Tds Calibration Solution

…calibration solutions are cross checked using different test methods, premixed, and ready to use. OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with “Right-to-Know” requirements, and includes an MSDS. Solutions come in…

…conductivity and TDS User calibrated Large, clear LCD display Automatic temperature compensation The DiST testers are reliable, pocket-sized instruments that give quick and accurate readings of conductivity or TDS. Calibration is easy; simply immerse in calibration solution and adjust, using…

…probe, probe holder and starter calibration solution. TDS - PPM Monitor User selectable Hi/Low Set Point Manual 1 point calibration Visual LED alarm Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution Power Supply: 12 VDC adapter (included)…

Individual conductivity/TDS calibration solution pouches NIST traceable materials for high accuracy Contains right amount of solution for calibration No containers to clean or carry Pouches are ideal for on-site calibration and verification in the field. Pouches are airtight…

…LCD digits are easy to read. HOLD button freezes the reading on the display Calibration using solution standards Arrow keys allow fast setting to calibration standards Calibration data is saved even when the unit is turned off Instant-response probe and solid-state…

… The T76 is a waterproof TDS tester with automatic temperature compensation, 1 point manual calibration and a range of 0 to 9999 ppm (mg/L). T76 is supplied complete with protective cap, 20mL 6.44 ppt sachet of calibration solution, carton box, calibration screwdriver, batteries and…

…T75 is a waterproof TDS tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 ppm (mg/L). T75 is supplied complete with protective cap, 20mL 1382 ppm sachet of calibration solution, carton box, calibration screwdriver, batteries…

…the EC (20.00 mS/cm) or TDS (10.00 ppt) value. It also displays the temperature from 0.0 to 60.0°C (or 32.0 to 140.0°F) on the secondary level at the same time. EC59 is supplied complete with protective cap, 20mL 1413 µS/cm sachet of calibration solution, carton box, batteries and…

…meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. The MW401 has a range of 0 to 1990 mg/L (ppm) with a 10 mg/L resolution; The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

…to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. MW402 has a range of 0.0 to 10.0 g/L (ppt) with a 0.1 g/L resolution. The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

…fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS. AG900 is supplied complete with SE600 combination pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL 1500 ppm sachet of calibration solution, 9V…

…and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements. MW801 is supplied complete with SE600 combination pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL 1382 ppm sachet of calibration solution,…

…fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS. MW802 is supplied complete with SE600 combination pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL 1500 ppm sachet of calibration solution, 9V…

… Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory These standard solutions let you calibrate conductivity instruments to ensure accuracy If unopened, shelf life is one year; once opened, shelf life will vary by solution value Use when readings…

Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

Accurately calibrate your instruments with Myron L Company Standard Solutions. All solutions have an accuracy of +/-1% based on values published in the International Critical Tables and traceable to the National Institute of Standards and Technology.

…their testing program. With easy 1 point EC/NaCl and up to 3 point pH calibration, 7 memorized standard pH buffer choices, 6 memorized EC calibration solutions 2 point temperature calibration, the meter can be quickly calibrated to a higher temperature accuracy compared to other meters and it…

…of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000 count) Digital display with analog…

…Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature Waterproof housing (meets IP57) Automatic one button pH calibration (4, 7, and 10pH) Choice of 3 point pH calibration for better accuracy One point Conductivity calibration − automatically recognizes 8 calibration solutions…

All Myron L instruments are factory calibrated with Standard Solutions of known conductivity/TDS value and (when appropriate) with pH buffer values 4, 7 and 10. These solutions and buffers are traceable to the U.S. Government’s National Institute of Standards and Technology. Periodic…

Thomas Nos. 1200Q29 and 1200Q30 Simultaneous display of conductivity or TDS and temperature Automatic selection of range for best resolution Calibration by cell constant or standard solutions Automatic standard recognition Storage of up to 32 results Bi-directional RS232 link to…

…the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. Professional…

…the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. Professional…

…electrochemistry analysis with Thermo Scientific™ Orion™ Conductivity Standards and Solutions. Choose from a complete selection of conductivity accessories including conductivity standards and TDS (total dissolved solids) standards. All conductivity standards are traceable to NIST™…

…and 1 point manual calibration. The tester has a range of 0.00 to 10.00 mS/cm. The modular design allows easy electrode and battery replacement. C66 is supplied complete with protective cap, 20mL 1413 µS/cm sachet of calibration solution, carton box, calibration screwdriver, batteries…

…reading gathers data in specific time intervals Up to five point pH calibration with automatic recognition for USA/NIST and DIN buffers Fix pH calibration errors without a complete recalibration with calibration editing Selectable cell constant allows for use with 2- or 4-cell conductivity…

…tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 µS/cm. C65 is supplied complete with protective cap, 20mL 1413 µS/cm sachet of calibration solution, carton box, calibration screwdriver, batteries and instructions.

…function, calibration alarm (visible), battery life indicator, and probe status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data. Meter Kit includes Meter, conductivity cell 35608-50, Grip-Clip holder, calibration solution, two AA…

…DO probe, pH/mV/Temp electrode, polymer Conductivity cell, pH and Conductivity calibration solutions, batteries and hard carrying case. Measures Dissolved Oxygen concentration/saturation, pH, mV, Conductivity, TDS, Salinity, Resistivity and Temperature Automatic salinity compensation and…

…Four-digit LCD reads up to 9999ms/ppm. Factory calibrated with NIST traceable solutions, this Ultrameter can be supplied with both certification of traceability and NIST traceable solutions for definitive calibration. A single-point calibration simultaneously adjusts all three parameters to 1%…

…911110 Rinse Solution Pouches; STARA-CS Star A Meter Hard Carrying Case; STARA-AR STARA3226 includes: Star A322 conductivity meter, 013016MD Orion pure water (K=0.1) conductivity sensor with flow-cell, 011008 Orion 100 μS conductivity standard, 911110 Orion rinse solution pouch 10 pack,…

…sensor for Conductivity, TDS, Salinity, pH and Temperature measurements Includes DO600 Dissolved Oxygen meter with electrode, replacement membrane cap, electrolyte, and polishing paper Complete with 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 plastic cups, batteries…