Polypropylene, Bottles
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Polypropylene Open-Top Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…
-
Heavy Duty Vacuum Bottles
Thermo Scientific NalgeneThick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide…
-
Replacement closed-top polypropylene closures and PTFE liners are sold separately and unassembled except for 1709B73, which is a 24-414 size that comes with a bonded-in PTFE-lined silicone liner.
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Narrow Mouth and Wide Mouth Bottle Replacement Closures
Thermo Scientific NalgeneFit Thermo Scientific™ Nalgene™ Narrow Mouth and Wide Mouth Bottle Replacement Closures onto Nalgene narrow mouth and wide mouth bottles.
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
Unwire Polypropylene Test Tube Racks with Handles
Thermo Scientific NalgeneNon-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…
-
Test Tube Slant Racks
Thermo Scientific NalgeneIncubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…
-
Interlocking 20-Place Tube Racks
Heathrow ScientificAttach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…
-
Bulk White Closures
I-ChemLDPE foam-lined white polypropylene cap Bottles sold separately: 013-series and 012-series Recommended for general purpose sampling where cleaning and certification is not required, or ready for your own cleaning and certification procedures Economically bulk packed Includes:…
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Polypropylene Screw Closures
Thermo Scientific NalgeneLinerless closures are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks Autoclavable Available in natural and amber
-
Polypropylene Racks for 12mm and 16mm OD Vials
DWK Life Sciences (Kimble)Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking
-
Polypropylene Dilution Bottles
Thermo Scientific NalgeneResistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…
-
Reversible With lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy…
-
The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…
-
Open-Top Polypropylene Screw Thread Closures with Red
Chase ScientificConvenient assembly of caps and liners Available with standard or pre-slit septa Autoclavable and used for multiple injections
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
58-400 Redi-Cap, PP White, Fmd PE Liner
DWK Life Sciences (Wheaton)Use these caps with WHEATON or other manufacturers# glass bottles or vials White polypropylene screw cap provides clear surface for writing on cap Foamed polyethylene liner provides chemical resistance for acids, alkalis, solvents, alcohols, oils, household cosmetics and aqueous products …
-
Tube and Cuvette Racks
EppendorfOptimize your workflows through user-friendly handling of clearly arranged samples. Eppendorf Tube Racks and Eppendorf Cuvette Racks are ideal for sample processing, transport, and short- to mid-term storage of samples. Well Organized - The Eppendorf Tube Racks and Eppendorf Cuvette Rack …
-
96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…
-
Sol-M® Syringe without Needle
Sol-MillenniumSol-M 3-Piece Syringes accurately measure liquid medications and are available in a wide range of sizes. Sterile, and Individually wrapped in blister packaging. High-transparency barrel to easily visualize contents. Silicone lubrication ensures smooth plunger movement. …
-
20-410 Dropper Tip Caps
DWK Life Sciences (Wheaton)Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000
-
50 Position Vial Rack
DWK Life Sciences (Wheaton)50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…