Glass
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Iodine Flasks
DWK Life Sciences (Kimble)Iodine flask with size 22 stopper Size 22 PTFE standard taper stopper is included A durable matte-finish ceramic enamel marking spot takes writing and erases easily Designed from ASTM Specification E1404, Type II, Class 3 requirements
-
Amber Glass Jugs
I-ChemAmber Type III glass jugs feature a PTFE-lined, polypropylene closure. Jars are suitable for use in water sampling. Recommended for UV light sensitive samples. Certified 200 and 300 series bottles are guaranteed to meet the EPAs Performance Based Specifications for…
-
Graduated Test Tubes with Beaded Rim
DWK Life Sciences (Kimble)Excellent choice for general laboratory use Plain top, beaded rim Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
PYREX Cloning Cylinders
CorningClone a single cell or group of cells by surrounding them with this PYREX® glass open-ended cloning cylinder. Dip the end of the cylinder into sterile silicone grease before pressing to the bottom of a culture dish to create an isolated well. Cylinders are autoclavable or can be dry heat sterilized.
-
-
-
Wheaton Alcohol Burner
DWK Life Sciences (Wheaton)Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…
-
PYREX® Powder Funnels
CorningBeaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively
-
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
Culture, Screw Thread, Borosilicate Glass Tubes
DWK Life Sciences (Kimble)Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…
-
Coplin Staining Jars
DWK Life Sciences (Wheaton)Coplin Staining Jar, 5-10 Slide Unit (8541L01) This unit holds ten 3" x 1" (75 mm x 25 mm) slides, back-to-back that extend above the opening so you can manipulate them without using forceps Polypropylene screw cap The screw cap is made of linerless white polypropylene to…
-
Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.
-
KIMAX Milk Dilution Bottles
DWK Life Sciences (Kimble)Suitable for autoclaving Plastic screw cap with cemented-in rubber liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles…
-
These PYREX® graduated cylinders are calibrated “to contain” (TC). The scale and figures are durable white enamel which stand out clearly against the red color-band on these Lifetime Red™ cylinders. This provides clear, accurate measurements for delivering or containing…
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
E-C Vials w / Rubber Lined Caps, Clear, 8 ml
DWK Life Sciences (Wheaton)Wheaton Sample Vials, 8mL or 0.27oz, Clear, 15-415 Finish with 14B Rubber Liner, Type I Borosilicate Glass (8 mL E-C Vial, Glass Clear, 15-425 Rubber Lined Cap)8 mL E-C Vial, Glass Clear, 15-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged…
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
Flask Only 200 ml
CorningThese PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers.…
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
-
Vacutainer® Fluoride Tubes are used to collect samples for glucose determinations. Venipuncture sampling system which enables sampling directly into a sterile tube One-handed manipulation permits fixing the vein with the free hand System composed of evacuated Vacutainer tube,…
-
300 mL BOD Bottles with Pennyhead Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…
-
-
Polarimeter Tubes
KoehlerInversion Polarimeter Tubes Glass, approximately 9 mm i.d., with threaded, metal ferrule litharge-sealed to tube at each end Metal, cover-glass retaining caps, threaded to attach to ferrule Cap diameters closely controlled to ensure concentricity of tube with optical path in polarimeter …
-
KIMAX Sugar Flasks
DWK Life Sciences (Kimble)Kohlrausch, Class A Borosilicate glass Calibrated to contain 20°C Mouth enlarged for easier introduction of sample Meet NBS requirements
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…
-
PYREX Low Weighing Bottles
CorningShort length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…