Glass Tubing Connector

Compare Tool

Select up to 3 products

Glass Tubing Connector
1 - 32 of 107
Sort
View
Show
  • Tricorn Columns

    GE Healthcare

    …Packing Connector and the appropriate glass tube. Tricorn Packing Connector includes one packing connector and two EPDM O-rings. Packing connectors are available in three sizes for using different i.d. tubes: 5-5 is for 5-mm tubes on both sides; 5-10 is for a 5-mm tube on one side and a 10-mm tube

  • Adapter, Joint To Tube Compression, Right Angle

    Ace Glass

    Glass standard taper and spherical joint adapters featuring a right angle ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Tube, Connecting

    Ace Glass

    Straight reducing connector tube, with ends of different size. Sold in packages of 6.

  • Safe-Lab® Joint Tubing Adapters

    Bel-Art Products

    …of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing in a 24/40 joint. Available for 8 and 10mm diameter glass tubing

  • Connector, Ace-Safe, Tubing, PTFE

    Ace Glass

    Ace Safe threaded tubing connectors used to connect flexible tubing to #7,#11 or #15 Ace-Threds. Allows for easier connect-disconnect of tubing. A much safer design than glass hose barbs. All PTFE construction for lower extractables and higher temperature capability than the standard…

  • Adapter, Nylon or PTFE, NPT, Tubing to Ace-Thred

    Ace Glass

    …and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is supplied with one FETFE o-ring (-176 does NOT come with o-ring). Adapter is available in nylon, HDPE (High Density Polyethylene), or PTFE. -120 and -125 are PTFE, MNPT to FNPT connectors.

  • Connecting Tubes

    GSC International, Inc.

    …length 14mm arm length "Y" Shaped Glass Hose Connector. Available in the following sizes: 1/4" (6mm) arm length 5/16" (8 mm) arm length 3/8" (10mm) arm length 1/2" (12mm) arm length Straight Connecting Tube 8mm od x 63mm length

  • Connectors, Threaded, Ace-Thred

    Ace Glass

    …threaded connectors, available in glass or 18-8 type 303 free machining stainless steel. For use in place of ground glass joints on flasks, columns, etc. Threads offer positive pressure O-Ring seal when used with fittings like 5837, 5838, 5840-5846, and 7506. Size mm refers to I.D. of tubing below…

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • Y-Shaped Hose Connectors

    DWK Life Sciences (Kimble)

    Useful in connecting apparatus Glass Serrated tips hold tubing in place

  • Bushing, Ace-Thred Connector

    Ace Glass

    Bushing connector for joining an Ace-Thred to a reduced end tube. Assorted bushing and o-ring materials.

  • Disposable Tubing Set

    Corning

    USP Class VI certified C-FLEX® tubing Accommodates both 2L and 4L bottles Male MPC connector with cap PureFit® tube clamp system Autoclavable *ADCF - Animal Derived Component Free **MPC - Medical grade Polycarbonate

  • Adapter, Chromatography Column to Tubing

    Ace Glass

    Internal threaded bottom drip adapter with or without flow regulator valve. 1/4"-28 or NPT internal threads. Supplied with packing support and o-ring. For use with all Ace-Thred chromatography columns.

  • Condenser, West, with Ace-Thred Connectors

    Ace Glass

    …#15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15 Ace-Thred. Drip tip has a bump and groove that restricts blowout when secured with 7506-06 Bushing and O-Ring. Inlet/outlet have #7 Ace-Threds for use with Ace-Safe 5853 easy connect/disconnect tubing connectors.

  • Condenser, Liebig, with Ace-Thred Connectors

    Ace Glass

    No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include

  • Condenser, Allihn, With Ace-Thred Connectors

    Ace Glass

    Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.

