Glass, Flasks, Ready to Ship
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
KIMAX Kjeldahl Flasks
DWK Life Sciences (Kimble)Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Iodine Flasks
DWK Life Sciences (Kimble)Iodine flask with size 22 stopper Size 22 PTFE standard taper stopper is included A durable matte-finish ceramic enamel marking spot takes writing and erases easily Designed from ASTM Specification E1404, Type II, Class 3 requirements
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
PYREX Erlenmeyer Shaker Flask
CorningDelong style Extra deep baffles These PYREX Delong style shaker culture flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is…
-
PYREX Micro Tubulation Flask
CorningSmall filtering flasks are recommended for microchemical use All flasks have permanent white-enamel marking spots Takes rubber stopper No. 3; 50 mL size, No. 4; 125 mL size, No. 5
-
Thomas Combustion Flask Replacements and Accessories
labForce® (powered by Thomas Scientific)6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.