes

    Greiner Bio-One

    CELLSTAR® Cell Culture Tubes are made of high-grade polystyrene and are available with screw cap, bayonet cap or two-position vent stopper.

  • Filling / Venting Closure With 1/4 Inch Fittings PP 83B

    Thermo Scientific Nalgene

    … Leakproof systems for secure, aseptic handling of high valued products compared to pouring Includes premounted tubing lengths inside the container to support the integration to most Nalgene bottles and carboys Includes: Nalgene 50 platinum-cured silicone tubing and TPE vent port cap.

  • HPLC Poly Manifold for Quick-Disconnect Safety Disposal Cans

    Justrite

    …(per manifold) from HPLC processes to be fed into a single intake fitting. Manifolds have six 1/4-28 ports and one 3/8" NPT port (all come with caps for unused ports) and either one quick disconnect in No. 316 stainless steel or polypropylene, or a No. 316 stainless steel stacker connector. The…

  • Caps

    TriForest

    Cap This cap is an ingenious combination of our TriForest septum Cap and vented DuoCAPs™. It provides an additional layer of protection to the standard septum caps. Port Cap Kit (3-Port and 4-Port) Given the multiple port needs of our customers, we have designed the port cap in…

  • Polystyrene CellSTACK® - 1 Chamber with Ultra Low Attachment Surface and Vent…

    Corning

    …emptying by pouring, pipetting or via tubing in a fully closed system Standard 33mm threaded caps have 0.2µm pore nonwettable membranes sealed directly to the caps to allow gas exchange while minimizing the risk of contamination Optional 33mm threaded caps are available with integrally…

  • ProCulture® Gas Venting Cap with 50mm 0.2µm PTFE Filter with Sanitary Fitting…

    Corning

    …headplates. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are…

  • VersaTube™ Container

    Starplex Scientific

    …patented tube with attached cap - simplifying digestion analysis and saving you money! This versatile disposal tube can also be used for other sample collection, storage and experimental purposes. Unique integrated cap and vial Ability to vent samples with the hinged cap; no watch…

  • Cell Factories

    Thermo Scientific Nunc

    …cell factory connector, caps, bacterial air vent, tubing and clamp. Tubing Connector, Elbow Type (9383X16) Polypropylene, L-shaped, with "O"-ring One end fits into top of channels on Nunc Cell Factories, opposite end serrated to take tubing 6- to 10-mm (1/4 to 3/8 inch)…

  • Thomas Glass Sprayer

    Thomas®

    … Conveniently located vent permits instantaneous control of spray Borosilicate glass tube has permanently attached, molded phenolic screw cap (size No. 24) with polyvinyl liner which fits commercial narrow mouth bottles Complete with spray tube, screw cap and 240 mL clear glass bottle…

  • UrineGARD* Urine Collection Container

    Samco

    …graduations and highly accurate scales Custom cap and mouth design helps prevent leakage Upright configuration for compact storage Custom spout allows for accurate pouring into test tubes, centrifuge tubes or aliquot bottles The Thermo Scientific* Samco UrineGUARD…

  • Specific Gravity Bottles, Pycnometers, Medium Length

    DWK Life Sciences (Kimble)

    Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of pigments…

  • Specific Gravity Bottle, Serialized Pycnometer, with Non-Mercury Filled…

    DWK Life Sciences (Kimble)

    …designed with a special, medium length standard taper 10/18 joint and are retested for accuracy within ±0.2°C. Cap for side tube is medium length standard taper 5/12 and has a small vent near the top. Body is conical for maximum stability and capacity is within 10 percent of nominal shown on the…

  • Fluid-Transfer Closure PP 70 mm

    Thermo Scientific Nalgene

    …and 250mL straight-sided jars with 70mm closures Top of closure has 2 external male vent ports allowing for external connection to a vacuum or pressure pump with 1/4in inner diameter flexible tubing Use for siphoning, evacuation, bleeding of fluid lines, collecting samples, and transferring…

  • Spinner Flask

    Corning

    …(Cat. No. 3561) Cap is made of high density polyethylene; autoclaving is not recommended The venting port ends in a 25mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the…

  • Reservoir, Solvent Netted, Plastic coated

    Ace Glass

    14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    …covers can be vented aseptically using a hydrophobic syringe filter(13JP050AN). Units with covers are supplied with gum rubber caps. FPM O-rings are available. Aseptic System with Receiver also includes a receiver cover and the 11mm OD hose adaptor accepts 3/8" tubing. Please Note:…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.