UN1789, MilliporeSigma
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST. Certified content incl. uncertainty and expiry date are given on the label. Information…
-
Hydrochloric acid, ACS reagent, 37%
MilliporeSigmaMolecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Purity: 36.5-38.0% (ACS specification); 37% Density: 1.2 g/mL at 25 C (lit.) Application: Chlorine source for safer, greener chlorination of aromatic…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034 (ISO Guide 34). This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST or BAM.Certified content incl. uncertainty and expiry date are given on…
-
The gel is formed by stable thioether bonds between maleimide groups of PVA (FAST-PVA) and thiol groups on PEG non cell-degradable crosslinker. Malemide-functionalized PVA is specifically used to decrease the time for gel formation. The PVA polymer does not have cell attachment sites, but it can be…
-
Trypsin is a major proteolytic enzyme, synthesized as a preproenzyme by pancreas and is stored as proenzyme trypsinogen in secretory granules. Trypsin belongs to the family of serine proteases that are characterized by the catalytic triad His57, Asp102 and Ser195. Trypsin is routinely used in…
-
-
OmniTrace® Hydrochloric Acid 34-37%
MilliporeSigmaFormula: HCl in water Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): Muriatic Acid
-
-
The gel is formed by stable thioether bonds between maleimide groups of dextran (FAST-DEXTRAN) and thiol groups on PEG non cell-degradable crosslinker. Maleimide-functionalized dextran is specifically used to decrease the time for gel formation. The dextran polymer does not have cell attachment…
-
Hydrochloric acid solution 32 wt. % in H2O, FCC
MilliporeSigmaSynonyms: Muriatic acid; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Purity: 20 (degrees baume) Density: 1.161 g/mL at 25 C Other Notes: Download our Flavors and Fragrances Catalog to…
-
Hydrochloric Acid 32% For Analysis EMSURE®
MilliporeSigmaUN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -40°C Boiling Point: 83 - 90°C Vapor Pressure: 21.3 hPa (20°C) Density: 1.16 g/cm3 (20°C)
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST. Certified content incl. uncertainty and expiry date are given on the label. Information…
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.02 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
Declere(R)
MilliporeSigmaDeclere may be used whenever immunohistochemistry staining is performed on formalin-fixed, paraffin-embedded tissue sections. Using this product encourages standardization of the pretreatment procedure, thereby producing more consistent, more reliable results. Storage: room temp Legal…
-
GR ACS Hydrochloric Acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Muriatic Acid, 23 deg. Be; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Application: Meets ACS Specifications, Meets Reagent Specifications…
-
The gel is formed by stable thioether bonds between maleimide groups of PVA (FAST-PVA) and thiol groups on CD cell-degradable crosslinker. Malemide-functionalized PVA is specifically used to decrease the time for gel formation. The PVA polymer does not have cell attachment sites, but it can be…
-
TrueGel3D Buffer pH 5.5 600 mul solution, 10X concentrated
MilliporeSigmaTrueGel3D buffer pH 5.5 is a component of the TrueGel3D Hydrogel system. The TrueGel3D buffer with pH 5.5 is recommended for fast gelling hydrogels, because the acidic pH (lower pH) slows down the formation of a gel allowing homogenous mixing of polymer and crosslinker before it solidify. However,…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST.Certified content incl. uncertainty and expiry date are given on the certificate.…
-
Acidity certified reference material
MilliporeSigmaThis Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis. Other Notes: Values of analytes vary lot to lot. Some lots may not contain all analytes.
-
UN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -28°C Boiling Point: 45°C Vapor Pressure: 190 hPa (20°C) Density: 1.19 g/cm3 (20°C)
-
Acidity - WP proficiency testing material is produced in accordance with ISO/IEC 17043:2010. Also referred to as non-Potable water or Water Pollution sample, this product is produced according to TNI requirements. However, please note, this sample may include non-TNI analytes as well. The higher…
-
Suprapur® Hydrochloric Acid 30%
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Purity: 30% Melting Point: -50 C Density: 1.15 g/cm3 at 20 C …
-
OmniTrace Ultra™ Hydrochloric Acid
MilliporeSigmaReagent Grade Formula: NaOH in water Formula Weight: 40.00
-
Recombinant protein fragment of Human MORN1 with N-terminal His6ABP (ABP = Albumin Binding Protein derived from Streptococcal Protein G) fusion tag. Synonyms: FLJ13941 Purity: >80% (SDS-PAGE) Storage: -20C Application: Suitable as a blocking agent using corresponding antibodies. …
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.03 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
Rhodium (Rh) standard solution NIST(R) SRM(R) 3144
MilliporeSigmaSRM 3144_cert SRM 3144 _SDS Legal Information: SRM is a registered trademark of National Institute of Standards and Technology
-
Synonyms: Hydrochloric acid; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.19 g/cm3 at 20 C; 1.2 g/mL at 25 C (lit.) Legal Information: EMSURE is a registered trademark of…
-
Hydrochloric Acid 32% Extra Pure
MilliporeSigmaUN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -40°C Boiling Point: 83 - 90°C Vapor Pressure: 21.3 hPa (20°C) Density: 1.16 g/cm3 (20°C)
-
TrueGel3D Polymer Modifed for slow gelling (SLO-PVA)
MilliporeSigmaPVA polymers are functionalized with thiol-reactive groups, which react at a slower rate with thiol groups of crosslinkers (CD/PEG crosslinkers) to form stable hydrogels. The slow gelation kinetics allows enough time to conveniently manipulate the solution before the onset of homogenous gel…
-
Platinum Standard for ICP
MilliporeSigmaTraceCERT ® , 1000 mg/L Pt in hydrochloric acid RIDADR: UN 1789 8 / PGIII
-
The gel is formed by stable thioether bonds between maleimide groups of dextran (FAST-DEXTRAN) and thiol groups on CD cell-degradable crosslinker. Malemide-functionalized dextran is specifically used to decrease the time for gel formation. The dextran polymer does not have cell attachment sites,…
-
Pt-Co/Hazen/APHA Colour Reference Standard
MilliporeSigmaASTM D 1209 (ASTM colour 30) RIDADR: UN 1789 8 / PGIII