20 Gauge Needle

PInk Threaded Luer Lock Hub; 20 gauge 0.5 inch - id inch:0.025(0.635mm) od inch:0.036(0.9144mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.

Pink Threaded Luer Lock Hub; 20 gauge 2.0 inch High Precision tip. Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.

Flexible polypropylene tubing for application into difficult-to-access areas. Easily drags along edges and around corners and prevents scratching. Tubing can be cut to length. Manufacturer Part #: 7018201

Pink Threaded Luer Lock Hub; 20 gauge 0.5 inch High Precision tip - id inch:0.024(0.600mm) od inch:0.036(0.910mm). Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

…Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764…

Designed for use for small volumes, these 17 gauge hypodermic needle thermocouples can be inserted through septa into a reaction. They are PTFE coated and sealed at the end for liquid tight applications. Available in 3-1/2 or 7 inch lengths with 72 inches of PTFE coated extension wire. Please…

… Needles are sealed individually; protective plastic sheath is not removed until actual use. Color-coded hub identifies gauge, as follows: 30 gauge needle is beige; 27 gauge, grey; 26 gauge, tan; 25 gauge, blue; 23 gauge, turquoise; 22 gauge, black; 21 gauge, green; 20 gauge, yellow; 18 gauge, pink;…

The Large Hub Removable Needle (RN) is compatible with RN syringes from 250 µL to 10 mL and all SampleLock syringes. Needles are available from 26s to 20 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to…

The Large Hub Removable Needle (RN) is compatible with RN syringes from 250 µL to 10 mL and all SampleLock syringes. Needles are available from 26s to 20 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to…

The Large Hub Removable Needle (RN) is compatible with RN syringes from 250 µL to 10 mL and all SampleLock syringes. Needles are available from 26s to 20 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to…

…disposable single use needles are of the highest quality yet economical. Made of surgical stainless steel with polypropylene hub they are available in a wide range of gauge and length combinations. 15 through 25 gauge are thin wall construction while 27 through 30 gauge are regular wall. FDA…

…0-30 psig High temperature limit switch for safety Digital temperature controller Electronic timer Precision variable valve technology Pressurized cylinder technology Precision needle valve tube assembly Needles, 4 inch x 19 gauge with plated brass hub and stainless steel shaft

…plastic Luer Tip (LT) or Luer Lock (TLL) connectors. These 304 stainless steel needles are packaged in convenient 6 packs and are available from 10-30 gauge. Needle Point Style 3 Blunt needle point for use with HPLC injection valves and for sample pipetting. Available gauges: 34-10.

Hypodermic Needle 23 Gauge 1 Inch Integrated safety cone Sterile Luer lock FDA 510K : K130212 Features: The sharp, effective hypodermic needle has the added benefit of an integrated safety device designed to minimize the risk of accidental needle stick…

…plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs and the standard needles are 51 mm…

…Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the…

Nichrome wire. An 8" aluminum handle with a 3" nichrome wire, 25 gauge. Loop outside diameter is 4mm. Loop inside diameter is 2.5mm. Available with a loop or a needle.

Volume: 25 µL Syringe Type: GASTIGHT Syringe Series: 1700 Termination: Cemented Needle (N) Needle: Cemented Needle Gauge: 22s gauge Length: 2 inch (51 mm) Point Style: 3 Autoclavable: No Fluid Path: SST, Borosilicate…

…adjustable needle exposure of 0 to 20 mm and offer compatibility with most infusion pumps and stereotaxic holders. Needle rigidity improves insertion path accuracy Minimal tissue damage reduces injection variability Reduced sample loss saves money and materials Fine gauge needle…

…Aluminum Crimp Caps (100), 20 mL Clear Glass Screw Top Vials (100), PTFE/Butyl (red) Septa with Steel Magnetic Screw Caps (100), PTFE/Silicone (white) Septa with Steel Magnetic Screw Caps (100), Needle Seal Assemblies (2), O-Rings (10), Pressure Gauge with Needle for Vials (1), Static Headspace…

…each sample position via needle valves Standard Features: Adjustable flow meter, 0-20 L/min High temperature limit switch for safety Dual band spring hoist assembly (except in dry bath model) Precision needle valve tube assembly Needles, 4 inch x 19 gauge with plated brass hub…