Sparge

The Agilent Technologies sparge probe replacement kit is suitable for use with chromatography system models of serial number above 13160. Application: For S/N Above 13160 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic…

The Agilent Technologies sparge probe replacement kit is suitable for use with chromatography system models of 995 - 13160 serial number. Application: For S/N 995-13160 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic…

The Agilent Technologies cleaned sparge probe is suitable for use with chromatography system models of serial number above 13160. Application: For S/N Above 13160 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. Specifications: 316l Stainless Steel Finish Ra 32 Or…

316L Stainless Steel Sparger Assembly with Stainless Steel Frit for 3 Liter Bioreactor System. Specifications: English Threads Material: 316l SST With Electropolish Finish Ra 32 Or Better Tubing Specifications: .250" OD X .152" Id Overall Length: 10 43/64" Insertion Length: 9 1/4"…

316L Stainless Steel Sparger Assembly with Stainless Steel Frit for 7 Liter Bioreactor System. Specifications: English Threads Material: 316l SST With Electropolish Finish Ra 32 Or Better Tubing Specifications: .250" OD X .152" Id Overall Length: 10 43/64" Insertion Length: 9 1/4"…

For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

Economy Three Hole Cap Systems Economical way to helium sparge and deliver mobile phases Cap body is manufactured from PTFE and is supplied with a TFE/propylene O-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of…

…5/16", 2-pk.* Clean-Cut Tubing Cutter, ea. Replacement Blade for Clean-Cut Cutter, ea. PEEK Union Connector 1/16", 2-pk. Mobile Phase Sparge Filter, 2 µm, ea. Mobile Phase Sparge Filter, 10 µm, ea. *Kit contains 1 wrench, replacement (cat.# 20110) is a 2-pk.

…three-hole cap is constructed of PTFE with a TFE/polypropylene O-ring and polypropylene screw collar. The Bottom-of-the-Bottle™ Inlet/Sparge filter prevents sparging bubbles from entering the mobile phase stream while allowing the pump to drawl all but a few mL of solvent from the bottle.

This compact general purpose regulator has many laboratory applications including air-drying glassware, sparging or evaporating solutions, and controlling pneumatic valves. It is constructed of lightweight aluminum with an elastomer diaphragm. Includes a 0–60 psig (0-414 kPa) gauge and either…

Sparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less critical.

Sparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less critical.…

Sparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less critical.…

…OD PTFE tubing when finger-tightened onto the precision-machined filter holder. The filter element is replaceable. Standard 10 µm porosity protects delicate pump components from particles but introduces very little pressure drop. 1/8" OD. May be used as a helium sparging diffuser.

Manufactured from 316L electropolished 1/4" stainless steel with hose barb. Ideal use for sparging of vertical sidearm spinner flasks. Includes polypropylene cap with 1/4" compression fitting and white silicone gasket. 10 Micron porosity frit for cell cultures where shear is critical. …

Sparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less critical.

Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes,…

…supply line. Bottom-of-bottle filters have slots in the body allowing virtually all liquid to be removed from the bottle, minimizing waste. Select from PTFE body/membrane or PTFE body/PE membrane filters. Filter bubbler, suitable for filtration or sparging applications, comes with a 316 SS filter.

2-port air stone stainless steel sparger assembly is designed for the sparging of gases into the vessel liquid media. This design allows access through the side arms with a screw on cap assembly. Fully autoclavable. Sparger assembly for 6l l/p over head drive vessel Fits thru a 45mm sidearm 316l SST…

2-port air stone stainless steel sparger assembly is designed for the sparging of gases into the vessel liquid media. This design allows access through the side arms with a screw on cap assembly. Fully autoclavable. Sparger assembly for 6l l/p over head drive vessel Fits thru a 45mm sidearm 316l SST…

…sparging filters have a 2µm stainless steel replaceable filter cup with a ferrule and nut for 1/8in O.D. tubing. A 10µm filter assembly is offered as an option. The solvent reservoir stand positions the filters for maximum uptake of the mobile phase. An economical solvent and sparging…

…The total protein concentration found in EX-CELL 302 is less than 1 mg/L. Pluronic(TM) F68 has been added at a final concentration of 0.1% to EX-CELL 302 to protect against shear damage in sparged bioreactor systems. Legal Information: EX-CELL is a registered trademark of Sigma-Aldrich Co. LLC

…reagent bottles and provides uninterrupted solvent flow to the solvent delivery system. Improves retention time reproducibility Reduces use of sparging gas Eliminates transfer of solvents after degassing Mix and match cap designs and reservoirs to fit your specific application Complete use of…

…and allows a reasonable amount of time for the safe disposal of liquid contents Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) Chemically inert glass prevents leaching of…

…the minimum working volume level including, one luer actuated sample port, one liquid inlet/outlet port, two liquid addition lines, direct sparging lines and a harvest line. All gas and liquid addition ports located below the minimum working volume incorporate check valves to ensure uni-directional…

…Ir(dF-CF3-ppy)2 (dtbpy) (1.12 mg, 1 μmol, 0.02 mol %) followed by addition of 2,6-lutidine (17.5 μl, 150 μmol, 6 equiv.) . The solution was sparged with nitrogen via submerged needle for 5 minutes and vial was placed in EvoluChem photoreactor with blue Kessil 34W LED or with a EvoluChem…

…use Sterile Stress and freeze resistant Non-pyrogenic Flexible PETG is a strong gas and vapor barrier, ideal for closed or CO₂ sparged culture conditions. The PETG roller bottles are cell culture treated and available in standard, extra long and expanded surface designs all with…

…CG-1167 HPLC Cap system provides the safest and most economical way of storing high performance, low pressure liquid chromatography mobile phase, sparging preventing bubbles from entering the system as well as collecting sample waste.The bottle is blue tinted plastic coated flat bottom, which…

…302 is less than 1 mg/L. Pluronic ® F68 has been added at a final concentration of 0.1% to EX-CELL 302 to protect against shear damage in sparged bioreactor systems. Caution: Do not freeze. Protect from light. Several components of the medium are light labile and should not be exposed to…

…302 is less than 1 mg/L. Pluronic ™ F68 has been added at a final concentration of 0.1% to EX-CELL 302 to protect against shear damage in sparged bioreactor systems. Caution: Do not freeze. Protect from light. Several components of the medium are light labile and should not be exposed to…

…302 is less than 1 mg/L. Pluronic ® F68 has been added at a final concentration of 0.1% to EX-CELL 302 to protect against shear damage in sparged bioreactor systems. Caution: Do not freeze. Protect from light. Several components of the medium are light labile and should not be exposed to…