Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with seal Phenol / Chloroform resistant DNase, RNase and pyrogen free

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

Ideal for high-speed centrifugation of aggressive chemicals. Excellent for chloroform and phenol extractions. Resists any acid, base or solvent. Autoclavable tubes withstand temperatures from -100°C to +150°C. For use in refrigerated and non-refrigerated centrifuges up to 50,000 x g. Before…

5mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15mL tubes. Designed to fit the same rotors as our 15mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes. The interior surfaces are ultra-smooth with low retention…

Boil-proof cap Withstand 28,000 x g Easy to open, easy to close Double, high pressure locking ring RNase, DNase and pyrogen free Unsurpassed clarity Frosted writing surface and graduations Ultra smooth interior-low liquid retention …

50 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport.  …

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free

Polycarbonate open-top tubes have outstanding mechanical strength. Excellent for whole cell separations. For use up to 6,000 x g in refrigerated or non-refrigerated centrifuges. Translucent polypropylene copolymer has excellent chemical resistance. For low-speed centrifugation up to 6,000 x g. Both…

Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

50 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport.  …

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

KIMAX tube with a long taper. Calibrated "to contain". Used to determine the bottom sediment and water in petroleum. Made in accordance with the former specifications of the American Petroleum Institute. Scale, legend and marking spot are durable white ceramic enamel.

Oak Ridge style high speed polypropylene tubes are round bottom and autoclavable Economical and leak-proof for refrigerated or standard centrifugation Uniform wall thickness Polypropylene screw caps 80% of total capacity must be filled for proper performance Maximum RCF is 50,000g …

SuperClear® tubes offer you a standard of performance not available from other brands of centrifuge tubes. These tubes are made from a unique medical grade resin that is far more durable than commodity grade resins used in most other brands of tubes. This high quality resin makes it possible…

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. With sealing cap closure option. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity for proper performance. Polypropylene screw…

This 50mL PYREX® tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston City Hospital, for determinations involving multiple calibrations and for carrying out digestions. Graduated at 12.5, 25, 35 and 50mL, and supplied with a durable, white enamel marking spot.

Uniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.

Tubes: made of strong, highly transparent medical grade polypropylene Flat-top caps: made of medical grade polyethylene Plug-seal screw on caps: made of medical grade polypropylene 15ml and 50ml conical tubes available; large white writing area for easy marking Double threaded design…

Globe’s clinical centrifuge tubes are molded from polypropylene (PP) and feature flat-top, leak resistant blue caps. The tubes are printed with black graduation marks and have a large white writing area. Sterile tubes have attached blue screwcap Black printed graduations White printed…

Translucent polypropylene copolymer provides greater chemical resistance than polycarbonate and can be autoclaved repeatedly. Contact-clear tubes allow easy view of contents. Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges. Before autoclaving, just set closure on top…

KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

The Flip-Top centrifuge tube offers a hinged flip top cap that allows for single handed opening and closing. The attached cap provides less chance of dropping or losing a separate cap. Chloroform resistant graduations and frosted writing area allows for permanent identification and labeling.…

These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie

Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…

These 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…

Sterile Skirted bottom for hands-free filling and measuring Highly visible black volume graduations Screw cap design Tubes have white marking spot for easy identification. They are ideal for sample handling and storage. Supplied in sterile bulk packs (25 tubes). Dimensions: 30 mm…

Made from polypropylene DNase/RNase free, Non-pyrogenic Autoclavable

These Costar® 0.65mL microcentrifuge tubes are made of colored polypropylene and are certified RNase-/DNase-free. Rainbow pack includes one bag each of blue, green, yellow, red and orange tubes. Supplied nonsterile and are autoclavable. External graduations and frosted writing spot for easy…

Centrifuge Tube and Rack sets are a convenient solution for organizing and storing Conical Bottom tubes. Racks are made of expanded polystyrene (EPS) and include holes arranged in a zigzag format for easy dispensing. Racks contain 50 of the 15ml tubes or 25 of the 50ml tubes. Sterile tubes are…

Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…

ViewPoint™ tubes are a tool to help you track the real-time temperature of your samples when doing bench work or transferring samples to storage. Virgin Resin - Only 100% Medical Grade polypropylene resins are used in ViewPoint™ Tubes. No recycled plastics or commodity grade…

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens.The 30 mL tube with spork is also widely used in parasitology specimen transport.  Polypropylene…