Buchi Rotary Evaporator

Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, EL MODEL.

Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, R210, R215 and RII MODELS.

Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, R114, R124 AND R144 MODELS.

Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, R/RE/R-110/R-111/R-120/R-121-RE-140.

Replacement flange compatible with Buchi condensers and rotary evaporator flasks.

Special S-40 size ball and sockets compatible with Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34 mm O.D. x 2.8mm wall tubing.

Replacement glass steam tube for Buchi rotary evaporators using the C or CR assemblies.

Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.

Double coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.

Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.

Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.

Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.

Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

Replacement borosilicate glass valve assemblies for model R220 rotary evaporators. Both code -07 receiving flask bottom drain assembly and code -05 distribution head valve assembly feature PTFE valve stems with Kalrez o-rings. All bushing are PTFE and supplied with CAPFE o-rings. No frozen joint…

Borosilicate glass connecting tubes for Model R220 rotary evaporator. These components match various connecting tubes for all the rotary evaporator glass sets. The tubes are used in the upper glass assemblies to connect the various condensers and expansion tanks.

Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

Replacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…

The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

Replacement glassware for Buchi rotary evaporators. Available plain or safety coated.

Replacement glassware for Buchi rotary evaporators. The C glassware set is the most popular and is available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 & -03 do not include plugs. Order separately 1 each 13295-08 and 1 each 13295-10.

Rotary evaporator vapor duct tubes. Precision machined to fit model R220 evaporators. Available in either borosilicate glass or 316 stainless steel.

Borosilicate glass, lower distribution heads for model R220 rotary evaporators. Heads have improved designs by utilizing Ace-Threds for connections. Available either safety coated or in plain versions. All caps included. Inner ball joint has a CAPFE o-ring. End #15 Ace-Thred connects to the 3978…

Borosilicate glass components for model R220 rotary evaporators. Traps are both inner and outer cold traps available either safety coated or plain. This improved version utilizes flat ground flanges on the inner and outer trap that is sealed together with a Duran quick- release clamp. Outer traps…

Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

…the Büchi® R-200/205 rotary evaporators. This adapter combines a vapor tube adapter and a bump trap. Trap has an extra coarse fritted disc sealed between the lower inner joint and the top flange. Adapters have a 50mm OD top flange with a tapered interior to fit the Büchi® sealing…

Borosilicate glass connecting tubes for side receiver assembly on R220 rotary evaporators. Include right and left branching pieces for both double and single receiving assemblies. Ace-Thred valves with Kalrez o-rings are a significant design improvement. Available in either plain glass or with…

Replacement vapor duct tube for Buchi rotary evaporators. The 45mm length fits V assemblies and the 160mm length fits A assemblies. End joints are available in [ST] 29/32, [ST] 24/40, or [ST] 29/42 inner. The middle joint is tooled to fit the specific rotary evaporator for which it was designed.…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

Replacement flask for Buchi rotary evaporators. Round bottom flasks with a 35/20 single neck and safety coating.