Gel Casting System

Compare Tool

Select up to 3 products

Gel Casting System
1 - 32 of 64
Sort
View
Show
  • Band-It™ Mini Electrophoresis System

    labForce (a Thomas Scientific Brand)

    …running: gel tank, power supply and two casting sets. Ideal for personal use, small laboratories or the classroom, this gel box/power supply combination is compact and easy to use. Complete system, includes gel box, power supply and casting sets Quick and easy gel casting, no tape, clamps…

  • …nucleic acid electrophoresis. Large format vertical gel system Electroblotting and gel electrophoresis in same universal gel tank Quick assembly system for ease of use Complete system allows casting of gels and running of gels at same time increasing efficiency Innovative…

  • …end gate casting design provides a leakproof seal without tape. Built-in leveling ensures the casting of flat, uniformly thick gels. Sample loading is enhanced through use of micro well pipette format combs (and a multichannel pipette) engineered specifically for the system. These combs…

  • …plates, two notched glass plates, two notched alumina plates, combs (P8DS and P8D9 have two combs: 10 well, 0.8 mm thick; P10DS have four combs: two 1-well and two 20-well, 1.5 mm thick), spacer set (P8DS and P8D9: 0.8 mm thick; P10DS: 1.5 mm thick). Package sets include: Joey Gel Casting System.

  • Easycast Mini Electrophoresis Systems

    Owl Separation Systems

    …banding All-in-one EasyCast gel casting system allows the gel to be cast and run in the same unit. No tapes, casting dams or other accessories are required. UV Transmissable (UVT) gel tray allows user to view bands on a transilluminator without removing the gel from the tray. The tray can…

  • …CS-9615 is a Casting Fixture built to hold and seal the GB-9615, 23.5cm (wide) x 15cm (long) Gel Bed, during the pouring of agarose gels. This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed. The CS-9615 is constructed of cast acrylic…

  • …Ready-to-load samples For 6 gels Agarose gel electrophoresis is a powerful analytical method for the separation of biomolecules. The Principles and Practice of Agarose Gel Electrophoresis kit, 4313B01, demonstrates the basic procedures, including gel casting and sample application and…

  • Joey™ Protein Gel Caster

    Owl Separation Systems

    …two gel assemblies. They may be heat sealed for later used. Spacer placer helps prepare the cassette for proper casting . Spacer plate provides even pressure across gel. Adjustable thumb screw clamping system makes casting gels extremely easy. Three-point leveling system ensures uniform gel casting

  • Casting Chamber For 14cm L Gel Trays

    Owl Separation Systems

  • The Otter™ Sequencing Gel Caster

    Owl Separation Systems

    gel from leaking. No taping or special assembly is required and because the system is so simple to use you’ll cast a perfect gel in no time. The system is fully adjustable to accommodate glass plates from 20 cm to 42 cm wide and 48 cm long. Complete System Includes: Adjustable Casting

  • gel, providing greater control over the voltage gradient and run-time UV-transparent acrylic casting tray - allows the user to handle the gel on the transilluminator with minimum risk of exposure to hazardous ethidium bromide Super-Seals - available as an accessory for flexible casting

  • …tubing Two pipe plugs to seal the buffer circulation ports if recirculation is not used One bull’s eye level for gel and buffer leveling One pair of 122 cm (48”) red and black premium power cords An accessory gel casting system and many more combs are available for the H11.14.

  • DALT six Gel Caster holds up to six 1.0-mm or 1.5-mm cassettes with separator sheets for casting homogeneous or gradient gels. If fewer gels are to be cast, the unused volume is filled with blank cassette inserts and filler sheets.

