Polypropylene, Bottles
-
White Polypropylene Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005”…
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Polypropylene Open-Top Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…
-
50 Position Vial Rack
DWK Life Sciences (Wheaton)50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…
-
15-415 Dropper Tip Caps
DWK Life Sciences (Wheaton)Screw cap made of radiation grade polypropylene Variety of colors Packaged in a case of 100 or 1000
-
Sealing Caps Oak Ridge™ PP / Silicone 63 mm
Thermo Scientific NalgeneThermo Scientific™ Nalgene Sealing Cap Assemblies ensure leakproof service of Nalgene centrifuge bottles at their recommended maximum rated speeds. They are also recommended for use when spinning hazardous materials.
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Polypropylene Dilution Bottles
Thermo Scientific NalgeneResistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
-
-
Test Tube Slant Racks
Thermo Scientific NalgeneIncubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…
-
Polypropylene Screw Closures
Thermo Scientific Nalgene1228A16, A17 and A25 are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks 1228A27 is for use with carboys Autoclavable Available in natural and amber
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…
-
NMR/EPR Tube Racks
SP Wilmad-LabGlassThree styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm.…
-
Colored Polypropylene Caps
DWK Life Sciences (Wheaton)Inner seal ring 45 mm size Caps have built-in, wedge-shaped sealing ring, eliminating the need for a liner. Use with Wheaton Lab 45® media bottles.
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Bulk White Closures
I-ChemLDPE foam-lined white polypropylene cap Bottles sold separately: 013-series and 012-series Recommended for general purpose sampling where cleaning and certification is not required, or ready for your own cleaning and certification procedures Economically bulk packed Includes:…
-
Sealing Cap
Thermo Scientific NalgeneAutoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.
-
Replacement polypropylene open top closures have a bonded-in 0.045” thick septa except for 1709B03, which is a 24-414 open top closure without septa. Choose an I-CHEM® 0.125” thick, 22 mm, PTFE silicone replacement septum to complete the closure system. Thin septa are also available.
-
CryoSure® & MST™ Vial Processing Racks
Caplugs Evergreen®Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.
-
Blue Threaded Luer Lock Hub; 22 gauge 1.25 inch High Precision Taper Tip- id inch:0.017(0.420mm) polypropylene plastic threaded tapered dispensing tip.
-
Closure Stem + Drawtube 28mm
Thermo Scientific NalgeneStem & Draw Tube Closure Applicable with Nalge # 2401-0030, 2401-0060 & 2401-0500
-
White Polypropylene Cap With Teflon Liner
DWK Life Sciences (Wheaton)Ideal for high purity chemicals, strong acids, solvents Excellent for environmental samples, pharmaceuticals and diagnostic reagents Teflon-faced foamed polyethylene liner offers the excellent chemical resistance of Teflon with the compressibility and sealing properties of polyethylene foam.
-
Polypropylene Utility Trays
Thermo Scientific NalgeneUsed to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers