Tube Rack 20mm

…accommodate tubes, vials, serological tubes and reagent containers, these polyethylene racks both include 5 pins for drying tubes upside down. 12 wells rack has 20.6mm diameter (13/16") holes for 16 to 20mm tubes 17 wells rack has 14mm diameter (9/16") holes for 10-13mm tubes;…

…racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks …

…racks can be disassembled for easy storage when they are not in use. They are autoclavable. Options include: #TTRK-13: 90 Hole Rack for up to 13mm Tubes #TTRK-17: 44 Hole Rack for up to 17mm Tubes #TTRK-20: 21 Hole Rack for up to 20mm Tubes #TTRK-25: 21 Hole Rack for up to…

…RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates have hand holes for safe transport Length x width x hei: 254 x 111 x 89mm (10 x 4 3/8 x 3 1/2 ") Tube size: 13-16mm Places: 40

…at a glance Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Eight – 50mL or 30mm diameter tubes Twenty – 20mm diameter tubes Twenty four – 15mL or 17mm diameter tubes Forty – 12mm diameter tubes

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit…

…rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 (Holds 90 13mm tubes) Thomas No. 1217R42 (Holds 60 16mm tubes) Thomas No. 1217R43 (Holds 40 20mm…

This polypropylene rack has slanted sides to help prepare agar media slants in 13-16 or 16-20mm tubes. Media-filled tubes are autoclaved with the rack in a vertical position; then the rack is positioned to the preferred angle and media allowed to cool and harden. One side is inclined 5° to create a…

This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.

Good quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

Racks hold two rows of four tubes up to 20mm in diameter. Overall dimensions 108mm x 60mm x 121mm high (4 1/4 " x 2 3/8" x 4 3/4 "). Steam autoclavable at 121°C (250°F). Store and condition eight pH, Redox/ORP or ion electrodes in individual test tubes. Polypropylene rack is chemical and…

…Liquid Sample Instrument Platform contains the following items:  timer, two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer, tube rocker 110V.

… Each Liquid Sample Instrument Platform contains the following items:  timer, two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer.

…two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, vacuum pump assembly 110V, acrylic base, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer, tube rocker 110V, O-ring for vacuum pump assembly

…items:  timer, two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, vacuum pump assembly 110V, acrylic base, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer, O-ring for vacuum pump assembly.

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…Labconco Upper or Lower Standard Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is…

…gear rack allows an even more convenient use of the x/y movement. For full freedom of Illumination options, the new model has a complete and easy interchangeability of its 6V/30W Halogen bulb with LED modules. 30° inclined Trinocular head with 360º Swiveling eyepiece tubes for…