Owl Separation Systems
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ EasyCast B1A mini gel and A2-OK multi gel electrophoresis system.
-
Gator™ Electrophoresis System
Owl Separation SystemsGator™ models A1 and A2 large gel systems Electrode placement ensures a uniform electric field and clear banding Durable acrylic construction Three point leveling ensures flat, even gels Leak-resistant gasketed end gates Durable, acrylic gel casting system has an UV transmissible gel…
-
Owl® Spacer Placer
Owl Separation SystemsThe Owl® spacer placer is used in gel assembly for spacers alignment. It is suitable for use with JGC-4 gel casting system.
-
Large Gel System Replacement End Gates
Owl Separation SystemsThe Thermo Scientific large gel system replacement end gates are suitable for use with Owl™ A2 and A5 large gel electrophoresis system. They are suitable for use in research facilities and chemical laboratories.
-
Owl® Side Clamp
Owl Separation SystemsReplace blocking plate, buffer chambers, lid or side clamps with Thermo Scientific™ Owl™ P8DS Gel System Replacement Parts; for use with the Owl™ P8DS Gel System.
-
Emperor Penguin Dual Gel Electrophoresis Systems
Owl Separation SystemsDurable acrylic fabrication for years of service Safety interlocking lid with attached three-foot long power supply leads The Penguin P8DS system provides fast run times and easy operation for excellent results. The Penguin P9DS system is the optimal size for two-dimensional…
-
Gasketed UVT Gel Tray
Owl Separation SystemsReplacement part for for Thermo Scientific™ Owl™, B2 and B3 EasyCast™ Mini Gel Horizontal Electrophoresis Systems. EasyCast™ gasketed UVT gel tray Length (Metric): 14cm Width (Metric): 12cm
-
Owl™ Vertical Electrophoresis System Apparatus
Owl Separation SystemsThe Owl Separation Systems apparatus measuring 6.7 Inch x 5.1 Inch x 5.5 Inch, is suitable for use with vertical electrophoresis system.
-
T-Rex Aluminum Backed Nucleic Acid Sequencers
Owl Separation SystemsEven heat distribution for smile-free results A floating anodized aluminum plate delivers uniform heat distribution throughout the entire gel run and provides even banding patterns across all lanes, shortens pre-run times and reduces the risk of glass breakage during operation. Integral side…
-
Owl® Buffer Drain Bottle
Owl Separation SystemsThe Owl Separation Systems buffer drain bottle is suitable for use with S3S aluminum-backed sequencer system. It is used to store and dispose buffer solution. Achieve optimal manual sequencing with Thermo Scientific™ Owl™ S3S Aluminum-Backed Sequencer System Replacement Parts, for use with the…
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is suitable for use with S4S and S3S T-Rex™ sequencing vertical systems and SGC-1 and SGC-2 sequencing gel casting systems.
-
Gasketed UVT Gel Tray
Owl Separation SystemsDesigned for use with the Owl® B1 EasyCast™ Mini Gel Electrophoresis System. Gasketed EasyCast UVT gel tray, includes gaskets
-
Owl™ UVT Gel Tray
Owl Separation SystemsThe Owl® UVT gel tray measuring 14 cm x 23 cm, is suitable for use with Owl™ D3 series horizontal electrophoresis system.
-
Buffer Puffer Electrophoresis System
Owl Separation SystemsSelf-recirculating system provides uniform, high resolution of RNA samples during long runs without pumps, tubes or stir bars Safe Includes EasyCast™ tray Produces sharper bands Prevents formation of pH and ionic gradients No assembly required Bubbles from the…
-
Owl® Super Safe Lid
Owl Separation SystemsThe Owl Separation Systems super safe lid is suitable for use with P10DS dual gel electrophoresis system. Keep your dual gel system running with Thermo Scientific™ Owl™ P10DS Dual Gel System Replacement Parts Parts are for use with the Owl™ P10DS Dual Gel System, an optimal device for a large…
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ D3 series horizontal electrophoresis system.
-
Centipede Wide Format System 23.5 X 14 cm
Owl Separation SystemsOwl D3-14 Wide Gel System incorporates Owl’s EasyCast design with an external caster. The UVT gel tray is fitted with a gasket which allows the tray to fit snugly into the external gel caster to provide a leakproof seal without tape. Sample loading is greatly enhanced using micro well pipette…
-
Owl™ Multiple Gradient Gel Caster
Owl Separation SystemsThe Owl Separation Systems multiple gradient gel caster finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal.
-
Owl® Spacer Placer
Owl Separation SystemsThe Owl® spacer placer is used in gel assembly for spacers alignment. It is suitable for use with JGC-3 gel casting system.
-
The Stretch Otter™ Sequencing Gel Caster
Owl Separation SystemsOwl SGC-2 Sequencing Gel Caster uses an innovative method for casting that is so simple you can cast bubble free gels in less than 3 minutes. A horizontal plate sliding procedure, capillary action drawing gel between plates, and surface tension, keeps the gel from leaking. No taping or special…
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl® P9DS-1, P9DS-2 and P9DS-3 dual gel vertical electrophoresis system.
-
Owl D2 Wide Gel System
Owl Separation SystemsThis system incorporates Owl°s EasyCast design with an external caster. The UVT gel tray is fitted with a gasket which allows the tray to fit snugly into the external gel caster to provide a leakproof seal without tape. Sample loading is greatly enhanced using micro well pipette format combs…
-
Bandit Tank Electroblotters
Owl Separation SystemsFast and efficient transfer of high molecular weight proteins Faster blotting without heat build-up SuperSafe™ interlocking lid Corrosion-resistant electrodes Deeply seated electrodes to prevent damage One-way only cassette entry To ensure uniform temperature, a magnetic stir bar is…
-
Electrophoresis System Wall Comb
Owl Separation SystemsEliminate comb assembly with Fisherbrand™ D3-14, A3-1 and A6 Wide-Gel Electrophoresis System Combs. These microwell and wall combs are heavy-duty, one-piece units for use with the D3-14, A3-1 and A6 wide gel electrophoresis systems.
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ EasyCast B2 and B3 mini gel electrophoresis system.
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is mainly used to cast gradient gels. It is suitable for use with P81, P82, P8DS vertical electrophoresis systems and JGC-4 and P7-CST gel casting systems. 2 sides,1 bottom Cast one to five gels simultaneously with the Thermo Scientific™ Owl™ P7-CST Multiple Gradient Gel…
-
Owl® External Caster
Owl Separation SystemsThe Owl® external caster is suitable for use with Owl™ D3 series horizontal electrophoresis system. Choose from various Thermo Scientific™ Owl™ D3-14 System Replacement Parts, including UVT gel tray, gaskets and external caster. For use with the Owl D3-14 System
-
Blank Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Owl® Side Clamp
Owl Separation SystemsThe Owl® side clamp is suitable for use with Owl™ P10DS dual gel electrophoresis system.
-
Notched Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Blank Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Owl® Side Clamp
Owl Separation SystemsThe Owl® side clamp is suitable for use with Owl™ S3S aluminum-backed sequencer system. Achieve optimal manual sequencing with Thermo Scientific™ Owl™ S3S Aluminum-Backed Sequencer System Replacement Parts, for use with the Owl™ S3S Aluminum-Backed Sequencer System