Chemicals Solutions C
-
Traceable® conductivity standards are Certified Reference Materials, making one of the most accurate available All Oakton® Traceable® conductivity standards are NIST-traceable reference materials Supplied with a calibration report from an ISO 17034 and ISO 17025…
-
-
Conductivity Standards
chemForce™ (powered by Thomas Scientific)Harmonized #: 2501.00.0000 0000 Shelf Life (months): 12 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Ricca Copper Sulfate
Ricca ChemicalThe minimum requirement of the American Association of Blood Banks (AABB) and the Food and Drug Administration (FDA) for suitable blood donors is 12.5 g/dL hemoglobin level or 38% packed cell volume (hematocrit) for fingerstick or venipuncture sampling methods. Copper Sulfate Solution, Specific…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Calmagite Indicator 0.1% Solution (APHA)
Ricca ChemicalFormula: HO(CH3)C6H3N:NC10H5(OH)SO3H Formula Weight: 358.37 CAS Number: 3147-14-6 Synonym(s):
-
Conductivity Standard KCl 10 µS/cm
chemForce™ (powered by Thomas Scientific)Composition: Water 100%, Potassium Chloride 0% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Packaging Type: Poly Natural…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 5000 µS/cm
Reagents®Composition: Water 99.72%, Potassium Chloride 0.28% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Conductivity Standard 10,000 µS/cm
Reagents®Composition: Water 99.42%, Potassium Chloride 0.58% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 18 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Formula: CS2 Formula Weight: 76.14 CAS No.: 75-15-0 Storage Temperature: 2-8°C
-
Ricca Chemical Oxygen Demand Standard
Ricca ChemicalThe Ricca Chemical oxygen demand standard finds it application in wastewater treatment processes for the accurate measurement of pollutants in water, waste water and aqueous hazardous wastes.
-
84 µmhos/cm Conductivity Standards at 25°C
Inorganic VenturesInorganic Ventures' 84 µmhos/cm Conductivity at 25°C is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
147 µmhos/cm Conductivity at 25°C
Inorganic VenturesInorganic Ventures' 147 µmhos/cm Conductivity at 25°C is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
Chlorhexidine digluconate solution
MilliporeSigmapharmaceutical secondary standard; traceable to USP and PhEur Synonym(s): 1,6-Bis(N 5 -[p-chlorophenyl]-N 1 -biguanido)hexane; 1,1'-Hexamethylenebis(5-[p-chlorophenyl]biguanide) MDL Number: MFCD00083599 RIDADR: UN 3082 9 / PGIII
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ready to use solution. Contains mercuric thiocyanate and ferric nitrate. Preserved with 20mg/L of BRIJ-35.
-
-
Copper Sulfate 0.05M
ExaxolThe Exaxol 0.05 M copper sulfate is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory …
-
Conductivity Standard, 200,000 µS/cm (200 mS/cm) at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Synonym(s): Clostridiopeptidase A CAS No.: 9001-12-1 Application: Collagenase products offered by Sigma-Aldrich are prepared from culture supernatants of C. histolyticum . Most preparations contain collagenase, non-specifc protease, and clostripain activities. These enzymes act…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Same as Ceric Ammonium Sulfate. Standardized @25°C to within 0.1%. Traceable to NIST-SRM.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Potassium Chloride Conductivity Standard, 3000 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
1200 µmhos/cm Conductivity at 25°C
Inorganic VenturesInorganic Ventures' 1200 µmhos/cm Conductivity at 25°C is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
Synonyms: Cupric sulfate standard CAS No.: 7758-98-7 Suitability: This product is commonly used for protein determination by the Bicinchoninic Acid (BCA) method . Packaging: 12, 25 mL in poly bottle Packaging: Also available as part of the Bicinchoninic Acid Kit for Protein…
-
500 µmhos/cm Conductivity at 25°C
Inorganic VenturesInorganic Ventures' 500 µmhos/cm Conductivity at 25°C is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
