Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic, and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. …

* Strong chaotropic agent useful for the denaturation and subsequent refolding of proteins * Used in the isolation of RNA * Solubilizes insoluble or denatured proteins such as inclusion bodies * Can be used for the recovery of periplasmic proteins

Ferric chloride is a moderately strong Lewis acid and it is used as a catalyst in organic synthesis. The vapor-phase co-reductions with other metal halides by hydrogen results in finely divided intermetallics with applications as structural materials or compounds with useful thermoelectric,…

CAS: 13455-21-5 EC No: 232-151-5 MDL No: MFCD00149929 UN No: UN1812; Haz Class: 6.1; Packing Group: III Crystalline Molecular Formula: KF·2H₂O MW: 94.13 Melting Point: 41° Boiling Point: 156° Density (g/mL): 2.454

Bovine albumin is a single polypeptide chain consisting of approximately 583 to 595 amino acid residues and no carbohydrates. At pH 5-7 it contains 17 intrachain disulfide bridges and 1 sulfhydryl group. Albumin binds water, Ca2+, Na+, and K+. Due to a hydrophobic cleft, albumin binds fatty…

Potassium Iodide is known as Potassium Salt of Hydriodic Acid [HI], available in white crystalline powder form. It is a mild reducing agent and can be easily oxidized to Iodine by powerful oxidizing agent like chlorine. With elemental iodine it forms I3 (tri iodide), the salts of tri iodide are…

CAS: 7558-79-4 EC No: 231-448-7 MDL No: MFCD00003496 RTECS: WC4500000 Powder Molecular Formula: HNa₂O₄P MW: 141.98 Density (g/mL): 1.52

CAS: 7727-54-0 EC No: 231-786-5 MDL No: MFCD00003390 RTECS: SE0350000 UN No: UN1444; Haz Class: 5.1; Packing Group: III Powder Linear Formula: (NH₄)₂S₂O₈ MW: 228.20

CAS: 557-04-0 EC No: 209-150-3 MDL No: MFCD00036391 RTECS: WI4390000 Powder Molecular Formula: C₃₆H₇₀MgO₄ MW: 591.27 Melting Point: 200°

Ferrous sulfate heptahydrate is a reagent used in the manufacturing of iron compounds, in electroplating baths, aluminium etching, process engraving and lithography, and in redox polymerisation. It is used as a reducing agent in chemical processes, leather dyes and writing inks. Also, it is a…

Starch or amylum is a carbohydrate consisting of a large number of glucose units joined by glycosidic bonds. Starch becomes soluble in water when heated. The granules swell and burst, the semi-crystalline structure is lost and the smaller amylose molecules start leaching out of the granule, forming…

SDS is an anionic detergent and wetting agent that is effective in both acid and alkaline solutions. Most proteins bind SDS in a ratio of 1.4 grams SDS to 1 gram protein. The charges intrinsic to the protein become insignificant compared to the overall negative charge provided by the bound SDS. The…

CAS: 22205-45-4 EC No: 244-842-9 MDL No: MFCD00016062 -200 Mesh Powder Molecular Formula: Cu₂S MW: 159.15 Melting Point: 1100° Density (g/mL): 5.6

Ammonium bicarbonate is an inorganic salt commonly used in the food industry. It can be generated by the interaction of gaseous carbon dioxide and aqueous ammonia. The addition of ammonium bicarbonate to microbial fuel cells (MFCs) has been reported to improve its functioning by altering the…

Tris have been useful as buffers in a wide variety of biological systems. It has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). It does not precipitate calcium salts and is of value in maintaining solubility of manganese salts.…

Sodium chloride is a commonly used chemical which is found widely in nature. It is considered to be an essential nutrient. Excess amounts of sodium chloride can destroy electrolyte balance and cause death in most animals, including humans. Sodium chloride is used in a wide variety of biochemical…

CAS: 100-97-0 EC No: 202-905-8 MDL No: MFCD00006895 RTECS: MN4725000 UN No: UN1328; Haz Class: 4.1; Packing Group: III Solid Molecular Formula: C₆H₁₂N₄ MW: 140.19 Melting Point: 280° (sublimes) Flash Point: 250°C (482°F)

CAS: 1310-73-2 EC No: 215-185-5 MDL No: MFCD00003548 UN No: UN1824; Haz Class: 8; Packing Group: II Liquid Linear Formula: NaOH MW: 40.00 Melting Point: -12-10° Boiling Point: 105-140° Density (g/mL): 1.515

MP offers this grade of albumin as a more highly purified product than our traditional True Cohn Fraction V Powder. Due to lower manufacturing costs, this grade is available at a substantial savings relative to our True Cohn Fraction V Powder. Albumin is general blocking reagent in ELISA, as a…

CAS: 7782-63-0 EC No: 231-753-5 MDL No: MFCD00149719 RTECS: NO8510000 Crystalline Linear Formula: FeSO₄·7H₂O MW: 278.02 Density (g/mL): 1.898

CAS: 75-20-7 EC No: 200-848-3 MDL No: MFCD00010905 UN No: UN1402; Haz Class: 4.3; Packing Group: II 9-40mm Lump Linear Formula: CaC₂ MW: 64.10 Density (g/mL): 2.22

CAS: 637-12-7 EC No: 211-279-5 MDL No: MFCD00036389 Powder Molecular Formula: C₅₄H₁₀₅AlO₆ MW: 877.42 Melting Point: 105-115°

CAS: 8002-74-2 EC No: 232-315-6 MDL No: MFCD00132833 RTECS: RV0350000 Solid Melting Point: 53-57°; Boiling Point: 341-665°; Flash Point: 113°C (235°F)

CAS: 12125-02-9 EC No: 235-186-4 MDL No: MFCD00011420 RTECS: BP4550000 Powder Linear Formula: NH₄Cl MW: 53.49 Melting Point: 340° (sublimes)

Benzalkonium Chloride is a quaternary ammonium salt. It is a cationic surface active agent and germicide. It is not effective against gram-negative bacteria or picornaviruses and it is not recommended for treatment of sanitizing critical or semicritical medical instruments. It has been reported…

Sorbose is a ketose belonging to the group of sugars known as monosaccharides. It has a sweetness that is equivalent to sucrose. The commercial production of vitamin C (ascorbic acid) often begins with sorbose. L-Sorbose is used as a starting reagent for the commercial biosynthesis of ascorbic…

Guanidine Hydrochloride is a strong chaotropic agent useful for the denaturation and subsequent refolding of proteins. This strong denaturant can solubilize insoluble or denatured proteins such as inclusion bodies and be used for the recovery of periplasmic proteins. This can be used as the first…

CAS: 7778-18-9 EC No: 231-900-3 MDL No: MFCD00010912 RTECS: WS6920000 Powder Linear Formula: CaSO₄ MW: 136.14

CAS: 10043-52-4 EC No: 233-140-8 MDL No: MFCD00010903 RTECS: EV9800000 Beads/Powder Molecular Formula: CaCl₂ MW: 110.98 Melting Point: 772°

CAS: 57-50-1 EC No: 200-334-9 MDL No: MFCD00006626 RTECS: WN6500000 Crystalline Molecular Formula: C₁₂H₂₂O₁₁ MW: 342.30 Melting Point: 185-187° Density (g/mL): 1.58

Polyvinyl Alcohol (PVA) is a synthetic, biocompatible and toxicologically safe polymer. Polyvinyl alcohol is used for mounting cells on slides for detection of cell-surface antigens by immunofluorescence. It is useful as an anti-fading agent. It has various pharmaceuticle applications. In tablet…