Nalgene Tube Racks

Compare Tool

Select up to 3 products

Nalgene Tube Racks
1 - 27 of 27
Sort
View
Show
  • …conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.

  • Unwire Half-Racks For 30 mm Test Tubes

    Thermo Scientific Nalgene

    …epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and freezing. Racks can hold tubes up to 30 mm diameter.

  • Round Floating Microtube Racks

    Thermo Scientific Nalgene

    …reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36 has 20 places and are 3 3/4" in diameter.…

  • Test tube supports (racks), S-shaped, made of a single heavy sheet of aluminum or stainless steel bent to form a solid, stable base with two perforated shelves. Smooth, flat surfaces simplify cleaning. Products are manufactured in the USA Custom sizes are available on a quoted basis

  • Test Tube Slant Racks

    Thermo Scientific Nalgene

    …Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are stackable when empty. After microwaving, set tubes

  • Unwire Polypropylene Test Tube Racks

    Thermo Scientific Nalgene

    Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

  • Unwire Half-Racks For 25 mm Test Tubes

    Thermo Scientific Nalgene

    …accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’ thermal properties allow for both autoclaving and freezing. The three-tier design is molded in one-piece, and the lower tier is suitable for 28 and 30 mL Nalgene® Oak Ridge…

  • Non-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.

  • Nalgene Cryoboxes

    Thermo Scientific Nalgene

    Ultra-low temperture storage of internally and externally threaded vials White polycarbonate box usable from -196°C to +121°C Transparent lid with molded-in numbers and coded grid Holds 81, 5 mL size vials. Overall 133 x 133 x 95 mm high.

  • Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with space-efficient Thermo Scientific™ Nalgene™

  • Unwire Polycarbonate Test Tube Racks

    Thermo Scientific Nalgene

    Usable in cold rooms and at subfreezing temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated…

  • Microtube Storage Box

    Thermo Scientific Nalgene

    …-150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube identification. 2591C69 takes 84 - 0.5 mL tubes; 2591C73 takes 64 - 1.5 mL tubes. Dimensions: 5 1/4” L x 5 1/4” W x 2” H. NOTE: not for use in liquid phase liquid…

  • Biotransport Test Tube Carrier

    Thermo Scientific Nalgene

    Designed for transportation of potentially hazardous materials in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 19” x 6” x 6” (495 x 165 x 170 mm). …

  • Rack Microtube Square PP 1.5 ml

    Thermo Scientific Nalgene

    …microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit conveniently inside 400 or 1000mL beakers Racks will float with a full load of filled tubes Tubes are supported below the lip while conical ends are immersed in water On benchtop, rack

  • Unwire Polypropylene Test Tube Peg Racks

    Thermo Scientific Nalgene

    …spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x 12. 9260B25 and B37 racks are 17 mm with an…

  • Test Tube Rack Unwire™ Wht 13 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Test Tube Rack Unwire™ Wht 16 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • High Density Polyethylene Safety Tray

    Thermo Scientific Nalgene

    …carrier with removable foam inserts for accommodating 100 mL, 250 mL and 500 mL bottles; remove inserts to accommodate bottles and unwire test tube racks With molded-in handle For safely handling up to six 1 Liter glass or plastic bottles. Overall dimensions 15” x 14” x 10 …

  • Polypropylene Utility Trays

    Thermo Scientific Nalgene

    Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

  • Latch Assy PC Nat

    Thermo Scientific Nalgene

    Closed-system carrier designed to protect the lab worker during transportation of Unwire test tube racks containing tubes or sample holders filled with potentially hazardous samples Tough and break-resistant Excellent visibility of contents Molded, easy-to-grasp side handles …

  • Sterile, Polypropylene Cryogenic Vials

    Thermo Scientific Nalgene

    Non-cytotoxic and non-pyrogenic Nalgene, linerless seal ring system External thread provides no risk of contaminating contents of vial Self-standing without a holder; conical bottom allows complete sample retrieval Deep-skirted closure allows single-handed aseptic technique without…

  • Cryoware Marker Set

    Thermo Scientific Nalgene

    For permanently marking cloth, cardboard and plastic Red, green, blue and black ink will not fade at ultra-low temperature Smudge-proof Consists of four, extra-fine point pens in red, green, blue and black.

  • CryoSleeve, Polyvinyl Chloride

    Thermo Scientific Nalgene

    Clear plastic sleeve encloses a CryoCane for extra security during handling and storage Replacement for cardboard sleeve Fits over most canes; 273 mm long. Allows quick location of empty spaces in the cane and easy identification of a particular vial or vials without removing the sleeve. Easy…

  • Cryogenic Vials and Containers

    Thermo Scientific Nalgene

    Array: 10 x 10 vials; vial size: 1.0ml and 1.5ml Dimensions (L x W x H): 133 x 133 x 52mm (5-1/4 x 5-1/4 x 2 inches) Material: polycarbonate Designed for ultralow temperature storage of one hundred cryogenic vials; increases freezer storage capacity by 23 percent over boxes that hold 81…

  • Aluminum CryoCanes

    Thermo Scientific Nalgene

    Holds five 1.0 to 2.0 mL cryogenic vials for storage in a liquid nitrogen environment Cryogenic vials snap into cane end-to-end; overall length 290 mm. Cane projects inward slightly to support base of each vial. CryoCane accommodates most other brands of cryogenic vials.

  • …hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport®, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml…

  • The UniRack™

    Simport

    …hold up to 80 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.