Male Glass Adapter

Ideal for use as a vent or for the introduction of pressure/vacuum Glass male Standard Taper joint with hose barb for tubing at 90° angle Thomas numbers 5737A01 and A03 take 1/4” tube fitting; others are 3/8”.

304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.

Of borosilicate glass With vented Standard Taper male joint on one end. The other end is fire polished for attaching Lyph-Lock flasks to valves.

304 Stainless Steel adapter for matching glass beaded process pipe to male NPT fittings, gauges and flanges.

Connecting, enlarging adapter with top female joint being larger than the bottom male joint.

Bushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.

Connecting, reducing adapter with top female joint being smaller than the bottom male joint.

Bushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.

With outer joint and external thread at top for making an O-RING-CAP-SEAL connection with mating male joints, inner joint at bottom and at 75 degree angle. Supplied with cap and O-Ring.

Omnifit shutoff adapter with 1/4"-28 male thread and 1/8" PTFE tubing.

Connecting adapter with top female and bottom male standard taper joints.

With outer joint and external thread to enable an O-RING-CAP-SEAL connection with mating male joints. 105 degree angle. Supplied with cap and O-Ring.

Stopcock available with glass or PTFE plug For regulating the flow of gases or liquids into reaction systems. Adapter consists of male standard taper joint fittng with stopcock and a 90° angle male hose barb. Thomas numbers 5738D01, D03, D15, and D17 take 1/4" i.d. flex tubing; Thomas…

…or moisture-sensitive systems. With inner joint at bottom and two outer joints externally threaded for an O-RING-CAP-SEAL connection with mating male joints. Supplied with two threaded caps with hole, two PTFE-faced silicone rubber septa and two O-Rings. For replacement caps, see 9590-45, -46, -47;…

Used for Microscale vacuum distillations. With outer joint and external thread at one end for making an O-RING-CAP-SEAL type connection with mating male joints, inner joint at other end and hose connection for vacuum. 105 degree angle. Supplied with cap and O-Ring

…Spinning Band Micro-distillation Column. With outer joint and external thread at one end for making an O-RING-CAP-SEAL type connection with mating male joints, inner joint at other end and 7/10 outer side joint for vacuum connection or stopper when using Spinning Band Column technique. 105 degree…

304 Stainless Steel NW flange adapters for use with circulators. Connections either terminate in M16x1, M24x1.5, or M30x1.5 male. There is no need for thread sealent or teflon tape. Connections only need to be hand tightened then given a 1/4 turn with a wrench. Compatabile with all circulator…

PTFE adapter, precision made, for use when making NPT thread connectors to Ace-Threds. One end designed to make leaktight seal with Ace-Thred without use of O-Rings, other end accepts NPT male thread. Can be used when making connection at top of rapid prep columns or rigid connection between…

…bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is…

Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

Adapter has a 1/4 " -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

Glass filled PTFE adapter for use with side outlet of the CG-1949-F / CG-1959-F Filter Reactor Base or the CG-1968-Q zero dead space detachable valve. Adapts 1" beaded pipe to a Male NPT. Requires a CG-1968-66, 1" beaded pipe coupling.

Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

…and column outlets permanently connected to a borosilicate glass barrel 20 μm porosity polyethylene bed supports are fixed in the column outlet Luer lock inlets and outlets on the columns, along with a wide variety of adapters, valves and fittings, provide simple and versatile tubing…

…borosilicate glass. Four different fixed bed length configurations are available: Luer Lock, non-jacketed: constructed with fixed polypropylene end caps, polyethylene bed supports, and Luer Lock inlet and outlet fittings. The Luer Lock connections on these columns are male. The polyethylene…