UN2031
-
Nitric Acid, 70 Percent, Electronic/Cleanroom Grade
Spectrum ChemicalGrade: Electronic/Cleanroom Grade CAS No.: 7697-37-2 UN No.: UN2031 Class: 8 (5.1) Pkg. Group: PG II
-
LabChem 70% w/w ACS Nitric Acid
LabchemThe LabChem 70% w/w ACS nitric acid in liquid form, is exothermically soluble in water and ether. Application: For Chemical Raw Material, Metal Surface Treatment, Printing Industry: etch Solution
-
Nitric Acid, AR Select (ACS)
Avantor - Macron Fine Chemicals™For Trace Element Analysis Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2
-
EMSURE® Nitric Acid 65% For Analysis
MilliporeSigmaUN No.: 2031 pH: (H2O, 20°C) strongly acid Solubility: (20°C) soluble Melting Point: -32°C Boiling Point: 121°C (1013 hPa) Vapor Pressure: 9.4 hPa (20°C) Density: 1.39 g/cm3 (20°C) Ignition Point: (H2O, 20°C) strongly acid
-
Nitric Acid, 65% (w/w) Huey, Volumetric
Reagents®Concentration: 65% w/w Composition: Nitric Acid 65.25%, Water 34.75% Boiling Point: 120.5 °C Density: 1.45 Color: Colorless to light yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN2031, NITRIC ACID,…
-
-
EMSURE® Nitric Acid 69% For Analysis
MilliporeSigmaUN No.: 2031 pH: Solubility: (20°C) soluble Melting Point: -41°C Boiling Point: 122°C (1013 hPa) Vapor Pressure: 9.4 hPa (20°C) Density: 1.41 g/cm3 (20°C) Ignition Point:
-
Nitric Acid, 50% (v/v), Volumetric
Reagents®Concentration: 50% v/v Composition: Water 57.97%, Nitric Acid 42.03% Boiling Point: Approximately 100°C Density: 1.26 Melting Point: Approximately 0°C Color: Colorless to light yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034 (ISO Guide 34). This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST or BAM.Certified content incl. uncertainty and expiry date are given on…
-
Nitric Acid, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2 Synonym(s): N/A
-
Nitric Acid Redistilled
GFS ChemicalsHNO3 F.W.: 63.01 NFPA#: 3-0-3 Specific Gravity: 1.408 DOT: 8/5.1/II Descriptions: Trace metal grade. Low ppb metal impurities. Note:Results reported at time of bottling in glass. Thelevels of Al, B, Ca, K, Mg, Mn, Na, and Si will increase over time.
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST.Certified content incl. uncertainty and expiry date are given on the label. Information…
-
UN No.: 2031 pH: (H2O, 20°C) Density: 1.031 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Aluminum (Al) standard solution NIST(R) SRM(R) 3101a
MilliporeSigmaThis Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of aluminum. A unit of SRM 3101a consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known…
-
-
Palladium Matrix Modifier For Graphite Furnace Aas
MilliporeSigmaUN No.: 2031 pH: (H2O, 25°C) acidic Solubility: (20°C) soluble Density: 1.11 g/cm3 (20°C) Ignition Point: (H2O, 25°C) acidic
-
Ricca 30% (v/v) Nitric Acid
Ricca ChemicalThe Ricca Chemicals 30% (v/v) nitric acid is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034). This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST.Certified content incl. uncertainty and expiry date are given on the certificate.…
-
Nitric acid, ACS, fuming, 90%
Thermo Scientific ChemicalsFormula: HNO3 Formula weight: 63.01 Purity: 90% CAS Number: 7697-37-2 UN Number: UN2031 Hazard Class: 8 Packing Group: I Harmonized Tariff Code: 2808.00 Hazard Statements: H272-H330-H314-H318 May intensify fire; oxidizer. Fatal if inhaled. Causes severe skin burns and eye…
-
Nitrical Decalcifier
StatLabSafe and gentle standard AFIP formulation. Made from semiconductor grade acid and highly purified reagent grade water. Excellent decalcifier for busy laboratories where time is a critical element. Very mild solution that works rapidly with beautiful results. Can be used for all types of specimens…
-
Nitric acid, ACS reagent, 70%
Honeywell Research ChemicalsNitric acid (HNO3) is a highly corrosive mineral acid. It is usually utilized for abstracting transition metal catalyst from single-walled carbon nanotubes (SWNTs) in order to purify them. The effect of nitric acid on the oxidation of multiwalled carbon nanotubes (MWCNTs) has been investigated by…
-
Nitric Acid, Fuming, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2
-
Nitric acid, 65-70%, 99.999% trace metals basis
BeanTown ChemicalCAS: 7697-37-2 EC No: 231-714-2 MDL No: MFCD00011349 RTECS: QU5775000 UN No: UN2031; Haz Class: 8 (5.1); Packing Group: II Liquid Molecular Formula: HNO3 MW: 63.01 Boiling Point: 120.5° Density (g/mL): 1.413
-
Ricca Ammonium Molybdate-Vanadate Solution
Ricca ChemicalThe Ricca Chemical ammonium molybdate-vanadate solution is composed of 78.28% water, 17.99% nitric acid, 3.64% ammonium molybdate tetrahydrate and 0.09% ammonium metavanadate. It is suitable for use in phosphorus determination. It can be stored at a temperature of 15 to 30 degree C. Application:…
-
Nitric Acid, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2
-
VeriSpec™ ICP-MS Internal Standard 8
Ricca Chemical10 ppm: Li 6+ , Sc, Ge, Rh, In, Tb, Lu, Bi Matrix: 10% HNO3 /tr HCl Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
UN No.: 2031 pH: Density: 1.093 g/cm3 (20°C) Ignition Point:
-
Nitric Acid, Superior (ACS)
GFS ChemicalsHNO3 CAS#: 7697-37-2 F.W.: 63.01 Metals analysis reported on certificate in ppm.
-
Nitric acid, 65-70%, 99.999% (metals basis)
Thermo Scientific ChemicalsFormula: HNO3 Formula weight: 63.01 Purity: 99.999% (metals basis) CAS Number: 7697-37-2 UN Number: UN2031 Hazard Class: 8 Packing Group: II Harmonized Tariff Code: 2808.00 Hazard Statements: H314-H272 Causes severe skin burns and eye damage. May intensify fire; oxidizer.…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034 (ISO Guide 34). This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST or BAM.Certified content incl. uncertainty and expiry date are given on…
-
Nitric acid, 68.0-70.0%, ACS
BeanTown ChemicalCAS: 7697-37-2 EC No: 231-714-2 MDL No: MFCD00011349 RTECS: QU5775000 UN No: UN2031; Haz Class: 8 (5.1); Packing Group: II Liquid Molecular Formula: HNO3 MW: 63.01 Boiling Point: 120.5° Density (g/mL): 1.413
-
Nitric Acid, 30% (w/w), Standardized
Reagents®Concentration: 30% w/w Composition: Water 68.24%, Nitric Acid 31.76% Boiling Point: Approximately 100°C Density: 1.18 Melting Point: Approximately 0°C Color: Colorless to light yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …