The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC, ANSI, ASTM test procedures. It accurately and quickly measures resistance between two points (RTT) and…

The 8812 Lapel Collar jackets are fabricated from light weight 88% polyester and 12% carbon fabric for unmatched operator comfort. Excellent for warm environments. Superior workmanship provides reliable panel to panel continuity. The JKC Series 8812 jackets maintains consistent continuity readings…

Dual Conductor wrist strap sets are used to maximize ESD protection. These specialized bands use two contact circuits to create a two paths two ground. WB0050: An expandable Speidel®* metal band available in small, medium and large sizes.

Heel Grounder Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 volts Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 High…

Conductive trash cans keep charged waste materials away from sensitive electronic devices and from chemicals that could be ignited by a spark. When grounded, the cans and liners will not hold a static charge and will contain materials safely. Transforming Technologies’ WBAS28MET conductive ESD…

The Ptec™ IN5140 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of…

The WB1600 Series Wrist Band and Coil Cord set is the most versatile and cost effective band set offered by Transforming Technologies. The soft, blue woven fabric and 360°curved buckle of the wrist band allows the skin to breathe and makes it very comfortable to wear. The band uses…

The Model IN5110 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of…

The Model IN5120 68KHz AC in-tool air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. Using AC corona technology, to make the air more conductive, Ptec™ ionizers produce a balanced stream of positive…

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent, controlled static drain and physical properties with highest level of protection. 0.0625″ thick. Resistant to degradation by inorganic acids, organic acids, reducing agents,…

The Transforming Technologies FSM2424 Field Service Mat is made from a rugged, three-layer embossed PVC material and provide service personnel with a static free work area for handling sensitive devices. The edges are bound for durability. The outer layer is resistant to punctures and tears. A…

Eliminate Static in confined areas without airflow with the StaticAIRE still air ionizer The StaticAIRE Still Air Ionizer quickly and effectively eliminates static without using airflow. It’s designed for use in a variety of localized applications where space is limited and is ideal for…

The one-size-fits-all WB7000 Dual Conductor Fabric Wrist Bands from Transforming Technologies are used with Dual Conductor Constant Work Station Monitors. The WB0070 wrist strap features a silver plated, monofilament, continuous thread woven together with elastic nylon for full conductivity and…

This conductive ESD floor runner has a non-slip, grooved surface that provides excellent traction and allows the mat to be easily cleaned. A v-groove emboss provides a non-slip surface that provides excellent traction and allows the mat to be easily cleaned. The ribbed matting is also very…

The VinylSTAT FM4 ESD floor runners and chair mats provide superior ESD properties along with the rigidity needed for today’s office or manufacturing envi-ronment. The ESD Chair Mats are made of rigid solid vinyl with a buried conductive layer, giving it consistent electrical properties.…

LPD Trade offers a quality line of ESD tools like spatulas, scrapers, scoops and shovels for hazardous environment including ATEX industry. All made of high quality conductive polypropylene. Warning: Since LPD Trade products are made of conductive material, do not use those items close to…

The BFN801 provides excellent balance and rapid charge decay for secure ESD workstation protection. The BFN 801 benchtop ionizing blower, with inherently stable AC technology, provides excellent balance and rapid charge decay for secure workstation protection. Designed to protect most sensitive…

Brushes remove static charges, resulting in the adhesion of particles such as dust to an object Soft hair brush designs prevents scratching Ideal for dusting balances, cuvettes, microscope slides, optics and instrument/computer screens Removes static as it brushes Conductive composite handle …

The CM1600 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…

Used in conjunction with Dual Conductor Constant Workstation Monitors, Transforming Technologies’ CC3000 series Dual Conductor Coil Cords provide unmatched reliability and value. A double insulated jacket provides incredible durability and a wide diameter straight plug makes it easy to insert and…

Our clear cellulose tape is a general purpose high tack tape with excellent holding power. It is ideal for general packaging in environments where static is an issue. Use to seal packages, containers, or supplies in manufacturing. Perfect for the electronics industry because the pressure sensitive…

Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe can be used to make measurements on floors, mats, workbenches, garments, seating or any other flat surface where the resistance between two points is required.

The IN3425 air ionizing nozzle is the perfect solution to ionize hard to reach areas. It produces a 68KHz AC output of approximately 2200V and a continuous stream of balanced air ions. A specialized piezoceramic high voltage transformer drives the technology making Ptec™ ionizers among the most…

The perfect solution for grounding chairs or carts in an industrial or manufacturing environment. The VinylSTAT FM7 is made of a rigid conductive vinyl that protects carpets from wear and tear while providing a path-to-ground for static charges. The ESD properties of the matting are permanent…

The HG4560 Disposable Heel Grounder is the perfect solution for plant visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Constructed of a durable non-woven fabric impregnated with carbon, our disposable heel grounders are comfortable to…

Patented (US patents 6,052,053 and 6,205,408) Dual Wire Wrist Strap provides redundancy Even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire Use with resistive loop technology continuous monitor Continuously verifies the proper…

The battery powered SRM330 is equipped with built-in parallel electrodes for quick surface measurements and includes two lightweight “travel” electrodes that eliminate the cumbersome weight of standard kits. When pressed, the travel electrodes simulate the 5lbs of pressure necessary to measure…

A high-quality ring terminal that accepts standard banana jack.  Can be used to add a ground point for items in electronics.  Made with copper and chrome.  Ring Size: 1/4 (0.125”) 

This SCS Dual-Wire Thermoplastic Wrist Strap consists of an insulative exterior with a conductive interior and a 3.4mm dual conductor jack. The wrist strap is light weight, low profile and safely makes contact with human skin. The “zipper” style latching mechanism easily adjusts to most…

Benchtop Blower Ptec™ IN2000 The Ptec™ IN2000 AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components and general static protection. The IN2000 emitter assembly can be quickly removed and cleaned which…

The WBASDM provides a user-friendly solution for heavy ESD trash containers. It locks on to the 44 gallon WBAS180 Transforming Technologies container. The 5 heavy-duty casters provide stability for loads up to 350 lb and two casters are conductive to provide a path to ground for ESD charges. …

The adjustable WB2500 series dual wire fabric wrist strap set features two 180 degree conductive paths around the wrist, providing maximum skin contact. The band is standard with two 4mm male snaps and is used with dual wire resistance based constant monitors. Dual wire wrist straps provide…