Cover Glass 1.5

Cover slips are manufactured from Corning 0211 Float Glass, #1.5 thickness (0.16 to 0.19mm). Sold in packages of 1oz.

Our Thomas® microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in two thicknesses: No. 1: 0.14mm No. 1.5: 0.175mm Pack and Case: 1/Pk = 1 ounce …

…of large rectangles Practically noncorrodible, corrosion under conditions other than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 1 1/2- 0.16 to…

…with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Can withstand temperatures from -55° to 120°C Resistant to soiling and to acids,…

Our microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in 3 thicknesses No. 1 : 0.14mm No. 1.5 : 0.175mm No 2 : 0.21mm

…large rectangles Practically noncorrodible, corrosion under conditions other than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 11/2- 0.16 to 0.19…

…of large rectangles Practically noncorrodible, corrosion under conditions other than tropical is highly improbable Thickness of Red Label Cover Glasses is controlled within the following tolerances: No. 0 - 0.085 to 0.13 mm thick, No. 1 - 0.13 to 0.17 mm thick, No. 11/2- 0.16 to 0.19…

Kemtech America Cover Glass in White Glass. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

Sterile Leak-tested Handle for aseptic manipulations Biocompatible acrylic adhesive #1.5 Borosilicate Coverglass is configured for 1, 2, 4 and 8 well unit. Non-removable media chamber is made of proprietary cell culture grade polystyrene. Coverglass thickness is between 0.16 and…

Kemtech America Cover Glass in Boro 3.3. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

Use as a filtration aid when extracting samples with a high particulate content using Empore disks. Approximately 40grams to cover a 90 mm disk 1cm deep. Approximately 15grams to cover a 47mm disk 1cm deep.

High quality coverslips glasses are essential for microscopy and imaging. Cover glasses with diameters of 5 mm and 8 mm are now available from stock in convenient packages of 100.

…mm depth when a cover glass is placed in position Two parallel lines 1.382 mm apart traverse one side of the raised section for adjustment of field to 1.5 mm 2 circle AOAC method approved Supplied with one Cover Glass, Thomas number 3298N20 and one 3298N30 Cover Glass; both are 28 x…

…is the only culture dish that provides heat to the contents of the dish without heating the stage of the microscope. It uses number 1.5 thickness cover glass bottomed dishes that have an electrically conductive, optically transparent coating of ITO on the underside. The coating is electrically…

…is a registered trademark of Sigma-Aldrich Co. LLC Other Notes: Specifications: •The OMI-2 tube holder is 10 in. (25.4 cm) long with a diameter of 1.5 in. (3.8 cm) and 1/8 in. fittings. •The OMI-4 tube holder is 16 in. (40.6 cm) long with a diameter of 1.5 in. (3.8 cm) and 1/8 in. fittings.

…sections are normally mounted using a suitable mounting agent and covered with a cover glass. One of the most important parameters of mounting agents is the refractive index (nD) which should be around 1.5, the refractive index of glass. Aquatex, an aqueous mounting media, should be used especially…

…ranges The Savant SpeedVac SPD1030 System is designed for medium capacity (i.e., 120 x 1.5 mL tubes and other formats) while the Savant SpeedVac SPD2030 System accommodates higher capacity (i.e., 200 x 1.5 mL tubes and other formats). A variety of rotors are available for both systems to support…

…ranges The Savant SpeedVac SPD1030 System is designed for medium capacity (i.e., 120 x 1.5 mL tubes and other formats) while the Savant SpeedVac SPD2030 System accommodates higher capacity (i.e., 200 x 1.5 mL tubes and other formats). A variety of rotors are available for both systems to support…

…polyethylene shell; 1/4" thick laminated safety glass viewing window with powder-coated steel frame and neoprene gasket; interior-mounted anti-static ionizer fan; balance vibration isolator consisting of a marble slab, isolator pads and stainless steel cover; space-saving inner and outer transfer…

…Pipettes comply with ASTM E-969-02. Available in sizes ranging from 1mL to 100mL. 1.5mL and 2.5mL options are not covered by ASTM standards. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers…

…when stable vacuum is formed/maintained and when there is an internal explosion.     Polycarbonate safety cover provided in case of toughened glass breakage.     36 events is recorded in case of door open, error, and etc.     Top-rated…

…Note, there is a simple process of growing cells on the basal surface of the membrane so that the cells can be imaged directly through the cover glass bottomed dish. Brain Slice Adapter – 1178J63 The Bioptechs Brain Slice adapter is an accessory designed for the observation of…

…vigorous mixing of up to twelve 1.5ml microtubes through a combination of vortexing and impact collision. This system is ideal for aggressive and rapid dissolution, resuspension or mixing of samples and is also convenient and effective for cell disruption in glass bead procedures 1220A00: New…