Screw Caps Vials With Septa

Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…

4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for…

…top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10 series Septa. Cap…

4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact…

…screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top screw caps with the 8 mm septa installed. Septa for 8-425…

Open top without septa Polypropylene screw cap will not contaminate sample with syringe needle insertion-unlike phenolic caps that can flake.

…a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. Agilent…

Manufactured from amber 203 borosilicate glass Open top white polypropylene closures attached Closures supplied with PTFE-faced, silicone septa Vials packaged in corrugated trays with partitions Septa is PTFE-faced (0.005”) silicone (0.120”)

Manufactured from amber 203 borosilicate glass Open top white polypropylene closures attached Closures supplied with PTFE-faced, silicone septa Vials packaged in corrugated trays with partitions

…true bond at the molecular level of the septa and plastic cap, eliminating excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with PTFE/Silicone septa for excellent chemical resistance and…

Pre-assembled caps with Septa 10-425 thread finish

…a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. Agilent…

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

…with inserts Vials are available with black caps and a variety of septa to meet your application needs. 2 mL 8-425 screw top glass vials (2714S22, S23, S61) Vials accommodate a variety of autosamplers originally designed for narrow neck vials. Use with 8-425 screw caps. 2…

…volume Flat bottom ensures compatibility with inserts 8-425 thread design Original, narrow neck size The original, smaller opening vial with an 8-425 thread size screw cap. Vials are available with black caps and a variety of septa to meet the needs of your application. …

This magnetic screw cap has been developed for the CTC instrument. The vial has a precision thread with numberous threads to force the septa against the vial to seal it to be gas tight. The center hole is designed to be used for SPME as well as standard Headspace analysis, but still offers enough…

… For use with all headspace crimp top vials. Caps with safety feature release at approximately 45 psi. 20mm Headspace Crimp Caps with Septa (2714S39 to S42) Pre-assembled 20mm crimp caps with septa. Ready-to-use with any headspace crimp top vials. Ultra Clean 18mm Screw Top Caps with Septa…

Screw caps [for use with 2 mL vial (standard opening), thread 8-425] are available for use with sealing septa and solid caps with aluminum liners. Caps are offered in solid phenolic caps that can withstand a maximum temperature of 135 C.

Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast and…

PerkinElmer offers a variety of caps and septa to fulfil your application needs. Our screw thread vial caps use the revolutionary Inter-Seal ® . Using a process that bonds silicone/PTFE and other elastomeric compounds directly into thermoplastic closures eliminates liner fallout, while still…

…caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I. D. : 10 mm Finish: Screw Top Cap…

…closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I.D.: 9 mm Finish: Screw Top with Septa Description: PTFE/Silicone Septa with Blue Cap This Cap and Septa is also available in 1000/pack (Part No: N9306361)

…are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I.D.: 10 mm Finish: Screw Top Cap with Septa Description: PTFE/Silicone Pre-slit Septa with Black Cap *Must be purchased with Thomas item 1160C28

Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

Open top polypropylene screw caps supplied with PTFE faced silicone septa. Supplied in packages of 144.

Screw Top Convenience Packs are an easy way to get 500 of each component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, 500 screw top vials and screw caps with septa installed are kept handy and dust-free. Agilent Technologies products are intended for…

Preassembled closures minimize contamination during sample prep Tinplate caps are magnetic with an 8mm center hole 1227J06 includes a thin, soft durometer septum designed for SPME

…pack. Guaranteed for fit and compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I.D.: 9 mm Finish: Screw Top Cap with Closure Kit Description: Clear glass vial PTFE/Silicone septa with blue cap

…Scientific™ 9mm Amber Vial Convenience kits (Assembled) save time during sample preparation and reduce the risk of contamination. Each kit includes 100 amber glass vials and 100 screw thread caps with pre-assembled septa. The kit is packaged in convenient vial trays with clear covers or in…

Natural molded polypropylene closures are a convenient alternative when a resealable closure is not required. The thin membrane allows for easy needle penetration and the purchase and assembly of septa are not required with this easy-to-use one-piece closure.

Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Thermoset (phenolic) hole caps provide the widest…