When your work requires delicate, light-duty wipers to handle precise tasks, Kimtech™ Science Kimwipes, by Kimberly-Clark, are an obvious choice. With a legacy of more than 60 years of being the go-to wipe for cleaning surfaces, parts, instruments in labs, laboratory lenses, and medical…

TekniZorb ™ LX Polycellulose Versatile, absorbent, and low shedding, TekniZorb ™ LX offers the performance needed to restore your controlled environment to its required cleanliness. APPLICATIONS Benchtop liner Product storage solution Spill management Plenum…

M1 polyester knit wipes are made with a hi strength continuous filament polyester yarn in a double knit, no run interlock pattern. A unique quilting pattern is used in the 2-ply polyester wipes for optimum contamination & liquid holding capacity, resulting in the most absorbent, clean &…

Contec’s Anticon Gold StandardWeight wipes are made from 100% continuous filament polyester with a double-knit interlock construction. Anticon Gold StandardWeight uses patented textile technology to achieve superior sorption characteristics for critical applications. The proprietary sealed…

TekniMax ™ DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe. APPLICATIONS Optics & Sensor Cleaning Polishing…

Saturated with DAS Stainless Steel Cleaner and lubricant,12×12, Individually packaged DAS-Wipe 100 is designed to replace silicone on turntables, process lines and as a general lubricant to assure bottles do not stick during movement towards the critical fill site. The wipe material is…

A specialty blend of hemp and cellulose fibers producing a lightweight, low linting tissue. Long fibered, Abaca lightweight cellulose material. Absorbent and soft, contains no synthetic materials. Excellent for use as a table blotter or separator of materials.

PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…

Durx® 770 is ideal for critical small parts cleaning. It can be used for cleaning and maintenance in laboratories, aerospace, electronics, food processing, photo processing, and semiconductor, circuit board, pharmaceutical, and biomedical device manufacture. Durx® 770 is enhanced with…

Pro-Wipe® 750 is solvent resistant with superior absorbency. It makes an excellent upgrade for industrial wiper users. Thermally bonded 60% polypropylene/40% cellulose Highly sorbent and durable No secondary binders Cellulose core provides excellent wicking of solvents …

Valutek’s spunlace non-woven wiper is constructed from a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester. This composite substrate combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic yarn, which has a low level of…

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…

These light weight polyester cellulose wipes offer the essential benefits of a nonwoven in a versatile, economical package. Our exacting manufacturing processes enhance cleanliness for wider ranging applications. Recommended for ISO 5-8 controlled…

Purity, convenience, and validated sterility. Our exacting sterilization process combines aseptic assurance with the cleanliness of a sealed edge knit polyester and the efficiency of 70/30 IPA presaturation. • 10-6 Sterility Assurance Level (SAL) • 70% isopropyl alcohol (IPA), 30%…

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers. MicroQuilt is laser-cut with heatsealed edges and cleanroom laundered…

Lensx® 90 is 100% biodegradable. It is made from 70% rayon and 30% cellulose. Lensx® 90 is engineered for extreme softness and for use in the cleaning of delicate surfaces.  Meets government specification AA-50177, Type 1, Class 1 Burst Strength (PSI/10 sheets dry) 51 Acidity (pH…

Contec’s Slide ‘n Seal Bag is a resealable bag that allows easy dispensing of PROSAT® Polywipe-C presaturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed. Currently,…

Labx® 123 is engineered as a lightweight low lint wiper.  It is 100% biodegradable and made from 100% manila hemp. Engineered for light weight and low linting Meets government specification AA-50177, Type 1, Class 5 light Weight, Wet Strength Applications Tray liner and wet…

M1 Technology Non-Woven Polyester/Cellulose Blend Wipers Description:  Class 1000 Poly/Cel Wiper & Roll Basis Weight: (g/m2) 68 Weight Balance Thickness (mm) 0.30 Caliper Sorptive Capacity Intrinsic (mL/g) 4.20 IEST-RP-CC004.3-8.1 Extrinsic (mL/m2) 332…

Non-sterile 9" x 9" Polyester/cellulose Low endotoxin Dry wiper ISO Class 5 300 Bag x 12 Bags/Case - QTY 3600 Non-sterile 12" x 12" Polyester/cellulose Dry wiper ISO Class 5 150 Bag x 10 Bags/Case - QTY 1500 Non-sterile 4" x…

TexWipe is a strong, double-sided twill-pattern cotton wiper woven in a cross section of 118 x 60 threads per square inch. The product is manufactured with long staple cotton yarn to eliminate free-floating fibers on fabric surface. Features • 100% cotton • Bias cut and tight…

Amplitude™ Sigma™ Plus . This spunlaced fabric is blend of cellulose and polyester. It is highly sorbent and has excellent durability and good cleanliness. A special treatment further enhances sorbency. Excellent for use in general cleaning and spill pickup. All-purpose…

TekniClean ™ LX  Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for…

PROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…

MicroFirst® is the first nonwoven wiper engineered and manufactured specifically for cleanroom applications. It is the ideal choice for cleaning in laboratories, aerospace, electronics, food processing, photo processing and semiconductor, circuit board, pharmaceutical and biomedical device…

Labx® 170 is a cleaner alternative to industrial tissues and wipers. It makes an excellent wafer separator, wet bench liner, laboratory workmat, material packaging and blotter. 80% manila hemp (abaca), 20% wood pulp Engineered as lightweight low lint wafer separator material …

Polywipe-C Wipes are made from a standardweight 100% knitted polyester that is knife cut to create a soft edge. Soft edge is ideal for use on surfaces which are vulnerable to scratching. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for…

Amplitude™ Optic Wipe s The Amplitude Optic wipe is a 100% cellulosic nonwoven wipe. The wipe consists of long staple cellulosic fibers which are wet laid in a papermaking process to form an extremely clean sheet. It features very low extractables levels and moderate particle generation.…

M1 cleanroom wipes are made from a hydroentangled blend of 55% cellulose / 45% polyester. This creates a strong, clean, and very absorbant wipe for liquid removal or lint free wiping of surfaces for contamination removal. This nonwoven wipe exhibits lower particle and fiber release than other…

Our C1 polyester cellulose wipes offer all the advantages of a traditional polycell nonwoven in a cleaner, softer and stronger package. From supporting processes to critical cleaning, these wipes are incredibly versatile. Recommended for ISO 5-8 critical environments.

High Performance for Demanding Applications. Tested for cytotoxicity and bacterial endotoxins for an extra level of contamination control assurance. Designed for high sorption capacity which is ideal for spill control, cleaning, and solution application. Product Specs Size:…