Glass Oil Bath

Compare Tool

Select up to 3 products

Glass Oil Bath
1 - 32 of 35
Sort
View
Show
  • Oil baths heated by Instatherm®, an integral noble metal alloy fused permanently to the glass & covered with a tough silicone rubber treated glass cloth insulation which serves as a thermal barrier as well as protection against physical shock. Rapid heat response - low thermal lag. For…

  • An extremely stable, medium viscosity, silicone oil. Available in two temperature ranges: Low Temp. maximum 180 degree C; or High Temp. maximum 230 degree C. Neither oil shows discoloration after 40 hours at maximum temperature.

  • …to 210 ±2°F Holds one 2” x 15” (51 x 380 mm) hydrometer jar. Top of jar extends 1 1/2” (38 mm) above top of bath for easy viewing of hydrometer. Insulated double-wall construction with stainless steel tank and shelf and finished steel exterior. Variable speed…

  • Formula: [-Si(CH3)2O-]n CAS No.: 63148-62-9 Density: 0.967 g/mL at 20 °C Packaging: 1 L in glass bottle Packaging: 250 mL in glass bottle

  • …Reid Vapor Pressure determinations using immersion bombs. The unit is protected by an overtemperature control circuit that interrupts power should bath temperature exceed cut-off point. Dual LED displays provide actual and setpoint temperature values in °C/°F. Dimensions: 30” L x…

  • …heavy-walled glass vessels coated with Instatherm® to accommodate larger and taller vessels. A thermocouple well is imbedded in the insulation. Designed to operate at up to 250 degrees C. Do not run dry or above max voltage. Bare, flat bottom suitable for use with magnetic stirrers. All baths

  • …oscillations per second UR 1, UR 2 and UR 3 ultrasonic baths clean test sieves, microprecision sieves, glass and metal components as well as metallurgical and geological samples. In particle size analysis, ultrasonic universal baths are used to prepare suspension samples for wet screening or…

  • Low form glass vessels heated by Instatherm® similar to 9601's, except these have a permanently attached 12' PTFE covered power cord with 2-prong plug for direct insertion into controllers. Power cord cannot be removed from the bath accidently or on purpose, thus avoiding a possible hazardous…

  • …drying. Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into…

  • Ace Glass

    For use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size

  • Ace Glass

    For use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size

  • Koehler

    Manual unit glass-covered dial, 114 mm diameter, reads from 0 to 400 in 0.1 mm divisions and has zero adjustment and reset Platform is 152 mm diameter, scribed to aid in centering of sample Cast-iron base has spirit level and leveling feet Release is simple leaf-spring type …

  • DWK Life Sciences (Kimble)

    For gravimetric oil and grease Three position linear system Heating mantle, controller and splash guard are required for complete system (clamps and support included): power 15 amps - 115 volts. Refrigerating circulator recommended for system water coolant: -4°C. Proper ventilation…

  • …Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Individually boxed. Minimum sample volume: 7 mL. Require liquid bath depth of 203 mm (8"). Calibrated viscometers are supplied with a certificate of calibration and instruction sheet. Viscometers have the…

  • …form in the cone and are easily removed through the vacuum connection at the top. The unique design allows the user to submerge the flask in an oil bath almost to the bottom seal on the cooling jacket thereby avoiding premature condensation. 25 mL size has a 34/45 joint; 50 mL size has a 45/50…

  • …lapse controls Water-oil heating bath with integrated carry handles with safe handling Heats up quickly because of optimized bath volumes Cooling surface 1,200 cm² Push-off mechanism to loosen tightly fitting pistons Digital water - oil heating bath with integrated carry handles …

  • MP Biomedicals

    Xylenes are aromatic hydrocarbons. Xylene is used as a solvent. It is used in the laboratory to make baths with dry ice to cool reaction vessels, and as a solvent to remove synthetic immersion oil from the microscope objective in light microscopy.

  • …cut-back asphalts and road oils at 140°F and asphalt cements at 275°F in the range of 30 to 6000 centistokes by ASTM Standard D 2170. It is recommended that 9726A20 or A25 Constant Temperature Bath be used for work at 275°F. Can be filled and cleaned while in bath. Minimum sample volume…

  • …asphalts and road oils at 140°F (60°C) and asphalt cements at 275°F (135°C) in range of 30 to 6,000 centistokes according to ASTM Standard D 2170 (see Table 3). Can be filled and cleaned while in constant temperature bath. Minimum sample volume: 1 to 3 mL . Requires liquid bath depth of 230 mm…

  • …"safety stop" function, if the power cuts out the evaporator piston is automatically lifted out of the heating bath. Adjustable end position recognition to protect the glass from breaking Speed range from 20 to 280 rpm Smooth start from 100 rpm Digital speed display Moves…

  • …to specially designed glass guides, the vertical condenser makes extremely efficient use of the 1500 cm² cooling surface. Digital displays for speed and heating bath temperature enable optimum control of all distillation processes. New: 4 l heating bath integrated safety lift-out…

  • Ace Glass

    …insert for our 1200ml, Ace 9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which features…

  • BYK-Gardner

    …solid bar aluminum and the orifice is made of brass. Calibrated cups are calibrated against standard oils referenced to certified NIST oils. Ford Cup Accessory Kit includes a cover glass for removing excess sample from cup, a bubble level for leveling cup and stand, a stainless steel beaker…

  • DWK Life Sciences (Kimble)

    …the determination of emulsifying and demulsifying tendencies of lubricating oils (ASTM D1401). “TC” appears on each cylinder and indicates the cylinder is calibrated to contain Round base to fit baths in which this cylinder is generally used Pour spout Scale is durable…

  • …most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced…

  • …most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced…

  • Holland Green Science

    …crude oil. The system is highly efficient and easy to use. The bath temperature of up to 180°C covers all common solvents and even allows for in-evaporator decarboxylation if required. Safety: cTUVus and CE rated Safety coated glassware to protect users in case of glass breakage…

  • …element eliminates the local super heating com- monly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask is coated to within…

  • bath.   Elma tec clean A4 Universal Ultrasonic Cleaning and Degreasing Solution Alkaline ultrasonic cleaning and degreasing concentrate Cleans metals, glass, rubber, ceramics and alkaline-resistant plastics Removes cutting and machining coolant, grease, oils, soot,…

  • …element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and accurate. Supplied with silicone coating for insulation and protection. Contacts are standard banana plugs. Use with…

Compare Tool

Select up to 3 products