Chromatography Vials

Compare Tool

Select up to 3 products

HomeAll Products

Vials Chromatography Vials

1 - 32 of 836
  • Plates manufactured in ABS (Acrylic Butyl Styrene) have good chemical resistance against acids and bases. Complete MTP System Includes: 96-Well Base Plate Choice of 4 Vial Sizes - 0.5mL, 1.0mL, 1.5mL and 2.0mL - Conical or Flat Bottom Spacer for 1.0mL, 1.5mL and 2.0mL Plates Cover …

  • Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast…

  • Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

  • Target DP Vial System

    National Scientific

    For Agilent 7673 and 1100 Series Autosamplers Wide cap profile for rotating or robotic arm autosampler trays 40% wider opening 33 expansion glass (Type I Class A) Borosilicate glass Convenience of a screw cap vial with the integrity of a crimp vial, I-D™ vials have…

  • Type I borosilicate glass Clear or amber Designed to work in Shimadzu and Waters WISP 48 Position Autosamplers. Choose from clear or amber Type I borosilicate glass. Vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the vial neck. …

  • Environmental EPA Vials

    J.G. Finneran

    Available in clear or amber borosilicate glass. Choice of closure and linter, including patented Top Hat™ liner system. Fixed (bonded) closures eliminate liner fallout.

  • F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

  • Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in…

  • Preassembled aluminum seals reduce contamination during sample preparation and save valuable time in the lab.

  • Non-Assembled Convenience Kits

    National Scientific

    Sample vials with PTFE-lined storage caps Available in clear or amber glass Each carton contains shrink-wrapped vials and PTFE-lined caps in plastic bags

  • Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal.

  • Manufactured from Type I borosilicate clear glass. The tapered bottom allows for the concentration of samples into the tip by solvent evaporation.

  • 12 X 32 mm Shell Vials

    J.G. Finneran

    Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature heavier walls for safer handling. Available with marking spots.

  • Conical Inserts

    J.G. Finneran

    Due to the conical design of the snap plug, limited volume inserts used in the shell vial stay centered and straight allowing for easy sample evacuation. Finneran black polypropylene inserts protects light sensitive samples from having a chemical reaction during sampling testing and storage.…

  • Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

  • Largest available variety Save reagents Requires less sample Limited volume inserts are available in a variety of designs to accommodate all size vials and all types of autosamplers. Polymer Top Springs™, bottom springs and metal springs act as shock absorbers that protect…

  • Aluminum Seals

    DWK Life Sciences (Wheaton)

    Tear-Off, Tear-Out, or Flip Cap

  • Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

  • 1.5mL Vial and Cap for Dionex® AS50

    Environmental Express

    1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top

  • Headspace Vials

    Agilent Technologies

    Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials…

  • Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

  • Target Snap-It Glass Vials

    National Scientific

    Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.

  • Pre-assembled packs come ready-to-use with cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Agilent Autosampler or any rotating tray automatic sampler.

  • For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…

Compare Tool

Select up to 3 products