Ptfe Stirrer

Compare Tool

Select up to 3 products

Ptfe Stirrer
1 - 32 of 172
Sort
View
Show
  • Precision PTFE Stirrer Bearings

    Wilmad-LabGlass - SP Scienceware

    …not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

  • Chem-Stir™ PTFE Stirrer Bearings

    Chemglass

    Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon® compression cap. The unique design of this…

  • Universal Chem-Vac™ PTFE Stirrer Bearings

    Chemglass

    …Glass, PTFE or Stainless Steel Stirrer Shafts Universal Chem-Vac™ PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL on GLASS, PTFE or S.S. stir shafts. Upper portion of bearing rotates with the stirrer shaft providing a flake-free seal. The bearing consists of a PTFE standard…

  • Banana Shaped PTFE Stirrer Blades

    Chemglass

    Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

  • Banana Shape PTFE Stirrer Blades

    Chemglass

    Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

  • PTFE 10mm Stirrer Blades

    Chemglass

    Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.

  • Stirrer Bars, Cylindrical, PTFE, 50mm. 2/PK

    Globe Scientific

  • Four-Blade PTFE Agitator Stirrer Blades

    Chemglass

    Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…

  • Magnetic Induction Stirrer

    labForce (a Thomas Scientific Brand)

    PTFE coating for chemical resistance Safety certified and approved: CE, SGS, RoHS2, WEEE Three Year Warranty Patent information: Community Design No: 003515337-0001-0002 Euro. Pat. App. 3 246 088 US Design Patent No. D814,045 Package includes: Magnetic Induction Stirrer

  • Stirrer Bearing, PTFE

    Chemglass

    PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE

  • Stirrer Blades, PTFE

    Ace Glass

    PTFE stir blades for button type stir shafts. 10mm OD shafts can be found in our product series 8068, 8070, 8074 and 8075. 19mm OD shafts can be found in our 8076 and 8077 series.

  • Heavy Duty PTFE 19mm Stirrer Blades

    Chemglass

    Stirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.

  • Stirrer Bearing, PTFE, Chem-Stir™

    Chemglass

    …GROUND AND POLISHED STIRRER SHAFTS. Chemically Resistant Vacuum (~5 Torr) and Pressure (~5 PSI) Polymer Blend Sleeve Provides Excellent Wear Resistance For Use With Polished Glass or S.S. Stirrer Shafts NEW Chem-Vac™ PTFE stirrer bearing provides a VACUUM…

  • Stirrer Bearings, PTFE, 25.4mm

    Chemglass

    Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having a 45/50 inner joint, a saddle o-ring, a bushing with compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE

  • Stirrer Bearing, PTFE, 6-10MM Shafts

    Ace Glass

    PTFE stirrer bearing featuring a non-shedding, fully enclosed, anti-whip, chemically resistant design. Models available for 6, 8 and 10mm glass, metal or PTFE stir shafts. Can be used in slight pressure or vacuum applications. Maximum recommended speed for continuous operation is 500 rpm. Unlike…

  • Stirrer Blades, PTFE, Oval, 10mm Shafts

    Ace Glass

    PTFE oval stir blades for 10mm OD button type stir shafts. 10mm OD shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Stirrer Turbines, Upper, PTFE, Pilot Plant

    Chemglass

    PTFE six blade turbine style agitator for use with reactor stirrer shafts. Shaft opening is drilled straight through to permit positioning at any height on the shaft.

  • Stirrer Blades Banana Type, PTFE, 10mm Shaft

    Ace Glass

    PTFE banana shaped stir blades for 10mm OD button type stir shafts. 3mm thick blades have a number of perforations and are designed to closely fit various sizes of round bottom flasks. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Stirrer Magnets, Raised Ring, PTFE, Octagonal

    Ace Glass

    Stirring bars with large, 25mm (1 inch) raisied center ring.

  • Stirrer Accessories, Stirrer Blades

    Dynalon

    Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Stirrer Bearings

    Chemglass

    Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…

  • Stirrer Shafts

    Chemglass

    Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8” wide flat.  Please Note: CG-2097-75 and CG-2097-100 are made from heavy wall tubing…

  • Stirrer Accessories

    Arrow Engineering

    …Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4" length allows angular and parallel misalignment…

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating

  • Stirrer Accessories, Blades

    Dynalon

    …overhead stirrers. Virtually unbreakable Operate at medium to high vacuum Fit standard ground glass joints May be used with all types of standard shaft stirrers in PTFE, glass or stainless steel with 6 or 9.5 mm diameter shaft. Feature internal adjustable precision glass- PTFE

  • Stirrer Bearings and Shafts

    Chemglass

    …insertion into the flask Special PTFE blades are not required. Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts Available in both Ground and Polished styles.A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir™…

  • Angled Stirrer Blades

    Chemglass

    Agitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm or 25.4mm OD stirrer shaft CG-2097 and are available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…

  • PTFE Gaskets

    Chemglass

    PTFE gasket is 0.015" thick with an opening to fit Chemglass stirrer shafts. Gasket is placed below the CG-2048 Safety collar to prevent wear as a result of the collar rotating against the stirrer bearing. Also useful as a dust cover.

  • Stir Bar Retrievers

    Globe Scientific

    Magnet permanently embedded in PTFE rod Ideal for retrieving magnetic stirrer bars from particularly sensitive or corrosive liquids

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Chem-Stir® Macro Stirrer Assembly

    Chemglass

    Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.