Autoclave

Indicator strip confirms sterilization Autoclavable to 160°C Indicator strip turns black after correct steam processing Suitable for sterilization of pathogenic material The bags have been developed to meet all various laboratory demands concerning capacity and…

Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens…

…imprinted with blue biohazard labeling designed for safe disposal. Constructed of 2.0-mil thick polypropylene, allowing for repeated autoclaving. Strong side seams for securely holding items. Front write-on panel. Autoclavable at 250°F (121°C). 4 inner packs of 50 bags, sold as a case of 200.

This adhesive tape is used to seal autoclave bags and pouches and changes color when the contents have passed through a sterilization cycle. Each roll is 165 feet (50m) long. 1181C23 is used when using autoclave sterilization (20 ft. at +121°C, 10 ft. at +125°C and 5 ft. at…

The Cement Autoclave provides an accelerated means of estimating delayed expansion of Portland cement caused by hydration of CaO, MgO, or both in accordance with procedures described in ASTM C151. In this operation, changes in length of test bars of cement are measured after being exposed to…

…a line of Autoclave Deodorizers that will remove unwanted odors from your facility by chemically absorbing odor causing molecules rather than masking them. Unlike similar products on the market, these are true deodorants. Instead of trying to overwhelm odors produced by the autoclave, the Argos…

Transparent Autoclave bags are made of two-millimeter-thick Polypropylene (PP) and are used for steam cleaning used petri dishes, membrane filters, cell culture flasks, pipettes, culture plates and other autoclavable products.

Heat resistant up to 450°F (232°C) Soft, pliable gloves are excellent for handling hot objects out of the autoclave or oven, as well as for other heat protection in the lab, school or industry Washable All cotton, terry cloth gloves replace hazardous asbestos gloves.…

Each printout documents: Temperature Pressure Elapsed drying and sterilization times Selected cycle Cycle number Real time and date In addition, a summary is printed at the end of each cycle. If an error or interruption occurs at any point during the…

The FDA approved, American Made Saniclave 102 is fashioned with a simple push button operation. The thermally protective polymer skin eliminates burn risk. Low water and under and over temperature alarms assure safety and effectiveness during operation. A corrosion resistant, stainless steel chamber…

Features One button operation Durable construction Safe burn free exterior Display: Digital time and/or temperature Safety: Over temperature alarm Rugged stainless steel chamber and cover Load type: Solid, non-lumened, unwrapped medical instrument

Self-sealing edges, need no additional closing devices Bags are constructed of paper Have a useable size of 10" x 2.5" x 1.5" for instruments.

Fitting any small to mid-size laboratory device, the Qualitix® single use pouches provide easy and effective wrapping of items requiring sterilization. Made with robust medical grade paper, the pouches tightly close with a self-sealing strip to maintain sterility. Content remains always visible…

…with primitive technology like our competitors. Meeting all requirements of the most stringent of autoclave standards, this American made sterilizer is one of the newest FDA listed autoclaves on the market! This unit is FDA approved. Also availible with a printer. Simple push-button…

The Superblast Autoclave range was specially developed and designed to meet requirements in grade A, B, C, and D clean rooms in sterile and non-sterile conditions.

Neutralize Autoclave Odors with a Choice of Four Fragrances Heat-released deodorant pads neutralize autoclave odors with one of four pleasant scents. Simply open foil pouch and place pad in bag prior to autoclaving Pads have a three year life span; will last longer if stored in a…

…waste is sterilized with the use of high temperature autoclave bags. Bags are ideal for processing hazardous materials up to 275°F (135°C). Imprinted with a biohazard symbol and an indicator which changes to “Autoclaved” when contents are successfully sterilized.

Printed diagonal stripes darken indicating a steam autoclave process is complete. Stripes darken after 5 minutes of exposure at 273°F (134°C) at steam pressure of 1.02 kg/cm 2 .

Micronova™ Lead-Free Autoclave Tape is an extremely effective, lead-free and latex-free indicator tape. It provides a method of positively confirming a complete sterilization cycle in both gravity discharge and vacuum autoclaves. The green indicator lines change to black when proper…

Heat and moisture from the autoclave release the contents of the capsule to overcome unpleasant smells generated from heating microbiological waste. One capsule per load absorbs offensive odors leaving the laboratory smelling fresh and clean. Comes in two fragrances - apple and lemon.

…steam sterilization indicating polypropylene label with a preprinted header that displays ""STERILIZED"" when exposed to autoclave conditions. Ideal for use in sample tracking, inventory management, general tracking, and identification of lab materials that require…

…temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard autoclave…

Lead-free Steam Indicator Tape is compliant to ISO 11140-1:2014 Type 1. The chemical indicator lines will show a visual color change from beige to dark brown/black when proper levels of moisture and temperature have been achieved.

Enjoy guaranteed maximum safety for all, including wearers of prescription glasses.  Polycarbonate Safety Glasses, Over The Glasses (OTG), also features a highly wrap-around and an attractive style.

…of various containers and surfaces for autoclaving and dry heat sterilization. Temperature range from -60°C to +150°C (from -76°F to + 300°F). The labels can be applied to metal, plastic and glass surfaces and withstand autoclave sterilization cycles at 132°C (270°F)…

For use with Tuttnauer Autoclave Sterilizer.

…gelatin capsules contain concentrated formulation to neutralize, not simply mask, odors caused by autoclaving organic and inorganic samples or waste Capsules dissolve in hot water to vaporize or can be placed in biohazard bag One capsule deodorizes up to 7 cubic feet autoclave capacity

…use. Thermco's Maximum Registering Autoclave Thermometers are a simple and inexpensive method for autoclave validation. FEATURES: Thermometers Indicate Highest Temperature Attained During Use Verification For Autoclaves and Sterilizers Thermometer Must be Shaken Down…

High quality tape specially designed for steam autoclave conditions. Indicator tapes provide immediate identi cation to verify exposure to sterilization process. Easy to read color change indicator 60 yards rolls Available in multiple widths Designed for use at 250°F (121°C)…