Graham Condenser

Condenser for use in cooling of the scrubbing fluid. Graham coil type condenser having 1/2" Swagelok® tubing for use with CG-1975-20 compression fitting. Overall length is ~350mm with effective length of 250mm. Hose connections have 9mm OD small serration and a 10mm OD large serration.

Graham condenser is designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread connector.

The Graham Condenser has a coiled inner tube to allow a greater surface for coiling and condensation. Made from heat resistant borosilicate glass. The inner coil is sealed to the outer coil producing a leak proof unit.

Borosil® Graham Condensers are a coiled distillate option that have an interchangeable inner and outer joint with a drip tip. The Graham Condenser has a coiled inner condensation tube providing a larger surface area for highly efficient cooling. Typical uses are for a chemical distillation…

Graham Coiled condensing tube is sealed into water jacket Inlet and outlet tubes on opposite sides of jacket With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has 19/38 joints; others have Standard Taper 24/40 joints

Reflux condenser with the coolant circulated through the inner coil instead of through the jacket as in the Graham style condenser. Condenser has standard taper top outer and lower inner drip tip joints. Hose connections have an O.D. of 10mm at the middle serration.

For use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.

These PYREX® condensers have a high surface area per unit length of the 300mm long jacket with a 24/40 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies. Condenser tubulations are approximately 10mm O.D.

Condenser has a top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

…and Graham Condenser. The flask is fitted with a 24/40 ground glass penny stopper and the extension arm is fitted to the condenser with a 19/38 ground glass fitting. The kit is supplied with a support stand, buret clamp, extension clamp, clamp holder, flask 500ml with ground glass stopper, graham…

Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have 24/4 ground glass joints, but we also sell Graham condensers with standard joints . PRODUCT WARNINGS WARNING: This product can…

With standard taper 24/40 outer joint at top. Hose connections are size D, for 3/8in ID tubing.

With standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D, for 3/8in ID tubing. con-nections are size D.

Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have standard joints, but we also sell Graham condensers with 24/40 ground glass joints . PRODUCT WARNINGS Our products are not toys . Use…

These PYREX® condensers have a high surface area per unit length of the 200mm long jacket with a 19/38 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies Condenser tubulations are approximately 10mm O.D.

Graham Condenser Joints: 14/20, 19/22 and 24/40 available Jacket Length: 120, 200, 250, 300 and 400mm available Hose Connections: 8 or 10mm available **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

…perfumes. The Flask and Graham Condenser are made from a high quality borosilicate glass and are provided with 24/40 Ground Glass Joints. The complete kit contains: Round Bottom Flask 250ml with 24/40 ground glass joint, Adapter Arm with 24/40 ground stopper, Graham Condenser 250mm with ground glass…

…hardware necessary for simple distillation experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand (6"X9") with 24" Rod Swivel Burette Clamp Extension Clamp …

…that feature 24/40 Ground Joints which allow secure fits and ease in assembling the apparatus. The complete kit includes a Kjeldahl Bulb, Graham Condenser with coil for greater cooling surface - 250mm, Flat Bottom Boiling Flask, Drip Tip Adapter, Erlenmeyer Flask - 500ml, Support Stand, Burette…

…with a 24/40 ground glass joint (#FRB500-24-40) 1 Erlenmeyer Flask, 500ml capacity with a 24/40 ground glass joint (#EF500-24-40) 1 Graham Condenser, 300mm long with 24/40 ground glass joints 1 Distilling Arm with 24/40 ground glass joints (#4009) 1 Support Stand 1 Support Ring and…

…MICRO ALLIHN CONDENSERS, COMPATIBLE WITH METTLER EASYMAX, 101mm OAL, GL-14 top thread, 10/18 lower inner joint, GL-14 thread inlet/outlet. Supplied complete with caps with apertures and hose connections.Mettler Easymax® is a registered trademark of Mettler Toledo. MICRO GRAHAM CONDENSERS,…

…and phenol distillation. Flask has a flat bottom and a distillation head with a 19/38 joint Supplied with a Standard Taper stopper Condenser is Graham-style, having a 200 mm jacket with a 19/38 joint at the top only For method, reference APHA Examination of Water and Wastewater:…