Magnifying Glass with a glass lens, metal frame, and bakelite handle.

For performing experiments in conservation, velocity, elastic collision, acceleration and momentum. The set contains two high impact plastic cars with snap in wheels and two spring steel bumpers with rubber stopper assemblies. Each car has a recession for holding additional weight. The approximate…

This simple but precise launcher projects 16 mm steel balls at ranges suitable for use on the bench top or from the bench to the floor. A protractor and plumb line make it easy to set any required launch angle from 45° downwards to straight up. Three different spring tensions give three…

This premium lab set is the perfect thing to get a home lab or classroom going. It has all the components you would need to start a basic chemistry lab. - All the components needed to get a lab going - Premium, research grade components Includes: (1) base, (1) rod, (1) beaker tong,…

This premium set includes a stand, rod clamp and ring, all in one packages - eliminating the need to piece together a system for your classroom or lag. Everything is in one box. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Made from…

Equilateral prisms, made from high quality clear glass sheet with highly polished surfaces.

Prism Smooth Polished Glass Surface Optically Clear Individually Boxed

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

Use this simple apparatus to measure relative humidity. Includes two plastic-backed Celsius thermometers, one for dry bulb measurements and the other for wet bulb measurements. The thermometers mount on a wooden handle so they can be spun to obtain tem

This clear plastic 12" ruler is scaled in 1/16" increments on one side and MM on the other.

Hardwood half meter stick for use with our Demonstration Balance Support or other laboratory measurement activities.

The kit includes the pieces to build a simple balance demonstration. Consists of a knife edge clamp, meter stick, metal support and cast iron base. The knife edge clamp is often used on a balance demonstration to hold a meter stick or for suspending a weight from a meter stick. Made from nickel…

Made from clear acrylic. One plane surface is frosted.

Student optical bench contains sufficient equipment for high school physics applications. Set includes the following: 1 Meter Stick, 1 Screen support, 2 Lens Supports for 38mm and 75mm lenses/mirrors, 5 Board screens measuring 10 x 12.5cm with a millimeter scale on both sides, 1 Marker and object,…

All plastic construction. Dual scale range is 6" or 150mm. Readability is 1/128" or 0.05mm.

A natural rock that contains traces of iron ore with natural magnetic properties.

Tuning forks made from alluminum alloy. The frequency and leter scale is stamped on each fork.

Optical Bench Student Demo A simple form Optical Bench that provides an accurate demonstrations of basic optics principles. It uses a metric meter stick as the support bench. The complete system includes: meter stick 100cm length, 1 object market, 1 object screen, 1 screen support, 1 pair of…

Glass with ground edges - Double Convex

These spring scales feature a clear plastic tube design, and are color-coded. A zero adjustment screw is provided at the top. Overall length approx.7".

Rectangular glass block with two frosted sides, 114mm x 63mm x 19mm.

This ingenious device offers a practical and economical solution for light measurements in a variety of learning situations. Whether measuring environmental light or quantifying an optical experiment, this compact luxmeter meets the need. For most uses, the autoranging feature makes this a…

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

This simple tool measures wind speed and direction. The wind speed range is 0 to 17 meters per second (+/-10%). The direction indicator is divided into 16 compass points. A built-in compass is provided. Shipping weight: 4.4 Oz., dimensions: 9" x 6" x 6".

Single folding magnifier in an aluminum case. One lens, 25mm diameter, 10x magnification

The set contains 6 glass lenses: one each of double convex, plano-convex, concavo-convex, double concave, plano-concave, and convexo-concave. Includes a reusable cardboard storage box.

The Electronics System 1 Physics Kit comes with 18 components, including a Circuit Board, and all the Diodes and transistors one needs to investigate core concepts in introductory semiconductor electronics. With this kit students can explore common experiments such as The Half-Wave Rectifier,…

Contains Hollow Friction Rod, Solid Friction Rod, 1/2 Ground Friction Rod, Ebonite Rod, Wool Pad, Silk Pad, Faux Fur Pad, 3-Balloons and 10 feet of String. Instructions included.

Clear plastic magnifier is 110mm (4.50") in length and features dual lenses of 3x and 6x magnification. 3x lens is 50mm in diameter and 6x lens is 20mm in diameter. Handy molded plastic magnifier has 2x, 6x, and 8x magnification lenses.

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.