20
-
SOL-CARE IV Catheter with Protector
Sol-MillenniumPassive safety mechanism for the prevention of needlestick injuries Needle bevel is designed for easy insertion that minimizes patient comfort Catheter is made of polyurethane (PUR), allowing for a softer catheter insertion that improves patient comfort Variety of catheter gauges and…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
SYNTHWARE Stainless Steel Cannulas
Kemtech AmericaVarious lengths available, for the tranfer and handling of air sensitive materials.
-
The Dynarex SecureSafe Syringes with Safety Needles provide a sterile, effective way to deliver comfortable injections. All needles are color coded to represent the gauge of the needle and attach to the syringe by either luer lock or luer slip connection. The needles have a double bevel, allowing…
-
The Dynarex SecureSafe Safety Hypodermic Needles provide a sterile, effective way to deliver comfortable injections. All needles are color coded to represent the gauge of the needle are compatible with both luer lock and luer slip syringes. The thin wall needles have a double bevel, allowing for…
-
-
Safety Needle, Bulk, Non-Sterile
Sol-MillenniumThe Sol-Care Safety Needle is designed to help prevent needlestick injuries. Every needle is equipped with a pivoting safety shield mechanism that locks in place to lower the risk of accidental injury. Two options for protective arm activation: hard surface activation and thumb activation …
-
SOL-M Multi-Sample Needle
Sol-MillenniumSOL-M™ Multi-sample Needle makes it possible to collect several samples with a single vein puncture. Low-angle bevel design allows easy penetration. Color-coded caps and hubs allow easy identification of needle gauge size. Compatible with all standard holders. Not made with…
-
Techon Dispensing Tip
OK InternationalThe TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminum locking insert, then molded into polyethylene hubs. molded hub colors correspond to gauge…
-
Safety Needle
Sol-MillenniumSOL-CARE™ safety needle is a needle-based safety device that helps you easily convert from non-safety to safety, protecting healthcare workers from exposed to needle stick injuries. The standard hub is compatible with all standard Luer tip syringe while the reduction of extra dead space…
-
Stainless steel 304 syringe needle
MilliporeSigma304 SS needle with chrome-plated brass Luer hub. Needle is designed with a slightly curved, deflecting tip to prevent coring during needle insertion through the septum. Standard Hub with 304 Stainless Steel Tubing
-
1 mL BD Luer-Lok™ syringe with 20 G x 1 in. BD PrecisionGlide™ needle, regular bevel, regular wall. Detachable needle
-
Techon Flexible Tip
OK InternationalTS-P Series flexible tips allow access to hard-to-reach areas with the added benefit of being able to ''customize'' the length. Benefits of using this tip include resisting Cyanoacrylate clogging and preventing damage to substrates. In addition they are silicone and chloride-free with a maximum…
-
Needle, Pink, High Precision Tip, 20 gauge, 0.5"
Jensen GlobalPink Threaded Luer Lock Hub; 20 gauge 0.5 inch High Precision tip - id inch:0.024(0.600mm) od inch:0.036(0.910mm). Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Needle, High Precision, Pink, 20 gauge, 2"
Jensen GlobalPink Threaded Luer Lock Hub; 20 gauge 2.0 inch High Precision tip. Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.
-
Hypodermic Needle, Bulk, Non-Sterile
Sol-MillenniumThe Sol-M Hypodermic Needle product line features a variety of needle length and gauge sizes. Triple-bevel lubricated stainless steel bevel that minimizes patient discomfort Color-coded hubs for easy gauge identification Compatible with all standard Luer-Lock and Slip Tip syringes
-
Custom HAT NDL Syringes
HamiltonAvailable options: Custom Length: 0.375 to 12 in Point Style: 2, 3, or 4
-
Monoject™ Hypodermic Needles are available as needle only or needle and syringe combinations Features: • Stainless steel lubricated cannula • Color-coded needle hub • Not manufactured with DEHP or natural rubber latex • Sterile,…
-
Deflected Point Septum Penetration Needles
Cadence ScienceThe deflected needle style features point positioning on the axis of the needle lumen. This improved point geometry provides easier penetration and minimizes coring and tracking (particularly with finer gauge needles).
-
Micro-Emulsifying Needles
Cadence ScienceWidely used for allergens and the mixing of adjuvants and antigens, oil based liquids or any two liquid media differing in viscosity. By locking two syringes on to the double hub needle or double hub adapter, two liquids such as a mineral oil and an emulsifying agent may be readily pumped between…
-
Needle, Pink, 20 gauge, 0.5"
Jensen GlobalPInk Threaded Luer Lock Hub; 20 gauge 0.5 inch - id inch:0.025(0.635mm) od inch:0.036(0.9144mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.
-
Flexible yellow gauge needle with polytetrafluoroethylene composition and bonded with a UV-cured adhesive to a polypropylene Luer Lock hub, ideal for scratch-free dispensing of highly sensitive applications.
-
Scalp Vein Sets
EXEL InternationalFlexible wings hold the needle in position and help to prevent inadvertent pull out Thin wall stainless steel cannula, siliconized for easy insertion Color-coded for easier identification Latex Free Individually Packaged 12" tube
-
Syringe - Non-Safety with Needle
DynarexThe Dynarex Syringes with Needle are designed for comfortable injections. The thin wall needles have a double bevel, allowing for ease of penetration and a greater volume of fluid to pass. All needles are color coded to represent the gauge of the needle and attach to the syringe by either luer lock…
-
Hypodermic Needles
Cadence ScienceCadence Science® hypodermic needles are precision made and designed to ensure strict adherence with U.S. Government specification GG-N-196. Points are machine ground to achieve uniform sharpness. Precision grinding, micro-bead jet blasting, and ultrasonic cleaning assure freedom from burrs and…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
10-12cc Syringes with Needles
EXEL InternationalThese products do not contain Natural Rubber Latex. Sterile Non-Toxic Pyrogen Free Positive plunger stop to prevent spillage when drawing Smooth plunger motion
-
-
Laboratory Pipetting Needles with Blunt Ends
Cadence ScienceCadence Science® pipetting needles are available in a wide choice of sizes for use in laboratory procedures. All needles are made with type 304 stainless steel cannulae. Catalog numbers 7950 to 7957 needles are fitted with stainless steel hubs for special applications with corrosive materials…
-
Blunt End Syringe Needles
DWK Life Sciences (Kimble)Syringe needle used as an accessory for Microscale Threaded Standard Taper 14/10 kits. Non-sterile stainless steel needle with an inert plastic hub Blunt end for safety