Injectable Glass Vial

Compare Tool

Select up to 3 products

Injectable Glass Vial
1 - 32 of 60
Sort
View
Show
  • Agilent Technologies

    Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts. Agilent Technologies products are intended for…

  • DWK Life Sciences (Wheaton)

    …caps are designed for closing vials of injectable drugs. Flip-off snap caps are pre-assembled with an ISO 8362-2 compliant elastomer stopper to simplify the production process. Container Closure Integrity (CCI) validated for use with ISO 8362-1 glass and COP vials Delivered sterile (RTU)…

  • MilliporeSigma

    Vials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, tan PTFE/silicone septum) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Caps are made from phenolic…

  • MilliporeSigma

    Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…

  • …Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery vials are wide opening, 1.5 mL with a 30µL reservoir. Perform sample concentrations and injections in one vial. Allow virtually total recovery of the sample.

  • Chromatography Research Supplies

    …manual-injection GC and GC/MS. Selected sizes have CenterGuide™ design which have a recess on the injection side to guide the needle to the same point with every injection. The CenterGuide requires less force for initial penetration. Minimizes tearing and coring. Packaged in glass vials.

  • …Premium Pack Amber Glass VOA Vials with 0.125″ Septa feature protective packaging with hard foam divider that hold vials securely separated, each in their own individual cell for ultimate vial protection. Hard foam sectional design allows clusters of nine (9) vials to be separated from…

  • Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

  • MilliporeSigma

    Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials are used on many autosamplers. They are made from clear glass and include graduations. …

  • Vials are suitable basically to inject samples from an autosampler. They are varied in sizes, though 2 mL vials are more commonly used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Application: Clear glass, screw top…

  • Glass Vials with 0.060″ Septa feature protective packaging, and a thinner septum that is optimized for automation. Hard foam divider holds vials securely separated, each in their own individual cell for ultimate vial protection. Hard foam sectional design allows clusters of nine (9) vials to…

  • 40 ml Amber glass vials, PTFE and silicone hole caps. Amber vials offer protection from harmful light and uv rays for light sensitive products. made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no catalytic…

  • …10 dram (40 ml) Clear borosilicate glass vial with 24-400 green pp hole cap & PTFE/silicone septa attached. clear vials offer maximum visibility. Made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no catalytic…

  • 20 ml (5 dram) Amber vials, green hole caps w/PTFE and silicone. Amber vials offer protection from harmful light and uv rays for light sensitive products. Made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no…

  • …<788>/EP 2.9.19 Particulate Matter in Injections (Vials and Stoppers), USP <85>/EP 2.6.1, The Bacterial Endotoxins Test (Vials and Stoppers) and lot certified to SAL <10-6 (Vials, Stoppers, and Seals), USP <660>/EP 3.2.1 Glass Containers for Pharmaceutical Use, and USP…

  • ALK-Abelló

    Empty injection vials are a sterile and nonpyrogenic Made with USP Type 1 glass

  • quick-ship

    Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of…

  • quick-ship

    Agilent Technologies

    …Opening Crimp Top High Recovery Glass Vials (2714Q59 and S49) 1.5 mL Vials with 30 µL reservoir For sample concentration and injection without transferring to microvolume inserts. Crimp Top Vials with Fixed Inserts (2715G02) Crimp Top Extreme Recovery Vials (2714U76) Patented design…

  • Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration Agilent Technologies products are intended for sale/shipment within the…

  • Agilent Technologies

    12 x 32 mm, Type 1 borosilicate glass Compatible with standard crimp closures 1.5 mL total volume Less than 5 µL dead volume Micro-V vials are compatible with standard crimp closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. They are…

  • Thermo Scientific Sun SRi

    Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for convenient sample…

  • Thermo Scientific Sun SRi

    Vials feature a 6mm diameter opening for easy filling 10-425 vials are suitable for many instruments where the vial remains in sample trays during injection Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate class Glass vials have a graduated, write-on patch for…

  • EP Scientific Products

    …borosilicate glass Open top vials are assembled with polypropylene caps with 0.060" or 0.125" PTFE/silicone septa Closed top vials are assembled with polypropylene caps with 0.125" PTFE /silicone septa Included polyethylene dust covers protect injection surface from contamination…

  • Agilent Technologies

    …to 135°C. Can be used with crimp or snap caps. 1.5 mL Wide Opening Snap Top High Recovery Glass Vials (2714S59) Wide opening, 1.5 mL vials with 30 µL reservoir. For sample concentration and injection without transferring to microvolume inserts. Can be used with snap or crimp caps. Agilent…

  • Agilent Technologies

    PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

  • MilliporeSigma

    Vials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

  • MilliporeSigma

    Vials, clear glass (1.5mL) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

  • quick-ship

    Thermo Scientific Sun SRi

    Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for…

  • Thermo Scientific Sun SRi

    Vials feature a 6mm diameter opening for easy filling 10-425 vials are suitable for many instruments where the vial remains in sample trays during injection Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate class Glass vials have a graduated, write-on patch for…

  • …of the sample to be withdrawn. These inserts are self-aligning and stand straight. Conical Glass Inserts (2714S15) Conical inserts require no springs and are ready to drop into the vial for injections. The most economical choice for microvolume sampling. Flat Bottom Inserts (2714M89, S16, S17)…

  • Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Attached polypropylene hole caps are known for good impact strength, cost effectiveness, and…

  • Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Thermoset (phenolic) hole caps provide the widest…

Compare Tool

Select up to 3 products