Aspirator

Strong plastic aspirator for vacuum filtration and other lab applications. Designed to prevent any flooding, back-flow, or turbulence. Includes 5.9” (15 cm) hose. The top nozzle has an outer diameter of 1.5 cm. The side nozzle can accommodate hoses from 0.5 cm to 1.0 cm inner diameter.

These lightweight, autoclavable aspirator bottles are made from polypropylene and can be used for dispensing distilled water and other laboratory solutions. The leak-proof spigot screwed to the bottle requires only a half turn to open or close. Polyethylene cap and stopcock should be removed before…

PYREX® borosilicate glass Useful as a delivery/storage container for solutions Autoclavable Features a tubular sidearm outlet to facilitate attachment of flexible tubing. 250 mL bottles take size 2 rubber stoppers; 500 mL bottles take size 4; 1,000 mL and 2,000 mL bottles take size 6;…

The Costar® Aspirator is a device using vacuum to safely and aseptically dispose of supernatant from a variety of laboratory vessels. Includes a hand piece to which disposable pipet tips are attached during use Grommet for accessory attachment and single-channel adapter for disposable…

With white enamel marking spot Glass conforms to ASTM E438, Type 1, Class A Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8: I.D. tubing. Kimax glass hose connection outlet is fused to the bottle. 250 mL bottle takes size 2 rubber stopper; 500 mL…

These 500mL PYREX® aspirator bottles have a tubular sidearm outlet (10mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 4 rubber…

The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of…

…Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the attached…

Humboldt Aspirator Filter Pumps offer excellent performance for vacuum filtrations under both high and low water pressure conditions. The pumps feature a ball-type, positive-action valve in the suction tube which prevents water backflow if the pressure is reduced.

Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

…new Heavy Duty Vacuum Bottles have thick walls to withstand the forces of repeated vacuum applications in the laboratory. Designed for liquid aspiration and transfer operations, the bottles come complete with a polypropylene (PP) cap and TPE gasket for leakproof sealing. The polypropylene bottles…

…fume hood, or laminar flow hood Quickly and conveniently aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste chemicals, cell washing solutions, and more Ideal…

The Vacu/Trol Water-Aspirator efficiently generates full vacuum with standard laboratory faucets (10 liters of air to Length: 24.15 cm (9.51 in.); Weight: 315 g

Sterile aspirating pipettes are completely transparent and designed for the transfer and mixing of liquids. They are also used in a wide variety of applications such as vacuum or pipettor aspirating procedures. Material: Polystyrene (PS) Transparent, no graduation marks Non-plugged …

Fits faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per…

Complete with screw connection cap, silicone seal and stopcock with PTFE spindle. Dosing of liquids is possible via a stopcock.

KIMAX glass hose connection outlet is fused to the bottle. Accepts 5/16" I.D. flexible tubing With white enamel marking spot Glass conforms to ASTM E438, Type I, Class A

Chemically and thermally resistant PYREXplus® borosilicate glass bottles offer good optical clarity and durability PVC coating helps contain glass and contents should breakage occur Autoclavable or microwaveable to 121°C (250°F) Resistant to thermal shock Bottle…

A Complete Set of Tools for Aspiration Rapidly remove supernatant from a variety of cell culture or multi-well plates and dishes! This ergonomic, hand-held aspirator can be used with Pasteur pipettes, plastic aspiration pipettes or a variety of adapters for specific applications. A…

The FTA-2i aspirator with 2L trap flask is designed for removal of alcohol, buffer and liquid from reaction vessels eg during DNA / RNA purification and other macromolecule re-precipitation techniques. All in one system with integrated pump 2L autoclavable polypropylene trap flask Fitted…

High-density polyethylene aspirator pump operates on water pressure above 11psi (7584 N/m2). Integral check valve resists corrosive filtrates and fumes Quick-disconnect hose fitting accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Male thread faucet connection is 9.5mm (3/8")…

The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

The QuikSip™ is a convenient bottletop aspirator that removes supernatants, cell culture media, and other liquids from dishes, flasks, culture bottles, centrifugation tubes, multiwell plates, and more. It is small, portable, and doesn’t require an external vacuum or power source. No…

…Bottles from Globe Scientific have thick walls to withstand the forces of repeated vacuum applications in the laboratory. Designed for liquid aspiration and transfer operations, the bottles come complete with a Polypropylene (PP) cap and TPE gasket for leakproof sealing. The polypropylene bottles…

Our PVC deluxe vacuum pressure bulb is ideal for gas aspirating duties. Length: 111mm without valves; diameter 57mm.

This compact, portable system is ideal for vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes and is available with the original strength or HiFlow pump. Self-contained system with 1.0 gallon bottle, tubing and vacuum pump is…

These PYREX® aspirator bottles have a tubular sidearm outlet (15mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 12 rubber stoppers. They…

This is an 8-channel adapter that fits on the Costar® Aspirator (No. 4930) so that it can be used to remove media and solutions from 8 wells simultaneously on a 96 well plate.

These food grade carboys are designed for lifetime service. They feature heavy-duty walls but retain translucency. The carboys can be used in sub-zero temperatures. The supplied 3/4" BSP spigot mates with a 12mm deep thread in the aspirator for total leak-proof performance.

A safer alternative to glass Pasteur pipets Sterile Ungraduated Without plug Non-pyrogenic Disposable polystyrene pipets for automated aspirations or non-critical bulb-type pipetting. Individually packaged in thermoformed paper/plastic wrap to ensure contamination-resistant presentation.

CELLTREAT offers disposable Aspirating Pipets in 1ml, 2ml and 5ml sizes. Aspirating pipets are supplied without graduations or plugs and are available individually wrapped or bulk-packed. CELLTREAT Scientific Products include a comprehensive "Quality Certificate" with every case of…