  • … This double slab Vertical System allows two gels to be run simultaneously under identical buffer conditions in an 18 x 16cm format. A soft silicone sponge gasket and notched inner plate ensure a perfect seal and prevent leaking. The system uses a traditional casting method. Both the upper and lower…

  • Buffer Puffer Electrophoresis System

    Owl Separation Systems

    …60°C) during casting. There are no tape, casting dams or other accessories required to cast gel. Safety interlocking lid features attached three foot long power supply leads. Each system features the all-in-one EasyCast gel casting system which allows the gel to be cast and run in the same…

  • …is a labor intensive multi-step procedure requiring gel casting, buffer preparation, and system assembly prior to running. With the introduction of precast gels, one step was eliminated. Now the EZ-gel system integrates a precast gel and running buffer into a simple, compact disposable…

  • …gates for easy, tapeless gel castings Adjustable height combs Horizontal Gel Boxes are designed for ease of use, safety and durability. Sizes range from a mini gel system to a maxi gel system that can accommodate up to 450 samples in a single run. Gel tanks are molded for leakproof…

  • DIGE Gel

    Cytiva

    …Immobiline DryStrip Gels (IPG Strips) to the top of the polyacrylamide gel. The capacity of the buffer system is similar to the commonly used laemmli (Tris-Glycine) buffer system, and the separation performance of DIGE Gel is comparable to 12.5% laemmli gels (1). DIGE Gel and DIGE Buffer Kit offer…

  • Gator™ Electrophoresis System

    Owl Separation Systems

    …A1 and A2 large gel systems Electrode placement ensures a uniform electric field and clear banding Durable acrylic construction Three point leveling ensures flat, even gels Leak-resistant gasketed end gates Durable, acrylic gel casting system has an UV transmissible gel tray that allows…

  • The FlashGel™ System (Cat. No. 57067) contains a FlashGel™ Dock, a FlashGel™ Camera, a pack of 1.2% FlashGel™ DNA Cassettes, Loading dye and Marker.

  • …is a labor intensive multi-step procedure requiring gel casting, buffer preparation, and system assembly prior to running. With the introduction of precast gels, one step was eliminated. Now the EZ-gel system integrates a precast gel and running buffer into a simple, compact disposable…

  • Gator Wide Gel Electrophoresis System

    Owl Separation Systems

    Built-in buffer exchange Run 25 to 600 samples on a single gel Multiple comb slots The Gator horizontal A3-1 wide system can run from 25 to 600 samples on one gel. The gel can be cast in varying lengths to help conserve agarose when fewer samples need to be run utilizing a wall comb.…

  • The IB57020 is a UVT casting tray designed for use in the IB57000 (HR2525 Horizontal Electrophoresis System). It is constructed of OP-1 grade cast acrylic to allow the passage of UV light during the viewing the elecrophoresis gel run. This tray produces a gel measuring 25x25cm, and has 4 equal…

  • The MaGELin Universal Protein system is designed to accommodate numerous gels in 10 x 10cm pre-cast and 10 x 10cm hand-cast. Includes the following: Buffer Tank Gel capture device Vented lid Power cords Buffer dam 2-place casting system Three sets of 10 x 10cm glass slides Two sets of…

  • gels to be blotted at once Load, clamp, and cast The gel module is simultaneously a casting stand and an upper buffer chamber with integrated clamps. Simply assemble the gel sandwich of plates and spacers, clamp it onto the upper buffer chamber, then pivot the sealing gasket and cast the gel.

  • …Gel-O Submarine system. It's built to hold and seal the GB-3210 - 15cm (wide) x 10cm (long) Gel Bed, during the pouring of agarose gels This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed Constructed of cast acrylic and…

  • …(long) UVT gel casting tray for use in the JSB-302 Double-Wide Mini Gel-O Submarine system Ideal for saving agarose when shorter gel runs are sufficient This Gel Bed mates with the CS-3210 casting fixture for pouring agarose gels Constructed of 3/16" thick, OP-4 Cast Acrylic to allow…

  • Multichannel Performance Labnet's ENDURO™ Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a…

  • …placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank. ELECTROBLOTTING INSERT The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in…

  • …and features a viewing area above the gel. Current will only run through teh system when the lid is properly in place on top of the gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the myGel Mini system, as are double-sided combs. The smaller…

  • …mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs. Molded, durable construction Rubber gates for easy, tapeless gel casting

  • …mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs. Molded, durable construction Rubber gates for easy, tapeless gel casting

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.