  • Adapter, Joint To Tube Compression, Vertical

    Ace Glass

    Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    …the connector provides greater flask stability, as tubing angled downward has less tendency to tilt the flask Flasks are designed for vacuum to 29” of mercury Made with a heavier wall than a standard Erlenmeyer flask Manufactured from 33 expansion, low extractable borosilicate glass

  • Adapter, Joint To Tube Compression, Right Angle, Drip Tip

    Ace Glass

    Glass standard taper joint adapters featuring a drip tip and a right angle ground glass tube sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Adapter, Joint To Tube Compression, Right Angle Tee

    Ace Glass

    Glass standard taper joint adapters featuring a drip tip and right angle tee ground glass tube sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Adapter, Joint To Tube Compression, Vertical, Drip Tip

    Ace Glass

    Glass standard taper joint adapters featuring a drip tip and a vertical ground glass tube sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • XK Columns

    GE Healthcare

    …solvents used in liquid chromatography of macromolecules. XK empty columns provide reliable and reproducible separations. The tube material is of borosilicate glass, which allows for visual inspection of the media bed. The columns are made of biocompatible materials that exhibit excellent chemical…

  • Adapter, Joint To Tube Compression, Right Angle Tee

    Ace Glass

    Glass standard taper and spherical joint adapters featuring right angle tee ground glass sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Connector, Ace-Safe, Tubing, Polypropylene

    Ace Glass

    Tubing connector, used to connect flexible tubing (1/4", 3/8", 1/2", 3/4", 1"ID) to #7, #11, #15 or #25 Ace-Thred for easy, safe connect/disconnect. 5029/7506 Nylon bushing slides over serrated end and secures PP connector in thread with silicone O-Rin

  • Disconnects

    Dynalon

    Quick Disconnects LDPE. These polyethylene quick disconnects are useful for joining tubing of glass, rubber, or plastic. Connectors fit tightly together. They are tapered to accommodate a range of diameters. Replaces expensive adapters.

  • Union, 1/4in-28unf, PTFE

    Ace Glass

    PTFE male nipple, 1/4"-28", for use with packed columns and solvent delivery systems.

  • Sterile Bottle-Top Filters

    Corning

    …identification. Prefilters are included. Polystyrene funnels have either 33 or 45-mm polyethylene screw connectors to attach to media bottles with corresponding neck size and standard GPI threads. Complete with glass prefilter, filter and polypropylene tubing connector. Media bottle not included.

  • Adapter, End Fitting, 1/4"-28, Ace-Thred, Michel-Miller

    Ace Glass

    …locknut. No need to over-tighten. Ace-Thred adapters feature a 1/4-28unf tap, with or without a 18-8 stainless Helicoil insert for durability. See our glass column product families, 5795 and 5820, our 5854 1/4-28unf tap tubing connectors, our 5814 and 5848 packing supports and our 12684 PTFE tubing.

  • Disposable Filter Units

    …liquids at pressures up to 125 psig Glass fiber element, nylon housing Autoclavable Transparent Nylon housing contains permanently bonded filter tube of borosilicate glass fibers with fluorocarbon binder. Connectors take 1/4” tubing. Can be sterilized with ethylene oxide or by…

  • Filter Column, Michel-Miller

    Ace Glass

    …enters column. Threads are #7 Ace-Thred for use with 5801-07 End Fitting. Usually positioned, in line, between pump and column using 1/4"-28 tubing connectors such as 5854, 5855 or 12724. Glass only is supplied. Fittings must be ordered separately. Filter material, such as glass wool, not supplied.

  • Ferrules, Graphite, High Temperature

    Ace Glass

    Single piece, high purity graphite ferrules, no back ferrule needed, no organic binders used. Ideal for glass-to-glass or glass-to-metal connections. All sizes are used with #7 Ace-Thred. Due to its high purity and unique properties, these ferrules make a monomolecular seal, one of the strongest…

  • Rapid Preparative Chromatography System

    Ace Glass

    …suitable for use to pressures of 50 psig, operation behind a shield is recommended. Resevoir is 2L or 3L capacity, epoxy coated and pressure tested. Complete item includes:Brass or glass manifold, pressure gauge, pressure relief valve, column, tubing, and appropriate connectors, fittings, etc.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.